[PATCH v2] dt-bindings: serial: Convert socionext,milbeaut-usio-uart to DT schema

[PATCH v2] dt-bindings: serial: Convert socionext,milbeaut-usio-uart to DT schema

[Rob Herring (Arm)]

Convert the Socionext Milbeaut UART binding to DT schema. It is a
straight-forward conversion.

Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
v2:
 - Fix $id path
---
 .../bindings/serial/milbeaut-uart.txt         | 21 -------
 .../serial/socionext,milbeaut-usio-uart.yaml  | 56 +++++++++++++++++++
 2 files changed, 56 insertions(+), 21 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt
 create mode 100644 Documentation/devicetree/bindings/serial/socionext,milbeaut-usio-uart.yaml

diff --git a/Documentation/devicetree/bindings/serial/milbeaut-uart.txt b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
deleted file mode 100644
index 3d2fb1a7ba94..000000000000
--- a/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Socionext Milbeaut UART controller
-
-Required properties:
-- compatible: should be "socionext,milbeaut-usio-uart".
-- reg: offset and length of the register set for the device.
-- interrupts: two interrupts specifier.
-- interrupt-names: should be "rx", "tx".
-- clocks: phandle to the input clock.
-
-Optional properties:
-- auto-flow-control: flow control enable.
-
-Example:
-	usio1: usio_uart@1e700010 {
-		compatible = "socionext,milbeaut-usio-uart";
-		reg = <0x1e700010 0x10>;
-		interrupts = <0 141 0x4>, <0 149 0x4>;
-		interrupt-names = "rx", "tx";
-		clocks = <&clk 2>;
-		auto-flow-control;
-	};
diff --git a/Documentation/devicetree/bindings/serial/socionext,milbeaut-usio-uart.yaml b/Documentation/devicetree/bindings/serial/socionext,milbeaut-usio-uart.yaml
new file mode 100644
index 000000000000..34a997ca2e11
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/socionext,milbeaut-usio-uart.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/socionext,milbeaut-usio-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext Milbeaut UART controller
+
+maintainers:
+  - Sugaya Taichi <sugaya.taichi@socionext.com>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    const: socionext,milbeaut-usio-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: RX interrupt specifier
+      - description: TX interrupt specifier
+
+  interrupt-names:
+    items:
+      - const: rx
+      - const: tx
+
+  clocks:
+    maxItems: 1
+
+  auto-flow-control:
+    description: Enable automatic flow control.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@1e700010 {
+        compatible = "socionext,milbeaut-usio-uart";
+        reg = <0x1e700010 0x10>;
+        interrupts = <0 141 0x4>, <0 149 0x4>;
+        interrupt-names = "rx", "tx";
+        clocks = <&clk 2>;
+        auto-flow-control;
+    };
-- 
2.47.2

Re: [PATCH v2] dt-bindings: serial: Convert socionext,milbeaut-usio-uart to DT schema

[Greg Kroah-Hartman]

On Wed, May 07, 2025 at 10:49:22AM -0500, Rob Herring (Arm) wrote:
> Convert the Socionext Milbeaut UART binding to DT schema. It is a
> straight-forward conversion.
> 
> Reviewed-by: Thierry Reding <treding@nvidia.com>
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
> ---
> v2:
>  - Fix $id path
> ---
>  .../bindings/serial/milbeaut-uart.txt         | 21 -------
>  .../serial/socionext,milbeaut-usio-uart.yaml  | 56 +++++++++++++++++++
>  2 files changed, 56 insertions(+), 21 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt
>  create mode 100644 Documentation/devicetree/bindings/serial/socionext,milbeaut-usio-uart.yaml

Are you wanting all of these serial "convert to dt schema" patches to go
through the tty/serial tree, or will you be taking them?  Either is fine
with me, your choice.

thanks,

greg k-h

Re: [PATCH v2] dt-bindings: serial: Convert socionext,milbeaut-usio-uart to DT schema

[Rob Herring]

On Fri, May 9, 2025 at 9:51 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Wed, May 07, 2025 at 10:49:22AM -0500, Rob Herring (Arm) wrote:
> > Convert the Socionext Milbeaut UART binding to DT schema. It is a
> > straight-forward conversion.
> >
> > Reviewed-by: Thierry Reding <treding@nvidia.com>
> > Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
> > ---
> > v2:
> >  - Fix $id path
> > ---
> >  .../bindings/serial/milbeaut-uart.txt         | 21 -------
> >  .../serial/socionext,milbeaut-usio-uart.yaml  | 56 +++++++++++++++++++
> >  2 files changed, 56 insertions(+), 21 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt
> >  create mode 100644 Documentation/devicetree/bindings/serial/socionext,milbeaut-usio-uart.yaml
>
> Are you wanting all of these serial "convert to dt schema" patches to go
> through the tty/serial tree, or will you be taking them?  Either is fine
> with me, your choice.

You can take them. With all of them, we're done converting serial drivers!

Rob

Re: [PATCH v2] dt-bindings: serial: Convert socionext,milbeaut-usio-uart to DT schema

[Greg Kroah-Hartman]

On Fri, May 09, 2025 at 10:29:07AM -0500, Rob Herring wrote:
> On Fri, May 9, 2025 at 9:51 AM Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > On Wed, May 07, 2025 at 10:49:22AM -0500, Rob Herring (Arm) wrote:
> > > Convert the Socionext Milbeaut UART binding to DT schema. It is a
> > > straight-forward conversion.
> > >
> > > Reviewed-by: Thierry Reding <treding@nvidia.com>
> > > Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
> > > ---
> > > v2:
> > >  - Fix $id path
> > > ---
> > >  .../bindings/serial/milbeaut-uart.txt         | 21 -------
> > >  .../serial/socionext,milbeaut-usio-uart.yaml  | 56 +++++++++++++++++++
> > >  2 files changed, 56 insertions(+), 21 deletions(-)
> > >  delete mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt
> > >  create mode 100644 Documentation/devicetree/bindings/serial/socionext,milbeaut-usio-uart.yaml
> >
> > Are you wanting all of these serial "convert to dt schema" patches to go
> > through the tty/serial tree, or will you be taking them?  Either is fine
> > with me, your choice.
> 
> You can take them. With all of them, we're done converting serial drivers!

Ok, I'll queue them up in a day or so, thanks!

greg k-h