[PATCH v10 0/9] Add STM32MP25 PCIe drivers

[PATCH v10 0/9] Add STM32MP25 PCIe drivers

[Christian Bruel]

Changes in v10;
   - Update pcie_ep bindings with dbi2 and atu regs,
     thus remove Reviewed-by and Acked-by.
   
Changes in v9:
   - Describe atu and dbi2 shadowed registers in pcie_ep node
   Address RC and EP drivers comments from Manivanna:
   - Use dev_error_probe() for pm_runtime_enable() calls
   - Reword Kconfig help message
   - Move pm_runtime_get_noresume() before devm_pm_runtime_enable()

Changes in v8:
   - Whitespace in comment
   
Changes in v7:
   - Use device_init_wakeup to enable wakeup
   - Fix comments (Bjorn)

Changes in v6:
   - Call device_wakeup_enable() to fix WAKE# wakeup.
   Address comments from Manivanna:
   - Fix/Add Comments
   - Fix DT indents
   - Remove dw_pcie_ep_linkup() in EP start link
   - Add PCIE_T_PVPERL_MS delay in RC PERST# deassert
   
Changes in v5:
   Address driver comments from Manivanna:
   - Use dw_pcie_{suspend/resume}_noirq instead of private ones.
   - Move dw_pcie_host_init() to probe
   - Add stm32_remove_pcie_port cleanup function
   - Use of_node_put in stm32_pcie_parse_port
   - Remove wakeup-source property
   - Use generic dev_pm_set_dedicated_wake_irq to support wake# irq
   
Changes in v4:
   Address bindings comments Rob Herring
   - Remove phy property form common yaml
   - Remove phy-name property
   - Move wake_gpio and reset_gpio to the host root port
   
Changes in v3:
   Address comments from Manivanna, Rob and Bjorn:
   - Move host wakeup helper to dwc core (Mani)
   - Drop num-lanes=<1> from bindings (Rob)
   - Fix PCI address of I/O region (Mani)
   - Moved PHY to a RC rootport subsection (Bjorn, Mani)
   - Replaced dma-limit quirk by dma-ranges property (Bjorn)
   - Moved out perst assert/deassert from start/stop link (Mani)
   - Drop link_up test optim (Mani)
   - DT and comments rephrasing (Bjorn)
   - Add dts entries now that the combophy entries has landed
   - Drop delaying Configuration Requests

Changes in v2:
   - Fix st,stm32-pcie-common.yaml dt_binding_check	

Changes in v1:
   Address comments from Rob Herring and Bjorn Helgaas:
   - Drop st,limit-mrrs and st,max-payload-size from this patchset
   - Remove single reset and clocks binding names and misc yaml cleanups
   - Split RC/EP common bindings to a separate schema file
   - Use correct PCIE_T_PERST_CLK_US and PCIE_T_RRS_READY_MS defines
   - Use .remove instead of .remove_new
   - Fix bar reset sequence in EP driver
   - Use cleanup blocks for error handling
   - Cosmetic fixes

Christian Bruel (9):
  dt-bindings: PCI: Add STM32MP25 PCIe Root Complex bindings
  PCI: stm32: Add PCIe host support for STM32MP25
  dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
  PCI: stm32: Add PCIe Endpoint support for STM32MP25
  MAINTAINERS: add entry for ST STM32MP25 PCIe drivers
  arm64: dts: st: add PCIe pinctrl entries in stm32mp25-pinctrl.dtsi
  arm64: dts: st: Add PCIe Root Complex mode on stm32mp251
  arm64: dts: st: Add PCIe Endpoint mode on stm32mp251
  arm64: dts: st: Enable PCIe on the stm32mp257f-ev1 board

 .../bindings/pci/st,stm32-pcie-common.yaml    |  33 ++
 .../bindings/pci/st,stm32-pcie-ep.yaml        |  73 ++++
 .../bindings/pci/st,stm32-pcie-host.yaml      | 112 +++++
 MAINTAINERS                                   |   7 +
 arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi |  20 +
 arch/arm64/boot/dts/st/stm32mp251.dtsi        |  59 +++
 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts    |  21 +
 drivers/pci/controller/dwc/Kconfig            |  24 +
 drivers/pci/controller/dwc/Makefile           |   2 +
 drivers/pci/controller/dwc/pcie-stm32-ep.c    | 411 ++++++++++++++++++
 drivers/pci/controller/dwc/pcie-stm32.c       | 364 ++++++++++++++++
 drivers/pci/controller/dwc/pcie-stm32.h       |  16 +
 12 files changed, 1142 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32-ep.c
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32.c
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32.h


base-commit: aa94665adc28f3fdc3de2979ac1e98bae961d6ca
-- 
2.34.1

[PATCH v10 1/9] dt-bindings: PCI: Add STM32MP25 PCIe Root Complex bindings

[Christian Bruel]

Document the bindings for STM32MP25 PCIe Controller configured in
root complex mode with one root port.

Supports 4 INTx and MSI interrupts from the ARM GICv2m controller.

STM32 PCIe may be in a power domain which is the case for the STM32MP25
based boards.

