From: Frank Li <Frank.Li@nxp.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Richard Cochran <richardcochran@gmail.com>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
imx@lists.linux.dev (open list:ARM/FREESCALE IMX / MXC ARM
ARCHITECTURE),
linux-arm-kernel@lists.infradead.org (moderated
list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE),
linux-kernel@vger.kernel.org (open list),
netdev@vger.kernel.org (open list:PTP HARDWARE CLOCK
SUPPORT:Keyword:(?:\b|_)ptp(?:\b|_))
Cc: imx@lists.linux.dev
Subject: [PATCH v2 2/6] arm64: dts: imx93: remove eee-broken-1000t for eqos node
Date: Mon, 9 Jun 2025 12:52:33 -0400 [thread overview]
Message-ID: <20250609165237.1617560-2-Frank.Li@nxp.com> (raw)
In-Reply-To: <20250609165237.1617560-1-Frank.Li@nxp.com>
From: Clark Wang <xiaoning.wang@nxp.com>
The "eee-broken-1000t" was added on 8mm for FEC to avoid issue of ptp sync.
EQoS haven't such issue. So, remove this for EQoS phys.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change in v2
- add peng fan review tag
- add missed s-o-b
---
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts | 1 -
arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 8491eb53120e6..a6ebeb642eb65 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -217,7 +217,6 @@ mdio {
ethphy1: ethernet-phy@1 {
reg = <1>;
- eee-broken-1000t;
reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <80000>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
index acbd981ba548a..cceca130c5b4e 100644
--- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
@@ -184,7 +184,6 @@ mdio {
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
- eee-broken-1000t;
reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <80000>;
--
2.34.1
next prev parent reply other threads:[~2025-06-09 18:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-09 16:52 [PATCH v2 1/6] arm64: dts: imx93-9x9-qsb: add IMU sensor support Frank Li
2025-06-09 16:52 ` Frank Li [this message]
2025-06-09 16:52 ` [PATCH v2 3/6] arm64: dts: imx93-qsb/evk: add usdhc3 and lpuart5 Frank Li
2025-06-09 16:52 ` [PATCH v2 4/6] arm64: dts: imx93-11x11-evk: disable all realtek ethernet phy CLKOUT Frank Li
2025-06-09 16:52 ` [PATCH v2 5/6] arm64: dts: imx93-11x11-evk: reduce the driving strength of net RXC/TXC Frank Li
2025-06-09 16:52 ` [PATCH v2 6/6] arm64: dts: imx93-11x11-evk: remove the duplicated pinctrl_lpi2c3 node Frank Li
2025-07-01 14:17 ` [PATCH v2 1/6] arm64: dts: imx93-9x9-qsb: add IMU sensor support Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250609165237.1617560-2-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox