linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 0/3] bus: ts-nbus: use gpiod_multi_set_value_cansleep
@ 2025-06-11 20:18 David Lechner
  2025-06-11 20:18 ` [PATCH v4 1/3] bus: ts-nbus: validate ts,data-gpios array size David Lechner
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: David Lechner @ 2025-06-11 20:18 UTC (permalink / raw)
  To: Sebastien Bourdelin, Arnd Bergmann, linux-arm-kernel
  Cc: Linus Walleij, Bartosz Golaszewski, linux-gpio, linux-kernel,
	David Lechner, Andy Shevchenko

This is what remains from "gpiolib: add gpiod_multi_set_value_cansleep"
that didn't get applied yet for the bus subsystem. So I have changed
the subject line accordingly.

Arnd,

There was no maintainer listed in MAINTAINERS for the ts-nbus driver
and it looks like you have picked up patches for it in the past. Could
you please pick up these as well?

---
Changes in v4:
- Dropped all non-ts-nbus patches.
- Fixed a reported issue with uninitialized variables.
- Link to v3: https://lore.kernel.org/r/20250210-gpio-set-array-helper-v3-0-d6a673674da8@baylibre.com

Changes in v3:
- Added IS_ERR_OR_NULL() check to gpiod_multi_set_value_cansleep()
- Added new patches to clean up accessing bitmap directly (ts-nbus, ad2s1210).
- Added function prefix for max3191x.
- Removed unnecessary braces in ad7606 patch.
- Picked up additional trailers.
- Link to v2: https://lore.kernel.org/r/20250206-gpio-set-array-helper-v2-0-1c5f048f79c3@baylibre.com

Changes in v2:
- Renamed new function from gpiods_multi_set_value_cansleep() to
  gpiod_multi_set_value_cansleep()
- Fixed typo in name of replaced function in all commit messages.
- Picked up trailers.
- Link to v1: https://lore.kernel.org/r/20250131-gpio-set-array-helper-v1-0-991c8ccb4d6e@baylibre.com

---
David Lechner (3):
      bus: ts-nbus: validate ts,data-gpios array size
      bus: ts-nbus: use gpiod_multi_set_value_cansleep
      bus: ts-nbus: use bitmap_set_value8()

 drivers/bus/ts-nbus.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)
---
base-commit: 19a60293b9925080d97f22f122aca3fc46dadaf9
change-id: 20250131-gpio-set-array-helper-bd4a328370d3

Best regards,
-- 
David Lechner <dlechner@baylibre.com>



^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v4 1/3] bus: ts-nbus: validate ts,data-gpios array size
  2025-06-11 20:18 [PATCH v4 0/3] bus: ts-nbus: use gpiod_multi_set_value_cansleep David Lechner
@ 2025-06-11 20:18 ` David Lechner
  2025-06-11 20:18 ` [PATCH v4 2/3] bus: ts-nbus: use gpiod_multi_set_value_cansleep David Lechner
  2025-06-11 20:18 ` [PATCH v4 3/3] bus: ts-nbus: use bitmap_set_value8() David Lechner
  2 siblings, 0 replies; 5+ messages in thread
From: David Lechner @ 2025-06-11 20:18 UTC (permalink / raw)
  To: Sebastien Bourdelin, Arnd Bergmann, linux-arm-kernel
  Cc: Linus Walleij, Bartosz Golaszewski, linux-gpio, linux-kernel,
	David Lechner

Add validation of ts,data-gpios array size during probe. The driver
later hard-codes 8 as the size of the array when using it, so we should
be validating that the array is actually that big to prevent possible
out of bounds accesses.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
---
 drivers/bus/ts-nbus.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/bus/ts-nbus.c b/drivers/bus/ts-nbus.c
index 2328c48b9b1260e805c631f2aa7379d620084537..d3ee102a13893c83c50e41f7298821f4d7ae3487 100644
--- a/drivers/bus/ts-nbus.c
+++ b/drivers/bus/ts-nbus.c
@@ -48,6 +48,10 @@ static int ts_nbus_init_pdata(struct platform_device *pdev,
 		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->data),
 				     "failed to retrieve ts,data-gpio from dts\n");
 
+	if (ts_nbus->data->ndescs != 8)
+		return dev_err_probe(&pdev->dev, -EINVAL,
+				     "invalid number of ts,data-gpios\n");
+
 	ts_nbus->csn = devm_gpiod_get(&pdev->dev, "ts,csn", GPIOD_OUT_HIGH);
 	if (IS_ERR(ts_nbus->csn))
 		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->csn),