Supports WAKE# from wake-gpios

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 .../bindings/pci/st,stm32-pcie-common.yaml    |  33 ++++++
 .../bindings/pci/st,stm32-pcie-host.yaml      | 112 ++++++++++++++++++
 2 files changed, 145 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml

diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
new file mode 100644
index 000000000000..5adbff259204
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/st,stm32-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP25 PCIe RC/EP controller
+
+maintainers:
+  - Christian Bruel <christian.bruel@foss.st.com>
+
+description:
+  STM32MP25 PCIe RC/EP common properties
+
+properties:
+  clocks:
+    maxItems: 1
+    description: PCIe system clock
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  access-controllers:
+    maxItems: 1
+
+required:
+  - clocks
+  - resets
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
new file mode 100644
index 000000000000..443bfe2cdc98
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/st,stm32-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32MP25 PCIe Root Complex
+
+maintainers:
+  - Christian Bruel <christian.bruel@foss.st.com>
+
+description:
+  PCIe root complex controller based on the Synopsys DesignWare PCIe core.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - $ref: /schemas/pci/st,stm32-pcie-common.yaml#
+
+properties:
+  compatible:
+    const: st,stm32mp25-pcie-rc
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: PCIe configuration registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+
+  msi-parent:
+    maxItems: 1
+
+patternProperties:
+  '^pcie@[0-2],0$':
+    type: object
+    $ref: /schemas/pci/pci-pci-bridge.yaml#
+
+    properties:
+      reg:
+        maxItems: 1
+
+      phys:
+        maxItems: 1
+
+      reset-gpios:
+        description: GPIO controlled connection to PERST# signal
+        maxItems: 1
+
+      wake-gpios:
+        description: GPIO used as WAKE# input signal
+        maxItems: 1
+
+    required:
+      - phys
+      - ranges
+
+    unevaluatedProperties: false
+
+required:
+  - interrupt-map
+  - interrupt-map-mask
+  - ranges
+  - dma-ranges
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+
+    pcie@48400000 {
+        compatible = "st,stm32mp25-pcie-rc";
+        device_type = "pci";
+        reg = <0x48400000 0x400000>,
+              <0x10000000 0x10000>;
+        reg-names = "dbi", "config";
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 2 &intc 0 0 GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 3 &intc 0 0 GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 4 &intc 0 0 GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x01000000 0x0 0x00000000 0x10010000 0x0 0x10000>,
+                 <0x02000000 0x0 0x10020000 0x10020000 0x0 0x7fe0000>,
+                 <0x42000000 0x0 0x18000000 0x18000000 0x0 0x8000000>;
+        dma-ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x80000000>;
+        clocks = <&rcc CK_BUS_PCIE>;
+        resets = <&rcc PCIE_R>;
+        msi-parent = <&v2m0>;
+        access-controllers = <&rifsc 68>;
+        power-domains = <&CLUSTER_PD>;
+
+        pcie@0,0 {
+            device_type = "pci";
+            reg = <0x0 0x0 0x0 0x0 0x0>;
+            phys = <&combophy PHY_TYPE_PCIE>;
+            wake-gpios = <&gpioh 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+            reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            ranges;
+        };
+    };
-- 
2.34.1

[PATCH v10 2/9] PCI: stm32: Add PCIe host support for STM32MP25

[Christian Bruel]

Add driver for the STM32MP25 SoC PCIe Gen1 2.5 GT/s and Gen2 5GT/s
controller based on the DesignWare PCIe core.

Supports MSI via GICv2m, Single Virtual Channel, Single Function

Supports WAKE# GPIO.

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 drivers/pci/controller/dwc/Kconfig      |  12 +
 drivers/pci/controller/dwc/Makefile     |   1 +
 drivers/pci/controller/dwc/pcie-stm32.c | 364 ++++++++++++++++++++++++
 drivers/pci/controller/dwc/pcie-stm32.h |  15 +
 4 files changed, 392 insertions(+)
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32.c
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32.h

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index d9f0386396ed..387151f25f5f 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -410,6 +410,18 @@ config PCIE_SPEAR13XX
 	help
 	  Say Y here if you want PCIe support on SPEAr13XX SoCs.
 
+config PCIE_STM32_HOST
+	tristate "STMicroelectronics STM32MP25 PCIe Controller (host mode)"
+	depends on ARCH_STM32 || COMPILE_TEST
+	depends on PCI_MSI
+	select PCIE_DW_HOST
+	help
+	  Enables Root Complex (RC) support for the DesignWare core based PCIe
+	  controller found in STM32MP25 SoC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called pcie-stm32.
+
 config PCI_DRA7XX
 	tristate
 
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index 908cb7f345db..9d3b43504725 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
 obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
 obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
 obj-$(CONFIG_PCIE_RCAR_GEN4) += pcie-rcar-gen4.o
+obj-$(CONFIG_PCIE_STM32_HOST) += pcie-stm32.o
 
 # The following drivers are for devices that use the generic ACPI
 # pci_root.c driver but don't support standard ECAM config access.
diff --git a/drivers/pci/controller/dwc/pcie-stm32.c b/drivers/pci/controller/dwc/pcie-stm32.c
new file mode 100644
index 000000000000..f08c81a5797f
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-stm32.c
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics STM32MP25 PCIe root complex driver.
+ *
+ * Copyright (C) 2025 STMicroelectronics
+ * Author: Christian Bruel <christian.bruel@foss.st.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/pinctrl/devinfo.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include "pcie-designware.h"
+#include "pcie-stm32.h"
+#include "../../pci.h"
+
+struct stm32_pcie {
+	struct dw_pcie pci;
+	struct regmap *regmap;
+	struct reset_control *rst;
+	struct phy *phy;
+	struct clk *clk;
+	struct gpio_desc *perst_gpio;
+	struct gpio_desc *wake_gpio;
+};
+
+static void stm32_pcie_deassert_perst(struct stm32_pcie *stm32_pcie)
+{
+	/* Delay PERST# de-assertion until the power stabilizes */
+	msleep(PCIE_T_PVPERL_MS);
+
+	gpiod_set_value(stm32_pcie->perst_gpio, 0);
+
+	/* Wait for the REFCLK to stabilize */
+	if (stm32_pcie->perst_gpio)
+		msleep(PCIE_T_RRS_READY_MS);
+}
+
+static void stm32_pcie_assert_perst(struct stm32_pcie *stm32_pcie)
+{
+	gpiod_set_value(stm32_pcie->perst_gpio, 1);
+}
+
+static int stm32_pcie_start_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+
+	return regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+				  STM32MP25_PCIECR_LTSSM_EN,
+				  STM32MP25_PCIECR_LTSSM_EN);
+}
+
+static void stm32_pcie_stop_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+			   STM32MP25_PCIECR_LTSSM_EN, 0);
+}
+
+static int stm32_pcie_suspend_noirq(struct device *dev)
+{
+	struct stm32_pcie *stm32_pcie = dev_get_drvdata(dev);
+	int ret;
+
+	ret = dw_pcie_suspend_noirq(&stm32_pcie->pci);
+	if (ret)
+		return ret;
+
+	stm32_pcie_assert_perst(stm32_pcie);
+
+	clk_disable_unprepare(stm32_pcie->clk);
+
+	if (!device_wakeup_path(dev))
+		phy_exit(stm32_pcie->phy);
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int stm32_pcie_resume_noirq(struct device *dev)
+{
+	struct stm32_pcie *stm32_pcie = dev_get_drvdata(dev);
+	int ret;
+
+	/*
+	 * The core clock is gated with CLKREQ# from the COMBOPHY REFCLK,
+	 * thus if no device is present, must force it low with an init pinmux
+	 * to be able to access the DBI registers.
+	 */
+	if (!IS_ERR(dev->pins->init_state))
+		ret = pinctrl_select_state(dev->pins->p, dev->pins->init_state);
+	else
+		ret = pinctrl_pm_select_default_state(dev);
+
+	if (ret) {
+		dev_err(dev, "Failed to activate pinctrl pm state: %d\n", ret);
+		return ret;
+	}
+
+	if (!device_wakeup_path(dev)) {
+		ret = phy_init(stm32_pcie->phy);
+		if (ret) {
+			pinctrl_pm_select_default_state(dev);
+			return ret;
+		}
+	}
+
+	ret = clk_prepare_enable(stm32_pcie->clk);
+	if (ret)
+		goto err_phy_exit;
+
+	stm32_pcie_deassert_perst(stm32_pcie);
+
+	ret = dw_pcie_resume_noirq(&stm32_pcie->pci);
+	if (ret)
+		goto err_disable_clk;
+
+	pinctrl_pm_select_default_state(dev);
+
+	return 0;
+
+err_disable_clk:
+	stm32_pcie_assert_perst(stm32_pcie);
+	clk_disable_unprepare(stm32_pcie->clk);
+
+err_phy_exit:
+	phy_exit(stm32_pcie->phy);
+	pinctrl_pm_select_default_state(dev);
+
+	return ret;
+}
+
+static const struct dev_pm_ops stm32_pcie_pm_ops = {
+	NOIRQ_SYSTEM_SLEEP_PM_OPS(stm32_pcie_suspend_noirq,
+				  stm32_pcie_resume_noirq)
+};
+
+static const struct dw_pcie_host_ops stm32_pcie_host_ops = {
+};
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.start_link = stm32_pcie_start_link,
+	.stop_link = stm32_pcie_stop_link
+};
+
+static int stm32_add_pcie_port(struct stm32_pcie *stm32_pcie,
+			       struct platform_device *pdev)
+{
+	struct device *dev = stm32_pcie->pci.dev;
+	unsigned int wake_irq;
+	int ret;
+
+	/* Start to enable resources with PERST# asserted */
+
+	ret = phy_set_mode(stm32_pcie->phy, PHY_MODE_PCIE);
+	if (ret)
+		return ret;
+
+	ret = phy_init(stm32_pcie->phy);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+				 STM32MP25_PCIECR_TYPE_MASK,
+				 STM32MP25_PCIECR_RC);
+	if (ret)
+		goto err_phy_exit;
+
+	stm32_pcie_deassert_perst(stm32_pcie);
+
+	if (stm32_pcie->wake_gpio) {
+		wake_irq = gpiod_to_irq(stm32_pcie->wake_gpio);
+		ret = dev_pm_set_dedicated_wake_irq(dev, wake_irq);
+		if (ret) {
+			dev_err(dev, "Failed to enable wakeup irq %d\n", ret);
+			goto err_assert_perst;
+		}
+		irq_set_irq_type(wake_irq, IRQ_TYPE_EDGE_FALLING);
+	}
+
+	return 0;
+
+err_assert_perst:
+	stm32_pcie_assert_perst(stm32_pcie);
+
+err_phy_exit:
+	phy_exit(stm32_pcie->phy);
+
+	return ret;
+}
+
+static void stm32_remove_pcie_port(struct stm32_pcie *stm32_pcie)
+{
+	stm32_pcie_assert_perst(stm32_pcie);
+
+	phy_exit(stm32_pcie->phy);
+}
+
+static int stm32_pcie_parse_port(struct stm32_pcie *stm32_pcie)
+{
+	struct device *dev = stm32_pcie->pci.dev;
+	struct device_node *root_port;
+
+	root_port = of_get_next_available_child(dev->of_node, NULL);
+
+	stm32_pcie->phy = devm_of_phy_get(dev, root_port, NULL);
+	if (IS_ERR(stm32_pcie->phy)) {
+		of_node_put(root_port);
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->phy),
+				     "Failed to get pcie-phy\n");
+	}
+
+	stm32_pcie->perst_gpio = devm_fwnode_gpiod_get(dev, of_fwnode_handle(root_port),
+						       "reset", GPIOD_OUT_HIGH, NULL);
+	if (IS_ERR(stm32_pcie->perst_gpio)) {
+		if (PTR_ERR(stm32_pcie->perst_gpio) != -ENOENT) {
+			of_node_put(root_port);
+			return dev_err_probe(dev, PTR_ERR(stm32_pcie->perst_gpio),
+					     "Failed to get reset GPIO\n");
+		}
+		stm32_pcie->perst_gpio = NULL;
+	}
+
+	stm32_pcie->wake_gpio = devm_fwnode_gpiod_get(dev, of_fwnode_handle(root_port),
+						      "wake", GPIOD_IN, NULL);
+
+	if (IS_ERR(stm32_pcie->wake_gpio)) {
+		if (PTR_ERR(stm32_pcie->wake_gpio) != -ENOENT) {
+			of_node_put(root_port);
+			return dev_err_probe(dev, PTR_ERR(stm32_pcie->wake_gpio),
+					     "Failed to get wake GPIO\n");
+		}
+		stm32_pcie->wake_gpio = NULL;
+	}
+
+	of_node_put(root_port);
+
+	return 0;
+}
+
+static int stm32_pcie_probe(struct platform_device *pdev)
+{
+	struct stm32_pcie *stm32_pcie;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	stm32_pcie = devm_kzalloc(dev, sizeof(*stm32_pcie), GFP_KERNEL);
+	if (!stm32_pcie)
+		return -ENOMEM;
+
+	stm32_pcie->pci.dev = dev;
+	stm32_pcie->pci.ops = &dw_pcie_ops;
+	stm32_pcie->pci.pp.ops = &stm32_pcie_host_ops;
+
+	stm32_pcie->regmap = syscon_regmap_lookup_by_compatible("st,stm32mp25-syscfg");
+	if (IS_ERR(stm32_pcie->regmap))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->regmap),
+				     "No syscfg specified\n");
+
+	stm32_pcie->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(stm32_pcie->clk))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->clk),
+				     "Failed to get PCIe clock source\n");
+
+	stm32_pcie->rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(stm32_pcie->rst))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->rst),
+				     "Failed to get PCIe reset\n");
+
+	ret = stm32_pcie_parse_port(stm32_pcie);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, stm32_pcie);
+
+	ret = pm_runtime_set_active(dev);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to activate runtime PM\n");
+
+	pm_runtime_get_noresume(dev);
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
+
+	ret = stm32_add_pcie_port(stm32_pcie, pdev);
+	if (ret) {
+		pm_runtime_put_noidle(&pdev->dev);
+		return ret;
+	}
+
+	reset_control_assert(stm32_pcie->rst);
+	reset_control_deassert(stm32_pcie->rst);
+
+	ret = clk_prepare_enable(stm32_pcie->clk);
+	if (ret) {
+		dev_err(dev, "Core clock enable failed %d\n", ret);
+		goto err_remove_port;
+	}
+
+	ret = dw_pcie_host_init(&stm32_pcie->pci.pp);
+	if (ret)
+		goto err_disable_clk;
+
+	if (stm32_pcie->wake_gpio)
+		device_init_wakeup(dev, true);
+
+	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(stm32_pcie->clk);
+
+err_remove_port:
+	stm32_remove_pcie_port(stm32_pcie);
+	pm_runtime_put_noidle(&pdev->dev);
+
+	return ret;
+}
+
+static void stm32_pcie_remove(struct platform_device *pdev)
+{
+	struct stm32_pcie *stm32_pcie = platform_get_drvdata(pdev);
+	struct dw_pcie_rp *pp = &stm32_pcie->pci.pp;
+
+	if (stm32_pcie->wake_gpio)
+		device_init_wakeup(&pdev->dev, false);
+
+	dw_pcie_host_deinit(pp);
+
+	clk_disable_unprepare(stm32_pcie->clk);
+
+	stm32_remove_pcie_port(stm32_pcie);
+
+	pm_runtime_put_noidle(&pdev->dev);
+}
+
+static const struct of_device_id stm32_pcie_of_match[] = {
+	{ .compatible = "st,stm32mp25-pcie-rc" },
+	{},
+};
+
+static struct platform_driver stm32_pcie_driver = {
+	.probe = stm32_pcie_probe,
+	.remove = stm32_pcie_remove,
+	.driver = {
+		.name = "stm32-pcie",
+		.of_match_table = stm32_pcie_of_match,
+		.pm = &stm32_pcie_pm_ops,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+
+module_platform_driver(stm32_pcie_driver);
+
+MODULE_AUTHOR("Christian Bruel <christian.bruel@foss.st.com>");
+MODULE_DESCRIPTION("STM32MP25 PCIe Controller driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, stm32_pcie_of_match);
diff --git a/drivers/pci/controller/dwc/pcie-stm32.h b/drivers/pci/controller/dwc/pcie-stm32.h
new file mode 100644
index 000000000000..387112c4e42c
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-stm32.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ST PCIe driver definitions for STM32-MP25 SoC
+ *
+ * Copyright (C) 2025 STMicroelectronics - All Rights Reserved
+ * Author: Christian Bruel <christian.bruel@foss.st.com>
+ */
+
+#define to_stm32_pcie(x)	dev_get_drvdata((x)->dev)
+
+#define STM32MP25_PCIECR_TYPE_MASK	GENMASK(11, 8)
+#define STM32MP25_PCIECR_LTSSM_EN	BIT(2)
+#define STM32MP25_PCIECR_RC		BIT(10)
+
+#define SYSCFG_PCIECR			0x6000
-- 
2.34.1

