[PATCH v9 1/9] dt-bindings: PCI: Add STM32MP25 PCIe Root Complex bindings

[Christian Bruel <christian.bruel@foss.st.com>]

Document the bindings for STM32MP25 PCIe Controller configured in
root complex mode with one root port.

Supports 4 INTx and MSI interrupts from the ARM GICv2m controller.

STM32 PCIe may be in a power domain which is the case for the STM32MP25
based boards.

Supports WAKE# from wake-gpios

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 .../bindings/pci/st,stm32-pcie-common.yaml    |  33 ++++++
 .../bindings/pci/st,stm32-pcie-host.yaml      | 112 ++++++++++++++++++
 2 files changed, 145 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml

diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
new file mode 100644
index 000000000000..5adbff259204
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/st,stm32-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP25 PCIe RC/EP controller
+
+maintainers:
+  - Christian Bruel <christian.bruel@foss.st.com>
+
+description:
+  STM32MP25 PCIe RC/EP common properties
+
+properties:
+  clocks:
+    maxItems: 1
+    description: PCIe system clock
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  access-controllers:
+    maxItems: 1
+
+required:
+  - clocks
+  - resets
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
new file mode 100644
index 000000000000..443bfe2cdc98
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/st,stm32-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32MP25 PCIe Root Complex
+
+maintainers:
+  - Christian Bruel <christian.bruel@foss.st.com>
+
+description:
+  PCIe root complex controller based on the Synopsys DesignWare PCIe core.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - $ref: /schemas/pci/st,stm32-pcie-common.yaml#
+
+properties:
+  compatible:
+    const: st,stm32mp25-pcie-rc
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: PCIe configuration registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+
+  msi-parent:
+    maxItems: 1
+
+patternProperties:
+  '^pcie@[0-2],0$':
+    type: object
+    $ref: /schemas/pci/pci-pci-bridge.yaml#
+
+    properties:
+      reg:
+        maxItems: 1
+
+      phys:
+        maxItems: 1
+
+      reset-gpios:
+        description: GPIO controlled connection to PERST# signal
+        maxItems: 1
+
+      wake-gpios:
+        description: GPIO used as WAKE# input signal
+        maxItems: 1
+
+    required:
+      - phys
+      - ranges
+
+    unevaluatedProperties: false
+
+required:
+  - interrupt-map
+  - interrupt-map-mask
+  - ranges
+  - dma-ranges
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+
+    pcie@48400000 {
+        compatible = "st,stm32mp25-pcie-rc";
+        device_type = "pci";
+        reg = <0x48400000 0x400000>,
+              <0x10000000 0x10000>;
+        reg-names = "dbi", "config";
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 2 &intc 0 0 GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 3 &intc 0 0 GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 4 &intc 0 0 GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x01000000 0x0 0x00000000 0x10010000 0x0 0x10000>,
+                 <0x02000000 0x0 0x10020000 0x10020000 0x0 0x7fe0000>,
+                 <0x42000000 0x0 0x18000000 0x18000000 0x0 0x8000000>;
+        dma-ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x80000000>;
+        clocks = <&rcc CK_BUS_PCIE>;
+        resets = <&rcc PCIE_R>;
+        msi-parent = <&v2m0>;
+        access-controllers = <&rifsc 68>;
+        power-domains = <&CLUSTER_PD>;
+
+        pcie@0,0 {
+            device_type = "pci";
+            reg = <0x0 0x0 0x0 0x0 0x0>;
+            phys = <&combophy PHY_TYPE_PCIE>;
+            wake-gpios = <&gpioh 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+            reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            ranges;
+        };
+    };
-- 
2.34.1