[PATCH v3 10/19] dt-bindings: media: i2c: max96712: deprecate enable-gpios

[Cosmin Tanislav <demonsingur@gmail.com>]

The MAX96712 actually has a GPIO named PWDNB, which will put the chip
in reset state when held low. Esentially, it works as an enable GPIO,
but the naming is different.

Deprecate the enable-gpios property, and add powerdown-gpios as the
rest of the GMSL chips.

Change the example to use powerdown-gpios.

Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
---
 .../devicetree/bindings/media/i2c/maxim,max96712.yaml  | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
index b345305acc4c..e38213209973 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
@@ -35,7 +35,13 @@ properties:
     description: I2C device address
     maxItems: 1
 
-  enable-gpios: true
+  enable-gpios:
+    maxItems: 1
+    deprecated: true
+
+  powerdown-gpios:
+    maxItems: 1
+    description: Specifier for the GPIO connected to the PWDNB pin.
 
   i2c-alias-pool:
     maxItems: 4
@@ -128,7 +134,7 @@ examples:
             gmsl0: gmsl-deserializer@49 {
                     compatible = "maxim,max96712";
                     reg = <0x49>;
-                    enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+                    powerdown-gpios = <&pca9654_a 0 GPIO_ACTIVE_LOW>;
 
                     ports {
                             #address-cells = <1>;
-- 
2.49.0