-- 
2.43.0



^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v4 2/3] bus: ts-nbus: use gpiod_multi_set_value_cansleep
  2025-06-11 20:18 [PATCH v4 0/3] bus: ts-nbus: use gpiod_multi_set_value_cansleep David Lechner
  2025-06-11 20:18 ` [PATCH v4 1/3] bus: ts-nbus: validate ts,data-gpios array size David Lechner
@ 2025-06-11 20:18 ` David Lechner
  2025-06-11 20:18 ` [PATCH v4 3/3] bus: ts-nbus: use bitmap_set_value8() David Lechner
  2 siblings, 0 replies; 5+ messages in thread
From: David Lechner @ 2025-06-11 20:18 UTC (permalink / raw)
  To: Sebastien Bourdelin, Arnd Bergmann, linux-arm-kernel
  Cc: Linus Walleij, Bartosz Golaszewski, linux-gpio, linux-kernel,
	David Lechner

Reduce verbosity by using gpiod_multi_set_value_cansleep() instead of
gpiod_set_array_value_cansleep().

ts_nbus->data->ndescs is validated to be 8 during probe, so will have
the same value as the hard-coded 8 that is removed by this change.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
---
 drivers/bus/ts-nbus.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/bus/ts-nbus.c b/drivers/bus/ts-nbus.c
index d3ee102a13893c83c50e41f7298821f4d7ae3487..b4c9308caf0647a3261071d9527fffce77784af2 100644
--- a/drivers/bus/ts-nbus.c
+++ b/drivers/bus/ts-nbus.c
@@ -109,8 +109,7 @@ static void ts_nbus_reset_bus(struct ts_nbus *ts_nbus)
 
 	values[0] = 0;
 
-	gpiod_set_array_value_cansleep(8, ts_nbus->data->desc,
-				       ts_nbus->data->info, values);
+	gpiod_multi_set_value_cansleep(ts_nbus->data, values);
 	gpiod_set_value_cansleep(ts_nbus->csn, 0);
 	gpiod_set_value_cansleep(ts_nbus->strobe, 0);
 	gpiod_set_value_cansleep(ts_nbus->ale, 0);
@@ -150,12 +149,11 @@ static int ts_nbus_read_byte(struct ts_nbus *ts_nbus, u8 *val)
  */
 static void ts_nbus_write_byte(struct ts_nbus *ts_nbus, u8 byte)
 {
-	struct gpio_descs *gpios = ts_nbus->data;
 	DECLARE_BITMAP(values, 8);
 
 	values[0] = byte;
 
-	gpiod_set_array_value_cansleep(8, gpios->desc, gpios->info, values);
+	gpiod_multi_set_value_cansleep(ts_nbus->data, values);
 }
 
 /*

-- 
2.43.0



^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v4 3/3] bus: ts-nbus: use bitmap_set_value8()
  2025-06-11 20:18 [PATCH v4 0/3] bus: ts-nbus: use gpiod_multi_set_value_cansleep David Lechner
  2025-06-11 20:18 ` [PATCH v4 1/3] bus: ts-nbus: validate ts,data-gpios array size David Lechner
  2025-06-11 20:18 ` [PATCH v4 2/3] bus: ts-nbus: use gpiod_multi_set_value_cansleep David Lechner
@ 2025-06-11 20:18 ` David Lechner
  2025-06-11 20:26   ` David Lechner
  2 siblings, 1 reply; 5+ messages in thread
From: David Lechner @ 2025-06-11 20:18 UTC (permalink / raw)
  To: Sebastien Bourdelin, Arnd Bergmann, linux-arm-kernel
  Cc: Linus Walleij, Bartosz Golaszewski, linux-gpio, linux-kernel,
	Andy Shevchenko, David Lechner

Use bitmap_set_value8() instead of accessing the bitmap directly.

Accessing the bitmap directly is not considered good practice. We now
have a helper function that can be used instead, so let's use it.

The bitmap has to be zero-initialized now to avoid a compiler warning
since bitmap_set_value8() does read/modify/write rather than just the
write that this is replacing.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
---
v4 changes:
- Fix typo s/get/set/ in commit message
- Zero-initialize the bitmap to avoid compiler warning
---
 drivers/bus/ts-nbus.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/bus/ts-nbus.c b/drivers/bus/ts-nbus.c
index b4c9308caf0647a3261071d9527fffce77784af2..17540034e64a4e591ea61b0b4eef86a2081b02f5 100644
--- a/drivers/bus/ts-nbus.c
+++ b/drivers/bus/ts-nbus.c
@@ -10,6 +10,7 @@
  * TS-4600 SoM.
  */
 