[PATCH v10 3/9] dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings

[Christian Bruel]

STM32MP25 PCIe Controller is based on the DesignWare core configured as
end point mode from the SYSCFG register.

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 .../bindings/pci/st,stm32-pcie-ep.yaml        | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml

diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
new file mode 100644
index 000000000000..6edccaa73034
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/st,stm32-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32MP25 PCIe Endpoint
+
+maintainers:
+  - Christian Bruel <christian.bruel@foss.st.com>
+
+description:
+  PCIe endpoint controller based on the Synopsys DesignWare PCIe core.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+  - $ref: /schemas/pci/st,stm32-pcie-common.yaml#
+
+properties:
+  compatible:
+    const: st,stm32mp25-pcie-ep
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: Data Bus Interface (DBI) shadow registers.
+      - description: Internal Address Translation Unit (iATU) registers.
+      - description: PCIe configuration registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: atu
+      - const: addr_space
+
+  reset-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+required:
+  - phys
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+
+    pcie-ep@48400000 {
+        compatible = "st,stm32mp25-pcie-ep";
+        reg = <0x48400000 0x400000>,
+              <0x48500000 0x100000>,
+              <0x48700000 0x80000>,
+              <0x10000000 0x8000000>;
+        reg-names = "dbi", "dbi2", "atu", "addr_space";
+        clocks = <&rcc CK_BUS_PCIE>;
+        phys = <&combophy PHY_TYPE_PCIE>;
+        resets = <&rcc PCIE_R>;
+        pinctrl-names = "default", "init";
+        pinctrl-0 = <&pcie_pins_a>;
+        pinctrl-1 = <&pcie_init_pins_a>;
+        reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+        access-controllers = <&rifsc 68>;
+        power-domains = <&CLUSTER_PD>;
+    };
-- 
2.34.1

[PATCH v10 4/9] PCI: stm32: Add PCIe Endpoint support for STM32MP25

[Christian Bruel]

Add driver to configure the STM32MP25 SoC PCIe Gen1 2.5GT/s or Gen2 5GT/s
controller based on the DesignWare PCIe core in endpoint mode.

Uses the common reference clock provided by the host.

The PCIe core_clk receives the pipe0_clk from the ComboPHY as input,
and the ComboPHY PLL must be locked for pipe0_clk to be ready.
Consequently, PCIe core registers cannot be accessed until the ComboPHY is
fully initialised and refclk is enabled and ready.

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 drivers/pci/controller/dwc/Kconfig         |  12 +
 drivers/pci/controller/dwc/Makefile        |   1 +
 drivers/pci/controller/dwc/pcie-stm32-ep.c | 411 +++++++++++++++++++++
 drivers/pci/controller/dwc/pcie-stm32.h    |   1 +
 4 files changed, 425 insertions(+)
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32-ep.c

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 387151f25f5f..72b9c50c1dfd 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -422,6 +422,18 @@ config PCIE_STM32_HOST
 	  This driver can also be built as a module. If so, the module
 	  will be called pcie-stm32.
 
+config PCIE_STM32_EP
+	tristate "STMicroelectronics STM32MP25 PCIe Controller (endpoint mode)"
+	depends on ARCH_STM32 || COMPILE_TEST
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	help
+	  Enables Endpoint (EP) support for the DesignWare core based PCIe
+	  controller found in STM32MP25 SoC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called pcie-stm32-ep.
+
 config PCI_DRA7XX
 	tristate
 
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index 9d3b43504725..85ec6804a299 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
 obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
 obj-$(CONFIG_PCIE_RCAR_GEN4) += pcie-rcar-gen4.o
 obj-$(CONFIG_PCIE_STM32_HOST) += pcie-stm32.o
+obj-$(CONFIG_PCIE_STM32_EP) += pcie-stm32-ep.o
 
