Re: [PATCH v2 4/6] arm64: dts: imx943-evk: add sound-wm8962 support

[Marco Felsch <m.felsch@pengutronix.de>]

On 25-05-30, Shengjiu Wang wrote:
> On Wed, May 28, 2025 at 4:37 PM Marco Felsch <m.felsch@pengutronix.de> wrote:
> >
> > Hi,
> >
> > On 25-05-28, Shengjiu Wang wrote:
> > > Add WM8962 codec connected to SAI1 interface.
> > >
> > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> > > Reviewed-by: Frank Li <Frank.Li@nxp.com>
> > > ---
> > >  arch/arm64/boot/dts/freescale/imx943-evk.dts | 79 ++++++++++++++++++++
> > >  1 file changed, 79 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts
> > > index ff6e9ac5477f..da08aaa95904 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx943-evk.dts
> > > +++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts
> > > @@ -36,6 +36,15 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
> > >               enable-active-high;
> > >       };
> > >
> > > +     reg_audio_pwr: regulator-wm8962-pwr {
> > > +             compatible = "regulator-fixed";
> > > +             regulator-max-microvolt = <3300000>;
> > > +             regulator-min-microvolt = <3300000>;
> > > +             regulator-name = "audio-pwr";
> > > +             gpio = <&pcal6416_i2c3_u171 12 GPIO_ACTIVE_HIGH>;
> > > +             enable-active-high;
> > > +     };
> > > +
> > >       reserved-memory {
> > >               ranges;
> > >               #address-cells = <2>;
> > > @@ -50,6 +59,21 @@ linux,cma {
> > >               };
> > >       };
> > >
> > > +     sound-wm8962 {
> > > +             compatible = "fsl,imx-audio-wm8962";
> >
> > Out of curiosity did you considered making use of "audio-graph-card2"?
> >
> > The "fsl,imx-audio-wm8962" seems like a pretty simple sound card which
> > could be added via the "audio-graph-card2" as well. Don't get me wrong,
> > it's not wrong what you're doing here but making use of the generic
> > sound card would be nice because it's very common to just copy'n'paste
> > the audio integration from the corresponding evk.dts file.
> 
> Thanks for the suggestion.
> 
> WM8962 has a function .set_pll(), which hasn't been supported in
> audio-graph-card2.  so we still use fsl,imx-audio-wm8962.

Thanks for the explanation.

Regards,
  Marco