[PATCH v4 6/6] ARM: mxs_defconfig: select new drivers used by imx28-amarula-rmm

[Dario Binacchi <dario.binacchi@amarulasolutions.com>]

Select the options required by the imx28-amarula-rmm board.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

Changes in v4:
- In mxs-lradc.txt:
  - Fix typo Low-Resoulution -> Low-Resolution'
  - Wrap lines at 80 char.
  - Drop '|' from the description
  - Describe what each interrupt is for.
  - Move touchscreen-wires constraint for imx28 to the top level
- In imx28-amarula-rmm.dts:
  - Drop label property (deprecated) under the leds sub-nodes.
  - Add microSD comment above the ssp0 node.
- Add patch 5/6 "ARM: mxs_defconfig: Cleanup mxs_defconfig"
- Add patch 6/6 "ARM: mxs_defconfig: select new drivers used by
  imx28-amarula-rmm"

Changes in v3:
- In imx28-amarula-rmm.dts:
  - Drop xceiver-supply property from can0 node.
  - Rearrange the order of specific nodes and properties
    alphabetically.

Changes in v2:
- In imx28-amarula-rmm.dts:
  - Replace '-' with '@' for the pinctrl sub-nodes.
  - Replace edt,edt-ft5x06 with edt,edt-ft5306.
  - Drop LCD reset hog pin.
  - Add correct #address-cells and #size-cells to gpmi node.
  - Replace edt-ft5x06@38 with touchscreen@38.
- Drop from commit messages all references to LCD display.
- Add patch [1/4] "dt-bindings: mfd: convert mxs-lradc bindings to
  json-schema".

 arch/arm/configs/mxs_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 91723fdd3c04..3b08c63b6de4 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -64,8 +64,11 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
 CONFIG_TOUCHSCREEN_MXS_LRADC=y
 CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PWM_BEEPER=y
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
-- 
2.43.0