 # The following drivers are for devices that use the generic ACPI
 # pci_root.c driver but don't support standard ECAM config access.
diff --git a/drivers/pci/controller/dwc/pcie-stm32-ep.c b/drivers/pci/controller/dwc/pcie-stm32-ep.c
new file mode 100644
index 000000000000..867826511319
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-stm32-ep.c
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics STM32MP25 PCIe endpoint driver.
+ *
+ * Copyright (C) 2025 STMicroelectronics
+ * Author: Christian Bruel <christian.bruel@foss.st.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include "pcie-designware.h"
+#include "pcie-stm32.h"
+
+enum stm32_pcie_ep_link_status {
+	STM32_PCIE_EP_LINK_DISABLED,
+	STM32_PCIE_EP_LINK_ENABLED,
+};
+
+struct stm32_pcie {
+	struct dw_pcie pci;
+	struct regmap *regmap;
+	struct reset_control *rst;
+	struct phy *phy;
+	struct clk *clk;
+	struct gpio_desc *perst_gpio;
+	enum stm32_pcie_ep_link_status link_status;
+	unsigned int perst_irq;
+};
+
+static void stm32_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	enum pci_barno bar;
+
+	for (bar = 0; bar < PCI_STD_NUM_BARS; bar++)
+		dw_pcie_ep_reset_bar(pci, bar);
+}
+
+static int stm32_pcie_enable_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+			   STM32MP25_PCIECR_LTSSM_EN,
+			   STM32MP25_PCIECR_LTSSM_EN);
+
+	return dw_pcie_wait_for_link(pci);
+}
+
+static void stm32_pcie_disable_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR, STM32MP25_PCIECR_LTSSM_EN, 0);
+}
+
+static int stm32_pcie_start_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+	int ret;
+
+	if (stm32_pcie->link_status == STM32_PCIE_EP_LINK_ENABLED) {
+		dev_dbg(pci->dev, "Link is already enabled\n");
+		return 0;
+	}
+
+	ret = stm32_pcie_enable_link(pci);
+	if (ret) {
+		dev_err(pci->dev, "PCIe cannot establish link: %d\n", ret);
+		return ret;
+	}
+
+	stm32_pcie->link_status = STM32_PCIE_EP_LINK_ENABLED;
+
+	enable_irq(stm32_pcie->perst_irq);
+
+	return 0;
+}
+
+static void stm32_pcie_stop_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+
+	if (stm32_pcie->link_status == STM32_PCIE_EP_LINK_DISABLED) {
+		dev_dbg(pci->dev, "Link is already disabled\n");
+		return;
+	}
+
+	disable_irq(stm32_pcie->perst_irq);
+
+	stm32_pcie_disable_link(pci);
+
+	stm32_pcie->link_status = STM32_PCIE_EP_LINK_DISABLED;
+}
+
+static int stm32_pcie_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
+				unsigned int type, u16 interrupt_num)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	switch (type) {
+	case PCI_IRQ_INTX:
+		return dw_pcie_ep_raise_intx_irq(ep, func_no);
+	case PCI_IRQ_MSI:
+		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
+	default:
+		dev_err(pci->dev, "UNKNOWN IRQ type\n");
+		return -EINVAL;
+	}
+}
+
+static const struct pci_epc_features stm32_pcie_epc_features = {
+	.msi_capable = true,
+	.align = SZ_64K,
+};
+
+static const struct pci_epc_features*
+stm32_pcie_get_features(struct dw_pcie_ep *ep)
+{
+	return &stm32_pcie_epc_features;
+}
+
+static const struct dw_pcie_ep_ops stm32_pcie_ep_ops = {
+	.init = stm32_pcie_ep_init,
+	.raise_irq = stm32_pcie_raise_irq,
+	.get_features = stm32_pcie_get_features,
+};
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.start_link = stm32_pcie_start_link,
+	.stop_link = stm32_pcie_stop_link,
+};
+
+static int stm32_pcie_enable_resources(struct stm32_pcie *stm32_pcie)
+{
+	int ret;
+
+	ret = phy_init(stm32_pcie->phy);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(stm32_pcie->clk);
+	if (ret)
+		phy_exit(stm32_pcie->phy);
+
+	return ret;
+}
+
+static void stm32_pcie_disable_resources(struct stm32_pcie *stm32_pcie)
+{
+	clk_disable_unprepare(stm32_pcie->clk);
+
+	phy_exit(stm32_pcie->phy);
+}
+
+static void stm32_pcie_perst_assert(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+	struct dw_pcie_ep *ep = &stm32_pcie->pci.ep;
+	struct device *dev = pci->dev;
+
+	dev_dbg(dev, "PERST asserted by host\n");
+
+	if (stm32_pcie->link_status == STM32_PCIE_EP_LINK_DISABLED) {
+		dev_dbg(pci->dev, "Link is already disabled\n");
+		return;
+	}
+
+	pci_epc_deinit_notify(ep->epc);
+
+	stm32_pcie_disable_resources(stm32_pcie);
+
+	pm_runtime_put_sync(dev);
+
+	stm32_pcie->link_status = STM32_PCIE_EP_LINK_DISABLED;
+}
+
+static void stm32_pcie_perst_deassert(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+	struct device *dev = pci->dev;
+	struct dw_pcie_ep *ep = &pci->ep;
+	int ret;
+
+	if (stm32_pcie->link_status == STM32_PCIE_EP_LINK_ENABLED) {
+		dev_dbg(pci->dev, "Link is already enabled\n");
+		return;
+	}
+
+	dev_dbg(dev, "PERST de-asserted by host\n");
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to resume runtime PM: %d\n", ret);
+		return;
+	}
+
+	ret = stm32_pcie_enable_resources(stm32_pcie);
+	if (ret) {
+		dev_err(dev, "Failed to enable resources: %d\n", ret);
+		goto err_pm_put_sync;
+	}
+
+	/*
+	 * Need to reprogram the configuration space registers here because the
+	 * DBI registers were incorrectly reset by the PHY RCC during phy_init().
+	 */
+	ret = dw_pcie_ep_init_registers(ep);
+	if (ret) {
+		dev_err(dev, "Failed to complete initialization: %d\n", ret);
+		goto err_disable_resources;
+	}
+
+	pci_epc_init_notify(ep->epc);
