[PATCH v2 1/4] dt-bindings: mfd: convert mxs-lradc bindings to json-schema

[Dario Binacchi <dario.binacchi@amarulasolutions.com>]

Convert the Freescale MXS Low-Resoulution ADC (LRADC) device tree
binding documentation to json-schema.

The clocks and #io-channel-cells properties have also been added; They
are present in the respective SoC DTSI files but were missing from the
old mxs-lradc.txt file.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---

(no changes since v1)

 .../devicetree/bindings/mfd/mxs-lradc.txt     |  45 --------
 .../devicetree/bindings/mfd/mxs-lradc.yaml    | 106 ++++++++++++++++++
 2 files changed, 106 insertions(+), 45 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/mxs-lradc.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/mxs-lradc.yaml

diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt
deleted file mode 100644
index 755cbef0647d..000000000000
--- a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* Freescale MXS LRADC device driver
-
-Required properties:
-- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc"
-              for i.MX28 SoC
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the LRADC interrupts
-
-Optional properties:
-- fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen
-                               to LRADC. Valid value is either 4 or 5. If this
-                               property is not present, then the touchscreen is
-                               disabled. 5 wires is valid for i.MX28 SoC only.
-- fsl,ave-ctrl: number of samples per direction to calculate an average value.
-                Allowed value is 1 ... 32, default is 4
-- fsl,ave-delay: delay between consecutive samples. Allowed value is
-                 2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at
-                 2 kHz and its default is 2 (= 1 ms)
-- fsl,settling: delay between plate switch to next sample. Allowed value is
-                1 ... 2047. It counts at 2 kHz and its default is
-                10 (= 5 ms)
-
-Example for i.MX23 SoC:
-
-	lradc@80050000 {
-		compatible = "fsl,imx23-lradc";
-		reg = <0x80050000 0x2000>;
-		interrupts = <36 37 38 39 40 41 42 43 44>;
-		fsl,lradc-touchscreen-wires = <4>;
-		fsl,ave-ctrl = <4>;
-		fsl,ave-delay = <2>;
-		fsl,settling = <10>;
-	};
-
-Example for i.MX28 SoC:
-
-	lradc@80050000 {
-		compatible = "fsl,imx28-lradc";
-		reg = <0x80050000 0x2000>;
-		interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>;
-		fsl,lradc-touchscreen-wires = <5>;
-		fsl,ave-ctrl = <4>;
-		fsl,ave-delay = <2>;
-		fsl,settling = <10>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.yaml b/Documentation/devicetree/bindings/mfd/mxs-lradc.yaml
new file mode 100644
index 000000000000..90391b02c715
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mxs-lradc.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mxs-lradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS Low-Resoulution ADC (LRADC)
+
+maintainers:
+  - Dario Binacchi <dario.binacchi@amarulasolutions.com>
+
+description: |
+  The LRADC provides 16 physical channels of 12-bit resolution
+  for analog-to-digital conversion and includes an integrated
+  4-wire/5-wire touchscreen controller.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx23-lradc
+          - fsl,imx28-lradc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  interrupts:
+    minItems: 9
+    maxItems: 13
+
+  fsl,lradc-touchscreen-wires:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Number of wires used to connect the touchscreen to LRADC.
+      If this property is not present, then the touchscreen is disabled.
+
+  fsl,ave-ctrl:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    default: 4
+    description: |
+      Number of samples per direction to calculate an average value.
+
+  fsl,ave-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2
+    maximum: 2048
+    default: 2
+    description: |
+      Delay between consecutive samples.
+      It is used if 'fsl,ave-ctrl' > 1, counts at 2 kHz and its
+      default value (i. e. 2) is 1 ms.
+
+  fsl,settling:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 2047
+    default: 10
+    description: |
+      Delay between plate switch to next sample.
+      It counts at 2 kHz and its default (i. e. 10) is 5 ms.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,imx23-lradc
+then:
+  properties:
+    fsl,lradc-touchscreen-wires:
+      const: 4
+else:
+  properties:
+    fsl,lradc-touchscreen-wires:
+      enum: [4, 5]
+
+additionalProperties: false
+
+examples:
+  - |
+    lradc@80050000 {
+        compatible = "fsl,imx23-lradc";
+        reg = <0x80050000 0x2000>;
+        interrupts = <36>, <37>, <38>, <39>, <40>,
+                     <41>, <42>, <43>, <44>;
+        clocks = <&clks 26>;
+        #io-channel-cells = <1>;
+        fsl,lradc-touchscreen-wires = <4>;
+        fsl,ave-ctrl = <4>;
+        fsl,ave-delay = <2>;
+        fsl,settling = <10>;
+    };
-- 
2.43.0