From: Jammy Huang <jammy_huang@aspeedtech.com>
To: <jassisinghbrar@gmail.com>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>, <joel@jms.id.au>,
<andrew@codeconstruct.com.au>, <jammy_huang@aspeedtech.com>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v1 2/2] mailbox: aspeed: add mailbox driver for AST27XX series SoC
Date: Tue, 3 Jun 2025 15:54:50 +0800 [thread overview]
Message-ID: <20250603075450.133604-3-jammy_huang@aspeedtech.com> (raw)
In-Reply-To: <20250603075450.133604-1-jammy_huang@aspeedtech.com>
Add mailbox controller driver for AST27XX SoCs, which provides
independent tx/rx mailbox between different processors. There are 4
channels for each tx/rx mailbox and each channel has an 32-byte FIFO.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
drivers/mailbox/Kconfig | 8 ++
drivers/mailbox/Makefile | 2 +
drivers/mailbox/ast2700-mailbox.c | 226 ++++++++++++++++++++++++++++++
3 files changed, 236 insertions(+)
create mode 100644 drivers/mailbox/ast2700-mailbox.c
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index 68eeed660a4a..1c38cd570091 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -340,4 +340,12 @@ config THEAD_TH1520_MBOX
kernel is running, and E902 core used for power management among other
things.
+config AST2700_MBOX
+ tristate "ASPEED AST2700 IPC driver"
+ depends on ARCH_ASPEED || COMPILE_TEST
+ help
+ Mailbox driver implementation for ASPEED AST27XX SoCs. This driver
+ can be used to send message between different processors in SoC.
+ The driver provides mailbox support for sending interrupts to the
+ clients. Say Y here if you want to build this driver.
endif
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 13a3448b3271..9a9add9a7548 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -72,3 +72,5 @@ obj-$(CONFIG_QCOM_CPUCP_MBOX) += qcom-cpucp-mbox.o
obj-$(CONFIG_QCOM_IPCC) += qcom-ipcc.o
obj-$(CONFIG_THEAD_TH1520_MBOX) += mailbox-th1520.o
+
+obj-$(CONFIG_AST2700_MBOX) += ast2700-mailbox.o
diff --git a/drivers/mailbox/ast2700-mailbox.c b/drivers/mailbox/ast2700-mailbox.c
new file mode 100644
index 000000000000..0ee10bd3a6e1
--- /dev/null
+++ b/drivers/mailbox/ast2700-mailbox.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Aspeed Technology Inc. (C) 2025. All rights reserved
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_controller.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* Each bit in the register represents an IPC ID */
+#define IPCR_TX_TRIG 0x00
+#define IPCR_TX_ENABLE 0x04
+#define IPCR_RX_ENABLE 0x104
+#define IPCR_TX_STATUS 0x08
+#define IPCR_RX_STATUS 0x108
+#define RX_IRQ(n) BIT(0 + 1 * (n))
+#define RX_IRQ_MASK 0xf
+#define IPCR_TX_DATA 0x10
+#define IPCR_RX_DATA 0x110
+
+struct ast2700_mbox_data {
+ u8 num_chans;
+ u8 msg_size;
+};
+
+struct ast2700_mbox {
+ struct mbox_controller mbox;
+ const struct ast2700_mbox_data *drv_data;
+ void __iomem *regs;
+ u32 *rx_buff;
+};
+
+static inline int ch_num(struct mbox_chan *chan)
+{
+ return chan - chan->mbox->chans;
+}
+
+static inline int ast2700_mbox_tx_done(struct ast2700_mbox *mb, int idx)
+{
+ return !(readl(mb->regs + IPCR_TX_STATUS) & BIT(idx));
+}
+
+static irqreturn_t ast2700_mbox_irq(int irq, void *p)
+{
+ struct ast2700_mbox *mb = p;
+ void __iomem *data_reg;
+ int num_words;
+ u32 *word_data;
+ u32 status;
+ int n;
+
+ /* Only examine channels that are currently enabled. */
+ status = readl(mb->regs + IPCR_RX_ENABLE) &
+ readl(mb->regs + IPCR_RX_STATUS);
+
+ if (!(status & RX_IRQ_MASK))
+ return IRQ_NONE;
+
+ for (n = 0; n < mb->mbox.num_chans; ++n) {
+ struct mbox_chan *chan = &mb->mbox.chans[n];
+
+ if (!(status & RX_IRQ(n)))
+ continue;
+
+ for (data_reg = mb->regs + IPCR_RX_DATA + mb->drv_data->msg_size * n,
+ word_data = chan->con_priv,
+ num_words = (mb->drv_data->msg_size / sizeof(u32));
+ num_words; num_words--, data_reg += sizeof(u32), word_data++)
+ *word_data = readl(data_reg);
+
+ mbox_chan_received_data(chan, chan->con_priv);
+
+ /* The IRQ can be cleared only once the FIFO is empty. */
+ writel(RX_IRQ(n), mb->regs + IPCR_RX_STATUS);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int ast2700_mbox_send_data(struct mbox_chan *chan, void *data)
+{
+ struct ast2700_mbox *mb = dev_get_drvdata(chan->mbox->dev);
+ void __iomem *data_reg;
+ u32 *word_data;
+ int num_words;
+ int idx = ch_num(chan);
+
+ if (!(readl(mb->regs + IPCR_TX_ENABLE) & BIT(idx))) {