+
+	stm32_pcie->link_status = STM32_PCIE_EP_LINK_ENABLED;
+
+	return;
+
+err_disable_resources:
+	stm32_pcie_disable_resources(stm32_pcie);
+
+err_pm_put_sync:
+	pm_runtime_put_sync(dev);
+}
+
+static irqreturn_t stm32_pcie_ep_perst_irq_thread(int irq, void *data)
+{
+	struct stm32_pcie *stm32_pcie = data;
+	struct dw_pcie *pci = &stm32_pcie->pci;
+	u32 perst;
+
+	perst = gpiod_get_value(stm32_pcie->perst_gpio);
+	if (perst)
+		stm32_pcie_perst_assert(pci);
+	else
+		stm32_pcie_perst_deassert(pci);
+
+	return IRQ_HANDLED;
+}
+
+static int stm32_add_pcie_ep(struct stm32_pcie *stm32_pcie,
+			     struct platform_device *pdev)
+{
+	struct dw_pcie_ep *ep = &stm32_pcie->pci.ep;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+				 STM32MP25_PCIECR_TYPE_MASK,
+				 STM32MP25_PCIECR_EP);
+	if (ret)
+		return ret;
+
+	reset_control_assert(stm32_pcie->rst);
+	reset_control_deassert(stm32_pcie->rst);
+
+	ep->ops = &stm32_pcie_ep_ops;
+
+	ret = dw_pcie_ep_init(ep);
+	if (ret) {
+		dev_err(dev, "Failed to initialize ep: %d\n", ret);
+		return ret;
+	}
+
+	ret = stm32_pcie_enable_resources(stm32_pcie);
+	if (ret) {
+		dev_err(dev, "Failed to enable resources: %d\n", ret);
+		goto err_ep_deinit;
+	}
+
+	ret = dw_pcie_ep_init_registers(ep);
+	if (ret) {
+		dev_err(dev, "Failed to initialize DWC endpoint registers\n");
+		goto err_disable_resources;
+	}
+
+	pci_epc_init_notify(ep->epc);
+
+	return 0;
+
+err_disable_resources:
+	stm32_pcie_disable_resources(stm32_pcie);
+
+err_ep_deinit:
+	dw_pcie_ep_deinit(ep);
+
+	return ret;
+}
+
+static int stm32_pcie_probe(struct platform_device *pdev)
+{
+	struct stm32_pcie *stm32_pcie;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	stm32_pcie = devm_kzalloc(dev, sizeof(*stm32_pcie), GFP_KERNEL);
+	if (!stm32_pcie)
+		return -ENOMEM;
+
+	stm32_pcie->pci.dev = dev;
+	stm32_pcie->pci.ops = &dw_pcie_ops;
+
+	stm32_pcie->regmap = syscon_regmap_lookup_by_compatible("st,stm32mp25-syscfg");
+	if (IS_ERR(stm32_pcie->regmap))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->regmap),
+				     "No syscfg specified\n");
+
+	stm32_pcie->phy = devm_phy_get(dev, NULL);
+	if (IS_ERR(stm32_pcie->phy))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->phy),
+				     "failed to get pcie-phy\n");
+
+	stm32_pcie->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(stm32_pcie->clk))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->clk),
+				     "Failed to get PCIe clock source\n");
+
+	stm32_pcie->rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(stm32_pcie->rst))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->rst),
+				     "Failed to get PCIe reset\n");
+
+	stm32_pcie->perst_gpio = devm_gpiod_get(dev, "reset", GPIOD_IN);
+	if (IS_ERR(stm32_pcie->perst_gpio))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->perst_gpio),
+				     "Failed to get reset GPIO\n");
+
+	ret = phy_set_mode(stm32_pcie->phy, PHY_MODE_PCIE);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, stm32_pcie);
+
+	pm_runtime_get_noresume(dev);
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&pdev->dev);
+		return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
+	}
+
+	stm32_pcie->perst_irq = gpiod_to_irq(stm32_pcie->perst_gpio);
+
+	/* Will be enabled in start_link when device is initialized. */
+	irq_set_status_flags(stm32_pcie->perst_irq, IRQ_NOAUTOEN);
+
+	ret = devm_request_threaded_irq(dev, stm32_pcie->perst_irq, NULL,
+					stm32_pcie_ep_perst_irq_thread,
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					"perst_irq", stm32_pcie);
+	if (ret) {
+		dev_err(dev, "Failed to request PERST IRQ: %d\n", ret);
+		pm_runtime_put_noidle(&pdev->dev);
+		return ret;
+	}
+
+	ret = stm32_add_pcie_ep(stm32_pcie, pdev);
+	if (ret)
+		pm_runtime_put_noidle(&pdev->dev);
+
+	return ret;
+}
+
+static void stm32_pcie_remove(struct platform_device *pdev)
+{
+	struct stm32_pcie *stm32_pcie = platform_get_drvdata(pdev);
+	struct dw_pcie *pci = &stm32_pcie->pci;
+	struct dw_pcie_ep *ep = &pci->ep;
+
+	if (stm32_pcie->link_status == STM32_PCIE_EP_LINK_ENABLED) {
+		disable_irq(stm32_pcie->perst_irq);
+		stm32_pcie_disable_link(pci);
+	}
+
+	pci_epc_deinit_notify(ep->epc);
+	dw_pcie_ep_deinit(ep);
+
+	stm32_pcie_disable_resources(stm32_pcie);
+
+	pm_runtime_put_sync(&pdev->dev);
+}
+
+static const struct of_device_id stm32_pcie_ep_of_match[] = {
+	{ .compatible = "st,stm32mp25-pcie-ep" },
+	{},
+};
+
+static struct platform_driver stm32_pcie_ep_driver = {
+	.probe = stm32_pcie_probe,
+	.remove = stm32_pcie_remove,
+	.driver = {
+		.name = "stm32-ep-pcie",
+		.of_match_table = stm32_pcie_ep_of_match,
+	},
+};
+
+module_platform_driver(stm32_pcie_ep_driver);
+
+MODULE_AUTHOR("Christian Bruel <christian.bruel@foss.st.com>");
+MODULE_DESCRIPTION("STM32MP25 PCIe Endpoint Controller driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, stm32_pcie_ep_of_match);
diff --git a/drivers/pci/controller/dwc/pcie-stm32.h b/drivers/pci/controller/dwc/pcie-stm32.h
index 387112c4e42c..09d39f04e469 100644
--- a/drivers/pci/controller/dwc/pcie-stm32.h
+++ b/drivers/pci/controller/dwc/pcie-stm32.h
@@ -9,6 +9,7 @@
 #define to_stm32_pcie(x)	dev_get_drvdata((x)->dev)
 
 #define STM32MP25_PCIECR_TYPE_MASK	GENMASK(11, 8)
+#define STM32MP25_PCIECR_EP		0
 #define STM32MP25_PCIECR_LTSSM_EN	BIT(2)
 #define STM32MP25_PCIECR_RC		BIT(10)
 
-- 
2.34.1

[PATCH v10 5/9] MAINTAINERS: add entry for ST STM32MP25 PCIe drivers

[Christian Bruel]

Add myself as maintainer of STM32MP25 PCIe host and PCIe endpoint drivers

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index d74250b2e8e6..2140f668a3c2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18912,6 +18912,13 @@ L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
 F:	drivers/pci/controller/dwc/pci-exynos.c
 
+PCI DRIVER FOR STM32MP25
+M:	Christian Bruel <christian.bruel@foss.st.com>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/st,stm32-pcie-*.yaml
+F:	drivers/pci/controller/dwc/*stm32*
+
 PCI DRIVER FOR SYNOPSYS DESIGNWARE
 M:	Jingoo Han <jingoohan1@gmail.com>
 M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-- 
2.34.1

[PATCH v10 6/9] arm64: dts: st: add PCIe pinctrl entries in stm32mp25-pinctrl.dtsi

[Christian Bruel]

Add PCIe pinctrl entries in stm32mp25-pinctrl.dtsi
init: forces GPIO to low while probing so CLKREQ is low for
phy_init
default: restore the AFMUX after controller probe

Add Analog pins of PCIe to perform power cycle

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index aba90d555f4e..0480b9af00e8 100644
--- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -133,6 +133,26 @@ pins {
 		};
 	};
 
+	pcie_pins_a: pcie-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 0, AF4)>;
+			bias-disable;
+		};
+	};
+
+	pcie_init_pins_a: pcie-init-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 0, GPIO)>;
+			output-low;
+		};
+	};
+
+	pcie_sleep_pins_a: pcie-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 0, ANALOG)>;
+		};
+	};
+
 	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */
-- 
2.34.1

[PATCH v10 7/9] arm64: dts: st: Add PCIe Root Complex mode on stm32mp251

[Christian Bruel]

Add pcie_rc node to support STM32 MP25 PCIe driver based on the
DesignWare PCIe core configured as Root Complex mode

Supports Gen1/Gen2, single lane, MSI interrupts using the ARM GICv2m

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp251.dtsi | 44 ++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index d6993d3dc14d..7978fd640e1e 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -122,6 +122,15 @@ intc: interrupt-controller@4ac00000 {
 		      <0x0 0x4ac20000 0x0 0x20000>,
 		      <0x0 0x4ac40000 0x0 0x20000>,
 		      <0x0 0x4ac60000 0x0 0x20000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		v2m0: v2m@48090000 {
+			compatible = "arm,gic-v2m-frame";
+			reg = <0x0 0x48090000 0x0 0x1000>;
+			msi-controller;
+		};
 	};
 
 	psci {
@@ -953,6 +962,41 @@ stmmac_axi_config_1: stmmac-axi-config {
 					snps,wr_osr_lmt = <0x7>;
 				};
 			};
+
+			pcie_rc: pcie@48400000 {
+				compatible = "st,stm32mp25-pcie-rc";
+				device_type = "pci";
+				reg = <0x48400000 0x400000>,
+				      <0x10000000 0x10000>;
+				reg-names = "dbi", "config";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+						<0 0 0 2 &intc 0 0 GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+						<0 0 0 3 &intc 0 0 GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+						<0 0 0 4 &intc 0 0 GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x00000000 0x10010000 0x0 0x10000>,
+					 <0x02000000 0x0 0x10020000 0x10020000 0x0 0x7fe0000>,
+					 <0x42000000 0x0 0x18000000 0x18000000 0x0 0x8000000>;
+				dma-ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x80000000>;
+				clocks = <&rcc CK_BUS_PCIE>;
+				resets = <&rcc PCIE_R>;
+				msi-parent = <&v2m0>;
+				access-controllers = <&rifsc 68>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				pcie@0,0 {
+					device_type = "pci";
+					reg = <0x0 0x0 0x0 0x0 0x0>;
+					phys = <&combophy PHY_TYPE_PCIE>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+				};
+			};
 		};
 
 		bsec: efuse@44000000 {
-- 
2.34.1

[PATCH v10 8/9] arm64: dts: st: Add PCIe Endpoint mode on stm32mp251

[Christian Bruel]

Add pcie_ep node to support STM32 MP25 PCIe driver based on the
DesignWare PCIe core configured as Endpoint mode

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp251.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 7978fd640e1e..6d54ed9a1052 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -963,6 +963,21 @@ stmmac_axi_config_1: stmmac-axi-config {
 				};
 			};
 
+			pcie_ep: pcie-ep@48400000 {
+				compatible = "st,stm32mp25-pcie-ep";
+				reg = <0x48400000 0x100000>,
+				      <0x48500000 0x100000>,
+				      <0x48700000 0x80000>,
+				      <0x10000000 0x8000000>;
+				reg-names = "dbi", "dbi2", "atu", "addr_space";
+				clocks = <&rcc CK_BUS_PCIE>;
+				resets = <&rcc PCIE_R>;
+				phys = <&combophy PHY_TYPE_PCIE>;
+				access-controllers = <&rifsc 68>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+			};
+
 			pcie_rc: pcie@48400000 {
 				compatible = "st,stm32mp25-pcie-rc";
 				device_type = "pci";
-- 
2.34.1

[PATCH v10 9/9] arm64: dts: st: Enable PCIe on the stm32mp257f-ev1 board

[Christian Bruel]

Add PCIe RC and EP support on stm32mp257f-ev1 board.
Default to RC mode.

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 9d1a1155e36c..85f99a1ca154 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -257,6 +257,27 @@ scmi_vdd_sdcard: regulator@23 {
 	};
 };
 
+&pcie_ep {
+	pinctrl-names = "default", "init";
+	pinctrl-0 = <&pcie_pins_a>;
+	pinctrl-1 = <&pcie_init_pins_a>;
+	reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&pcie_rc {
+	pinctrl-names = "default", "init", "sleep";
+	pinctrl-0 = <&pcie_pins_a>;
+	pinctrl-1 = <&pcie_init_pins_a>;
+	pinctrl-2 = <&pcie_sleep_pins_a>;
+	status = "okay";
+
+	pcie@0,0 {
+		 reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+		 wake-gpios = <&gpioh 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	};
+};
+
 &sdmmc1 {
 	pinctrl-names = "default", "opendrain", "sleep";
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-- 
2.34.1

Re: [PATCH v10 3/9] dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings

[Rob Herring (Arm)]

On Wed, 14 May 2025 16:44:22 +0200, Christian Bruel wrote:
> STM32MP25 PCIe Controller is based on the DesignWare core configured as
> end point mode from the SYSCFG register.
> 
> Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
> ---
>  .../bindings/pci/st,stm32-pcie-ep.yaml        | 73 +++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>