[PATCH v5 01/13] media: dt-bindings: Add binding doc for i.MX8QXP and i.MX8QM ISI

[Frank Li <Frank.Li@nxp.com>]

Add binding documentation for i.MX8QXP and i.MX8QM ISI. The clock-names,
power-domains, and ports differ significantly from the existing
nxp,imx8-isi.yaml. Create a new file to avoid complex if-else branches.

Add new file to MAINTAINERS.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v4 to v5
- none

change from v3 to v4
- Add Rob's R-o-b
- change qxp clock/irq/power-domain to 6. (QXP C0 change 0, previous chip
have not production).
- fix register size to 0x80000 for qm, 0x60000 for qxp.
- fix qxp's irq number and clock

change from v2 to v3
- none
change from v1 to v2
- create new file for 8qm and 8qxp accroding rob's suggestion.
---
 .../devicetree/bindings/media/fsl,imx8qm-isi.yaml  | 117 +++++++++++++++++++++
 .../devicetree/bindings/media/fsl,imx8qxp-isi.yaml | 106 +++++++++++++++++++
 MAINTAINERS                                        |   1 +
 3 files changed, 224 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml b/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml
new file mode 100644
index 0000000000000..93f527e223aff
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx8qm-isi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8QM Image Sensing Interface
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Image Sensing Interface (ISI) combines image processing pipelines with
+  DMA engines to process and capture frames originating from a variety of
+  sources. The inputs to the ISI go through Pixel Link interfaces, and their
+  number and nature is SoC-dependent. They cover both capture interfaces (MIPI
+  CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-isi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 8
+
+  clock-names:
+    items:
+      - const: per0
+      - const: per1
+      - const: per2
+      - const: per3
+      - const: per4
+      - const: per5
+      - const: per6
+      - const: per7
+
+  interrupts:
+    maxItems: 8
+
+  power-domains:
+    maxItems: 8
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI CSI-2 RX 0
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI CSI-2 RX 1
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI RX
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx8-clock.h>
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    image-controller@58100000 {
+        compatible = "fsl,imx8qm-isi";
+        reg = <0x58100000 0x80000>;
+        interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma1_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma2_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma3_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma4_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma5_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma6_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma7_lpcg IMX_LPCG_CLK_0>;
+        clock-names = "per0", "per1", "per2", "per3",
+                      "per4", "per5", "per6", "per7";
+        power-domains = <&pd IMX_SC_R_ISI_CH0>, <&pd IMX_SC_R_ISI_CH1>,
+                        <&pd IMX_SC_R_ISI_CH2>, <&pd IMX_SC_R_ISI_CH3>,
+                        <&pd IMX_SC_R_ISI_CH4>, <&pd IMX_SC_R_ISI_CH5>,
+                        <&pd IMX_SC_R_ISI_CH6>, <&pd IMX_SC_R_ISI_CH7>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@2 {
+                reg = <2>;
+                endpoint {
+                    remote-endpoint = <&mipi_csi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml b/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml
new file mode 100644
index 0000000000000..bb41996bd2e36
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx8qxp-isi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8QXP Image Sensing Interface
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Image Sensing Interface (ISI) combines image processing pipelines with
+  DMA engines to process and capture frames originating from a variety of
+  sources. The inputs to the ISI go through Pixel Link interfaces, and their
+  number and nature is SoC-dependent. They cover both capture interfaces (MIPI
+  CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qxp-isi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: per0
+      - const: per1
+      - const: per2
+      - const: per3
+      - const: per4
+      - const: per5
+
+  interrupts:
+    maxItems: 6
+
+  power-domains:
+    maxItems: 6
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI CSI-2 RX 0
+      port@6:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: CSI-2 Parallel RX
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx8-clock.h>
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    image-controller@58100000 {
+        compatible = "fsl,imx8qxp-isi";
+        reg = <0x58100000 0x60000>;
+        interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma1_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma2_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma3_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma4_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma5_lpcg IMX_LPCG_CLK_0>;
+        clock-names = "per0", "per1", "per2", "per3", "per4", "per5";
+        power-domains = <&pd IMX_SC_R_ISI_CH0>, <&pd IMX_SC_R_ISI_CH1>,
+                        <&pd IMX_SC_R_ISI_CH2>, <&pd IMX_SC_R_ISI_CH3>,
+                        <&pd IMX_SC_R_ISI_CH4>, <&pd IMX_SC_R_ISI_CH5>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@2 {
+                reg = <2>;
+                endpoint {
+                    remote-endpoint = <&mipi_csi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 0cb9e55021cb8..c4e0b88f58309 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17853,6 +17853,7 @@ NXP i.MX 8M ISI DRIVER
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/media/fsl,imx8*-isi.yaml
 F:	Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml
 F:	drivers/media/platform/nxp/imx8-isi/
 

-- 
2.34.1