+ dev_warn(mb->mbox.dev, "%s: Ch-%d not enabled yet\n", __func__, idx);
+ return -EBUSY;
+ }
+
+ if (!(ast2700_mbox_tx_done(mb, idx))) {
+ dev_warn(mb->mbox.dev, "%s: Ch-%d last data has not finished\n", __func__, idx);
+ return -EBUSY;
+ }
+
+ for (data_reg = mb->regs + IPCR_TX_DATA + mb->drv_data->msg_size * idx,
+ num_words = (mb->drv_data->msg_size / sizeof(u32)),
+ word_data = (u32 *)data;
+ num_words; num_words--, data_reg += sizeof(u32), word_data++)
+ writel(*word_data, data_reg);
+
+ writel(BIT(idx), mb->regs + IPCR_TX_TRIG);
+ dev_dbg(mb->mbox.dev, "%s: Ch-%d sent\n", __func__, idx);
+
+ return 0;
+}
+
+static int ast2700_mbox_startup(struct mbox_chan *chan)
+{
+ struct ast2700_mbox *mb = dev_get_drvdata(chan->mbox->dev);
+ int idx = ch_num(chan);
+ void __iomem *reg = mb->regs + IPCR_RX_ENABLE;
+
+ writel_relaxed(readl_relaxed(reg) | BIT(idx), reg);
+
+ return 0;
+}
+
+static void ast2700_mbox_shutdown(struct mbox_chan *chan)
+{
+ struct ast2700_mbox *mb = dev_get_drvdata(chan->mbox->dev);
+ int idx = ch_num(chan);
+ void __iomem *reg = mb->regs + IPCR_RX_ENABLE;
+
+ writel_relaxed(readl_relaxed(reg) & ~BIT(idx), reg);
+}
+
+static bool ast2700_mbox_last_tx_done(struct mbox_chan *chan)
+{
+ struct ast2700_mbox *mb = dev_get_drvdata(chan->mbox->dev);
+ int idx = ch_num(chan);
+
+ return ast2700_mbox_tx_done(mb, idx) ? true : false;
+}
+
+static const struct mbox_chan_ops ast2700_mbox_chan_ops = {
+ .send_data = ast2700_mbox_send_data,
+ .startup = ast2700_mbox_startup,
+ .shutdown = ast2700_mbox_shutdown,
+ .last_tx_done = ast2700_mbox_last_tx_done,
+};
+
+static int ast2700_mbox_probe(struct platform_device *pdev)
+{
+ struct ast2700_mbox *mb;
+ const struct ast2700_mbox_data *drv_data;
+ struct device *dev = &pdev->dev;
+ int irq, ret;
+
+ if (!pdev->dev.of_node)
+ return -ENODEV;
+
+ drv_data = (const struct ast2700_mbox_data *)device_get_match_data(&pdev->dev);
+
+ mb = devm_kzalloc(dev, sizeof(*mb), GFP_KERNEL);
+ if (!mb)
+ return -ENOMEM;
+
+ mb->mbox.chans = devm_kcalloc(&pdev->dev, drv_data->num_chans,
+ sizeof(*mb->mbox.chans), GFP_KERNEL);
+ if (!mb->mbox.chans)
+ return -ENOMEM;
+
+ for (int i = 0; i < drv_data->num_chans; i++) {
+ mb->mbox.chans[i].con_priv = devm_kcalloc(dev, drv_data->msg_size,
+ sizeof(u8), GFP_KERNEL);
+ if (!mb->mbox.chans[i].con_priv)
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, mb);
+
+ mb->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(mb->regs))
+ return PTR_ERR(mb->regs);
+
+ mb->drv_data = drv_data;
+ mb->mbox.dev = dev;
+ mb->mbox.num_chans = drv_data->num_chans;
+ mb->mbox.ops = &ast2700_mbox_chan_ops;
+ mb->mbox.txdone_irq = false;
+ mb->mbox.txdone_poll = true;
+ mb->mbox.txpoll_period = 5;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ ret = devm_request_irq(dev, irq, ast2700_mbox_irq, 0, dev_name(dev), mb);
+ if (ret)
+ return ret;
+
+ return devm_mbox_controller_register(dev, &mb->mbox);
+}
+
+static const struct ast2700_mbox_data ast2700_drv_data = {
+ .num_chans = 4,
+ .msg_size = 0x20,
+};
+
+static const struct of_device_id ast2700_mbox_of_match[] = {
+ { .compatible = "aspeed,ast2700-mailbox", .data = &ast2700_drv_data },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ast2700_mbox_of_match);
+
+static struct platform_driver ast2700_mbox_driver = {
+ .driver = {
+ .name = "ast2700-mailbox",
+ .of_match_table = ast2700_mbox_of_match,
+ },
+ .probe = ast2700_mbox_probe,
+};
+module_platform_driver(ast2700_mbox_driver);
+
+MODULE_AUTHOR("Jammy Huang <jammy_huang@aspeedtech.com>");
+MODULE_DESCRIPTION("ASPEED AST2700 IPC driver");
+MODULE_LICENSE("GPL");
--
2.25.1
prev parent reply other threads:[~2025-06-03 8:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-03 7:54 [PATCH v1 0/2] ASPEED: Add mailbox driver for AST2700 series Jammy Huang
2025-06-03 7:54 ` [PATCH v1 1/2] dt-bindings: mailbox: Add ASPEED AST2700 series SoC Jammy Huang
2025-06-03 9:22 ` Krzysztof Kozlowski
2025-06-03 9:52 ` Krzysztof Kozlowski
2025-06-04 0:46 ` Jammy Huang
2025-06-03 9:42 ` Rob Herring (Arm)
2025-06-04 0:45 ` Jammy Huang
2025-06-03 7:54 ` Jammy Huang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250603075450.133604-3-jammy_huang@aspeedtech.com \
--to=jammy_huang@aspeedtech.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jassisinghbrar@gmail.com \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox