[PATCH 2/3] ARM: dts: imx7s-warp: Improve the Wifi description

[Fabio Estevam <festevam@gmail.com>]

GPIO5_10 is connected to the BCM43455 WL_REG_ON pin and it is better
descrbed via mmc-pwrseq-simple.yaml.

Also improve the Wifi devicetree description by passing a compatible
string that describes the BCM43455 presence as per brcm,bcm4329-fmac.yaml.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
 arch/arm/boot/dts/nxp/imx/imx7s-warp.dts | 29 +++++++++++++-----------
 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
index b66e612d3329..f2cd95e992e7 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
@@ -31,18 +31,6 @@ back {
 		};
 	};
 
-	reg_brcm: regulator-brcm {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_brcm_reg>;
-		regulator-name = "brcm_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-
 	reg_peri_3p15v: regulator-peri-3p15v {
 		compatible = "regulator-fixed";
 		regulator-name = "peri_3p15v_reg";
@@ -51,6 +39,14 @@ reg_peri_3p15v: regulator-peri-3p15v {
 		regulator-always-on;
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "imx7-sgtl5000";
@@ -301,14 +297,21 @@ &usbotg1 {
 };
 
 &usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	bus-width = <4>;
 	keep-power-in-suspend;
 	no-1-8-v;
 	non-removable;
-	vmmc-supply = <&reg_brcm>;
+	mmc-pwrseq = <&sdio_pwrseq>;
 	status = "okay";
+
+	wifi@0 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
 };
 
 &usdhc3 {
-- 
2.34.1