[PATCH v5 0/3] [PATCH v5 0/3] Add device tree support for Luckfox Omni3576 and Core3576

[PATCH v5 0/3] [PATCH v5 0/3] Add device tree support for Luckfox Omni3576 and Core3576

[John Clark]

Subject: [PATCH v5 0/3] Add device tree support for Luckfox Omni3576 and Core3576

This series adds device tree support for the Luckfox Omni3576 Carrier
Board with the Core3576 Module, powered by the Rockchip RK3576 SoC
(four Cortex-A72 cores, four Cortex-A53 cores, Mali-G52 MC3 GPU). It
enables essential functionality for booting Linux and basic connectivity,
with plans for future support of peripherals like WiFi, MIPI-DSI, HDMI,
and Ethernet.

Tested features (on Linux 6.15-rc4):
 - UART: Serial console operational
 - SD card: Mounts and reads/writes successfully
 - PCIe: NVMe SSD detected, mounted, and fully functional
 - USB 2.0: Host ports operational
 - RTC: Timekeeping and wake-up tested
 - LED: Heartbeat trigger functional
 - eMMC: Enabled in device tree, not populated on tested hardware

The series includes three patches:
 1. dt-bindings: vendor-prefixes: Add Luckfox vendor prefix
 2. dt-bindings: arm: rockchip: Add Luckfox Omni3576 and Core3576 bindings
 3. arm64: dts: rockchip: Add Luckfox Omni3576 board support

The device tree is covered by the existing ROCKCHIP ARCHITECTURE entry in
MAINTAINERS. I am aware of ongoing RK3576 upstreaming efforts (e.g., by
Collabora) and welcome feedback or collaboration to align with mainline
driver development.

Changes in v5:
 - Patch 1: Moved luckfox vendor prefix to correct alphabetical position
   between lsi and lunzn (Quentin Schulz, v4).
   Acked-by: Conor Dooley <conor.dooley@microchip.com>
   Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 - Patch 2: Unchanged from v4.
   Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
   Acked-by: Rob Herring (Arm) <robh@kernel.org>
 - Patch 3:
   - Updated copyright to include John Clark (Quentin Schulz, v4).
   - Reordered top-level nodes alphabetically per DTS coding style
     (Quentin Schulz, v4).
   - Reordered CPU node overrides to match alphabetical order (cpu_bX
     before cpu_lX) (Quentin Schulz, v4).
   - Moved mmc0 alias to rk3576-luckfox-core3576.dtsi for module-level
     eMMC; kept mmc1 in rk3576-luckfox-omni3576.dts for board-specific
     SD (Quentin Schulz, v4).
   - Added regulator-state-mem to top-level regulator-fixed nodes with
     blank lines, omitting deprecated regulator-suspend-microvolt; PMIC
     regulators retain regulator-suspend-microvolt to preserve Luckfox
     SDK behavior, with a future patch planned after RK806 driver
     validation (Quentin Schulz, v4).
   - Removed redundant max-frequency from &sdmmc, as it matches
     rk3576.dtsi (Quentin Schulz, v4).
   - Added vmmc-supply and vqmmc-supply to &sdhci to support eMMC (Jonas
     Karlman, v2).
   - Confirmed blank line style compliance across DTSI and DTS (Jonas
     Karlman, v2).

Changes in v4:
 - Patch 1: Unchanged, Acked-by: Conor Dooley.
 - Patch 2: Fixed binding for Omni3576 to use correct enum syntax (enum:
   [luckfox,omni3576]), added luckfox,core3576 to compatible string
   (Heiko Stuebner, v3).
 - Patch 3: Updated compatible string in rk3576-luckfox-omni3576.dts to
   match revised binding.

Changes in v3:
 - Split device tree into rk3576-luckfox-core3576.dtsi and
   rk3576-luckfox-omni3576.dts for modularity (Jonas Karlman, v2).
 - Patch 3:
   - Added pinctrl for green LED GPIO (Jonas Karlman, v2).
   - Reordered regulator node properties for consistency (Jonas
     Karlman, v2).
   - Used gpios instead of deprecated gpio in regulators (Jonas
     Karlman, v2).
   - Removed vendor-specific pmic-power-off pinctrl and pwrkey from
     RK806 PMIC (Jonas Karlman, v2).
   - Removed no-mmc from &sdmmc to enable MMC support (Jonas Karlman, v2).
   - Removed Ethernet nodes (gmac0/gmac1) due to unreliable PHY driver
     (Andrew Lunn, v2).
   - Addressed DTB warnings within scope (Rob Herring, v2).
   - Added RNG node per Nicolas Frattaroli’s patch (v3).

Changes in v2:
 - Enabled HDMI node, untested due to driver issues (Heiko Stuebner,
   Nicolas Frattaroli, v1).
 - Enabled Ethernet 1 node, removed in v3 (Heiko Stuebner, v1).
 - Clarified eMMC enabled but unpopulated (Heiko Stuebner, v1).
 - Patch 1: Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 - Patch 2: Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Signed-off-by: John Clark <inindev@gmail.com>
---
John Clark (3):
 dt-bindings: vendor-prefixes: Add luckfox prefix
 dt-bindings: arm: rockchip: Add Luckfox Omni3576 and Core3576 bindings
 arm64: dts: rockchip: Add Luckfox Omni3576 Board support

 .../devicetree/bindings/arm/rockchip.yaml     |   7 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3576-luckfox-core3576.dtsi | 748 ++++++++++++++++++
 .../dts/rockchip/rk3576-luckfox-omni3576.dts  |  50 ++
 5 files changed, 808 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-luckfox-omni3576.dts

-- 
2.39.5

[PATCH v5 1/3] dt-bindings: vendor-prefixes: Add luckfox prefix

[John Clark]

Add vendor prefix for Shenzhen Luckfox Technology Co., Ltd., which
produces development boards like the Luckfox Omni3576.

Signed-off-by: John Clark <inindev@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 86f6a19b28ae..4fc73fbd592b 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -884,6 +884,8 @@ patternProperties:
     description: Nanjing Loongmasses Ltd.
   "^lsi,.*":
     description: LSI Corp. (LSI Logic)
+  "^luckfox,.*":
+    description: Shenzhen Luckfox Technology Co., Ltd.
   "^lunzn,.*":
     description: Shenzhen Lunzn Technology Co., Ltd.
   "^luxul,.*":
-- 
2.39.5

[PATCH v5 2/3] dt-bindings: arm: rockchip: Add Luckfox Omni3576 and Core3576 bindings

[John Clark]

Add device tree binding for Luckfox Core3576 Module based boards,
specifically the Luckfox Omni3576, with compatibility for the Rockchip
RK3576 SoC.

Signed-off-by: John Clark <inindev@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 5772d905f390..6e0b6e49a3bc 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -715,6 +715,13 @@ properties:
           - const: lckfb,tspi-rk3566
           - const: rockchip,rk3566
 
+      - description: Luckfox Core3576 Module based boards
+        items:
+          - enum:
+              - luckfox,omni3576
+          - const: luckfox,core3576
+          - const: rockchip,rk3576
+
       - description: Lunzn FastRhino R66S / R68S
         items:
           - enum:
-- 
2.39.5

[PATCH v5 3/3] arm64: dts: rockchip: Add Luckfox Omni3576 Board support

[John Clark]

Add device tree for the Luckfox Omni3576 Carrier Board with Core3576
Module, powered by the Rockchip RK3576 SoC with four Cortex-A72 cores,
four Cortex-A53 cores, and a Mali-G52 MC3 GPU. This initial
implementation enables essential functionality for booting Linux and
basic connectivity.

Supported and tested features:
 - UART for serial console
 - SD card for storage
 - PCIe with NVMe SSD (detected, mounted, and fully functional)
 - USB 2.0 host ports
 - RK806 PMIC for power management
 - RTC with timekeeping and wake-up
 - GPIO-controlled LED with heartbeat trigger
 - eMMC (enabled, not populated on tested board)

The device tree provides a foundation for further peripheral support, such
as WiFi, MIPI-DSI, HDMI, and Ethernet, in future updates.

Tested on Linux 6.15-rc4

Based on the Luckfox SDK, which derives from Rockchip’s SDK examples, with
relevant changes to align with upstream Linux.

Signed-off-by: John Clark <inindev@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3576-luckfox-core3576.dtsi | 749 ++++++++++++++++++
 .../dts/rockchip/rk3576-luckfox-omni3576.dts  |  51 ++
 3 files changed, 801 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-luckfox-omni3576.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 4bf84622db47..7fccebb7cdef 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -144,6 +144,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-luckfox-omni3576.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-rock-4d.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi
new file mode 100644
index 000000000000..9187012d6fa4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi
@@ -0,0 +1,749 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2025 John Clark <inindev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3576.dtsi"
+
+/ {
+	model = "Luckfox Core3576 Module";
+	compatible = "luckfox,core3576","rockchip,rk3576";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		hdmi-pwr-supply = <&vcc_5v0_hdmi>;
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vbus_5v0_typec: regulator-vbus-5v0-typec {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg0_pwr_en>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vbus5v0_typec";
+		vin-supply = <&vcc_5v0_device>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-name = "vcc_1v1_nldo_s3";
+		vin-supply = <&vcc_5v0_sys>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <2000000>;
+		regulator-name = "vcc_2v0_pldo_s3";
+		vin-supply = <&vcc_5v0_sys>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	vcc_3v3_pcie: regulator-vcc-3v3-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_pcie";
+		startup-delay-us = <1000>;
+		vin-supply = <&vcc_5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_3v3_rtc_s5: regulator-vcc-3v3-rtc-s5 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_rtc_s5";
+		vin-supply = <&vcc_5v0_sys>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	vcc_5v0_dcin: regulator-vcc-5v0-dcin {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_dcin";
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	vcc_5v0_device: regulator-vcc-5v0-device {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_device";
+		vin-supply = <&vcc_5v0_dcin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_5v0_hdmi: regulator-vcc-5v0-hdmi {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_con_en>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_hdmi";
+		vin-supply = <&vcc_5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_5v0_host: regulator-vcc-5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwr_en>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_host";
+		vin-supply = <&vcc_5v0_device>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_5v0_sys: regulator-vcc-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_sys";
+		vin-supply = <&vcc_5v0_dcin>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdptxphy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic@23 {
+		compatible = "rockchip,rk806";
+		reg = <0x23>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc_5v0_sys>;
+		vcc2-supply = <&vcc_5v0_sys>;
+		vcc3-supply = <&vcc_5v0_sys>;
+		vcc4-supply = <&vcc_5v0_sys>;
+		vcc5-supply = <&vcc_5v0_sys>;
+		vcc6-supply = <&vcc_5v0_sys>;
+		vcc7-supply = <&vcc_5v0_sys>;
+		vcc8-supply = <&vcc_5v0_sys>;
+		vcc9-supply = <&vcc_5v0_sys>;
+		vcc10-supply = <&vcc_5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc_5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc_5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs1_slp: dvs1-slp-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs1_rst: dvs1-rst-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_slp: dvs2-slp-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs2_rst: dvs2-rst-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_dvs: dvs2-dvs-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs2_gpio: dvs2-gpio-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun5";
+		};
+
+
+		rk806_dvs3_slp: dvs3-slp-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs3_rst: dvs3-rst-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs3_dvs: dvs3-dvs-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs3_gpio: dvs3-gpio-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun5";
+		};
+
+		regulators {
+			vdd_cpu_big_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_npu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_gpu_s0: dcdc-reg5 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-name = "vdd_logic_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo2_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdda_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v75_hdmi_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <837500>;
+				regulator-max-microvolt = <837500>;
+				regulator-name = "vdda0v75_hdmi_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdda_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset>;
+	reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	hdmi {
+		hdmi_con_en: hdmi-con-en {
+			rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_reset: pcie-reset {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		usb_host_pwr_en: usb-host-pwr-en {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_otg0_pwr_en: usb-otg0-pwr-en {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbc0_int: usbc0-int {
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&rng {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	full-pwr-cycle-in-suspend;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sd;
+	no-sdio;
+	non-removable;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc_5v0_host>;
+	status = "okay";
+};
+
+&usb_drd1_dwc3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-luckfox-omni3576.dts b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-omni3576.dts
new file mode 100644
index 000000000000..6c75959adfe1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-omni3576.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2025 John Clark <inindev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "rk3576-luckfox-core3576.dtsi"
+
+/ {
+	model = "Luckfox Omni3576 Carrier Board";
+	compatible = "luckfox,omni3576", "luckfox,core3576", "rockchip,rk3576";
+
+	aliases {
+		mmc1 = &sdmmc;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_green_pin>;
+
+		green_led: green-led {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&pinctrl {
+	leds {
+		led_green_pin: led-green-pin {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	no-sdio;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
-- 
2.39.5

Re: [PATCH v5 1/3] dt-bindings: vendor-prefixes: Add luckfox prefix

[Quentin Schulz]

Hi John,

On 5/16/25 2:27 AM, John Clark wrote:
> Add vendor prefix for Shenzhen Luckfox Technology Co., Ltd., which
> produces development boards like the Luckfox Omni3576.
> 
> Signed-off-by: John Clark <inindev@gmail.com>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>

Thanks!
Quentin

Re: [PATCH v5 0/3] [PATCH v5 0/3] Add device tree support for Luckfox Omni3576 and Core3576

[Heiko Stuebner]

On Thu, 15 May 2025 20:27:10 -0400, John Clark wrote:
> This series adds device tree support for the Luckfox Omni3576 Carrier
> Board with the Core3576 Module, powered by the Rockchip RK3576 SoC
> (four Cortex-A72 cores, four Cortex-A53 cores, Mali-G52 MC3 GPU). It
> enables essential functionality for booting Linux and basic connectivity,
> with plans for future support of peripherals like WiFi, MIPI-DSI, HDMI,
> and Ethernet.
> 
> [...]

Applied, thanks!

[1/3] dt-bindings: vendor-prefixes: Add luckfox prefix
      commit: a6fed060c79971d528285e3e2fa5fbaf30abf30d
[2/3] dt-bindings: arm: rockchip: Add Luckfox Omni3576 and Core3576 bindings
      commit: cae568ff88fd8f25d51e120c2de30b094fd5ad02
[3/3] arm64: dts: rockchip: Add Luckfox Omni3576 Board support
      commit: f244d596ebb34b819a5414f8f7d37180ab833233

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>