linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Christian Marangi <ansuelsmth@gmail.com>
To: Christian Marangi <ansuelsmth@gmail.com>,
	Vinod Koul <vkoul@kernel.org>,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Lorenzo Bianconi <lorenzo@kernel.org>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/4] phy: move Airoha PCIe PHY driver to dedicated directory
Date: Fri,  6 Jun 2025 21:22:02 +0200	[thread overview]
Message-ID: <20250606192208.26465-2-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20250606192208.26465-1-ansuelsmth@gmail.com>

In preparation for additional PHY driver for different Airoha SoC,
move the current PCIe PHY driver in a dedicated directory.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 MAINTAINERS                                     |  4 ++--
 drivers/phy/Kconfig                             | 11 +----------
 drivers/phy/Makefile                            |  4 ++--
 drivers/phy/airoha/Kconfig                      | 13 +++++++++++++
 drivers/phy/airoha/Makefile                     |  2 ++
 drivers/phy/{ => airoha}/phy-airoha-pcie-regs.h |  0
 drivers/phy/{ => airoha}/phy-airoha-pcie.c      |  0
 7 files changed, 20 insertions(+), 14 deletions(-)
 create mode 100644 drivers/phy/airoha/Kconfig
 create mode 100644 drivers/phy/airoha/Makefile
 rename drivers/phy/{ => airoha}/phy-airoha-pcie-regs.h (100%)
 rename drivers/phy/{ => airoha}/phy-airoha-pcie.c (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 6dbdf02d6b0c..2f30432916a3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -735,8 +735,8 @@ M:	Lorenzo Bianconi <lorenzo@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/phy/airoha,en7581-pcie-phy.yaml
-F:	drivers/phy/phy-airoha-pcie-regs.h
-F:	drivers/phy/phy-airoha-pcie.c
+F:	drivers/phy/airoha/phy-airoha-pcie-regs.h
+F:	drivers/phy/airoha/phy-airoha-pcie.c
 
 AIROHA SPI SNFI DRIVER
 M:	Lorenzo Bianconi <lorenzo@kernel.org>
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 8d58efe998ec..7f9f5b786643 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -72,16 +72,6 @@ config PHY_CAN_TRANSCEIVER
 	  functional modes using gpios and sets the attribute max link
 	  rate, for CAN drivers.
 
-config PHY_AIROHA_PCIE
-	tristate "Airoha PCIe-PHY Driver"
-	depends on ARCH_AIROHA || COMPILE_TEST
-	depends on OF
-	select GENERIC_PHY
-	help
-	  Say Y here to add support for Airoha PCIe PHY driver.
-	  This driver create the basic PHY instance and provides initialize
-	  callback for PCIe GEN3 port.
-
 config PHY_NXP_PTN3222
 	tristate "NXP PTN3222 1-port eUSB2 to USB2 redriver"
 	depends on I2C
@@ -93,6 +83,7 @@ config PHY_NXP_PTN3222
 	  schemes. It supports all three USB 2.0 data rates: Low Speed, Full
 	  Speed and High Speed.
 
+source "drivers/phy/airoha/Kconfig"
 source "drivers/phy/allwinner/Kconfig"
 source "drivers/phy/amlogic/Kconfig"
 source "drivers/phy/broadcom/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index e281442acc75..0ad0e5309493 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -10,9 +10,9 @@ obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
 obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
 obj-$(CONFIG_USB_LGM_PHY)		+= phy-lgm-usb.o
-obj-$(CONFIG_PHY_AIROHA_PCIE)		+= phy-airoha-pcie.o
 obj-$(CONFIG_PHY_NXP_PTN3222)		+= phy-nxp-ptn3222.o
-obj-y					+= allwinner/	\
+obj-y					+= airoha/	\
+					   allwinner/	\
 					   amlogic/	\
 					   broadcom/	\
 					   cadence/	\
diff --git a/drivers/phy/airoha/Kconfig b/drivers/phy/airoha/Kconfig
new file mode 100644
index 000000000000..1674134ea664
--- /dev/null
+++ b/drivers/phy/airoha/Kconfig
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Airoha platforms
+#
+config PHY_AIROHA_PCIE
+	tristate "Airoha PCIe-PHY Driver"
+	depends on ARCH_AIROHA || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Say Y here to add support for Airoha PCIe PHY driver.
+	  This driver create the basic PHY instance and provides initialize
+	  callback for PCIe GEN3 port.
diff --git a/drivers/phy/airoha/Makefile b/drivers/phy/airoha/Makefile
new file mode 100644
index 000000000000..616dc96302af
--- /dev/null
+++ b/drivers/phy/airoha/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_PHY_AIROHA_PCIE)		+= phy-airoha-pcie.o
diff --git a/drivers/phy/phy-airoha-pcie-regs.h b/drivers/phy/airoha/phy-airoha-pcie-regs.h
similarity index 100%
rename from drivers/phy/phy-airoha-pcie-regs.h
rename to drivers/phy/airoha/phy-airoha-pcie-regs.h
diff --git a/drivers/phy/phy-airoha-pcie.c b/drivers/phy/airoha/phy-airoha-pcie.c
similarity index 100%
rename from drivers/phy/phy-airoha-pcie.c
rename to drivers/phy/airoha/phy-airoha-pcie.c
-- 
2.48.1



  reply	other threads:[~2025-06-06 19:27 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-06 19:22 [PATCH 0/4] phy: airoha: add support for AN7583 PCIe PHY driver Christian Marangi
2025-06-06 19:22 ` Christian Marangi [this message]
2025-06-06 19:22 ` [PATCH 2/4] phy: airoha: add EN7581 tag to " Christian Marangi
2025-06-06 19:22 ` [PATCH 3/4] dt-bindings: phy: airoha: Document support for AN7583 PCIe PHY Christian Marangi
2025-06-09 16:51   ` Conor Dooley
2025-06-17 13:57     ` Christian Marangi
2025-06-17 16:29       ` Conor Dooley
2025-06-06 19:22 ` [PATCH 4/4] phy: airoha: add support for AN7583 PCIe PHY driver Christian Marangi
2025-06-10  7:50   ` neil.armstrong
2025-06-17 13:59     ` Christian Marangi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250606192208.26465-2-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=lorenzo@kernel.org \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).