+#include <linux/bitmap.h>
 #include <linux/bitops.h>
 #include <linux/gpio/consumer.h>
 #include <linux/kernel.h>
@@ -105,9 +106,9 @@ static void ts_nbus_set_direction(struct ts_nbus *ts_nbus, int direction)
  */
 static void ts_nbus_reset_bus(struct ts_nbus *ts_nbus)
 {
-	DECLARE_BITMAP(values, 8);
+	DECLARE_BITMAP(values, 8) = { };
 
-	values[0] = 0;
+	bitmap_set_value8(values, byte, 0);
 
 	gpiod_multi_set_value_cansleep(ts_nbus->data, values);
 	gpiod_set_value_cansleep(ts_nbus->csn, 0);
@@ -149,9 +150,9 @@ static int ts_nbus_read_byte(struct ts_nbus *ts_nbus, u8 *val)
  */
 static void ts_nbus_write_byte(struct ts_nbus *ts_nbus, u8 byte)
 {
-	DECLARE_BITMAP(values, 8);
+	DECLARE_BITMAP(values, 8) = { };
 
-	values[0] = byte;
+	bitmap_set_value8(values, byte, 8);
 
 	gpiod_multi_set_value_cansleep(ts_nbus->data, values);
 }

-- 
2.43.0



^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH v4 3/3] bus: ts-nbus: use bitmap_set_value8()
  2025-06-11 20:18 ` [PATCH v4 3/3] bus: ts-nbus: use bitmap_set_value8() David Lechner
@ 2025-06-11 20:26   ` David Lechner
  0 siblings, 0 replies; 5+ messages in thread
From: David Lechner @ 2025-06-11 20:26 UTC (permalink / raw)
  To: Sebastien Bourdelin, Arnd Bergmann, linux-arm-kernel
  Cc: Linus Walleij, Bartosz Golaszewski, linux-gpio, linux-kernel,
	Andy Shevchenko

On 6/11/25 3:18 PM, David Lechner wrote:
> Use bitmap_set_value8() instead of accessing the bitmap directly.
> 
> Accessing the bitmap directly is not considered good practice. We now
> have a helper function that can be used instead, so let's use it.
> 
> The bitmap has to be zero-initialized now to avoid a compiler warning
> since bitmap_set_value8() does read/modify/write rather than just the
> write that this is replacing.
> 
> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: David Lechner <dlechner@baylibre.com>
> ---
> v4 changes:
> - Fix typo s/get/set/ in commit message
> - Zero-initialize the bitmap to avoid compiler warning
> ---
>  drivers/bus/ts-nbus.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/bus/ts-nbus.c b/drivers/bus/ts-nbus.c
> index b4c9308caf0647a3261071d9527fffce77784af2..17540034e64a4e591ea61b0b4eef86a2081b02f5 100644
> --- a/drivers/bus/ts-nbus.c
> +++ b/drivers/bus/ts-nbus.c
> @@ -10,6 +10,7 @@
>   * TS-4600 SoM.
>   */
>  
> +#include <linux/bitmap.h>
>  #include <linux/bitops.h>
>  #include <linux/gpio/consumer.h>
>  #include <linux/kernel.h>
> @@ -105,9 +106,9 @@ static void ts_nbus_set_direction(struct ts_nbus *ts_nbus, int direction)
>   */
>  static void ts_nbus_reset_bus(struct ts_nbus *ts_nbus)
>  {
> -	DECLARE_BITMAP(values, 8);
> +	DECLARE_BITMAP(values, 8) = { };
>  
> -	values[0] = 0;
> +	bitmap_set_value8(values, byte, 0);

I got distracted by an appointment and forgot to compile test before
sending. :-(

byte is undefined here. Will send v5 soon.

>  
>  	gpiod_multi_set_value_cansleep(ts_nbus->data, values);
>  	gpiod_set_value_cansleep(ts_nbus->csn, 0);
> @@ -149,9 +150,9 @@ static int ts_nbus_read_byte(struct ts_nbus *ts_nbus, u8 *val)
>   */
>  static void ts_nbus_write_byte(struct ts_nbus *ts_nbus, u8 byte)
>  {
> -	DECLARE_BITMAP(values, 8);
> +	DECLARE_BITMAP(values, 8) = { };
>  
> -	values[0] = byte;
> +	bitmap_set_value8(values, byte, 8);
>  
>  	gpiod_multi_set_value_cansleep(ts_nbus->data, values);
>  }
> 



^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2025-06-11 22:56 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-06-11 20:18 [PATCH v4 0/3] bus: ts-nbus: use gpiod_multi_set_value_cansleep David Lechner
2025-06-11 20:18 ` [PATCH v4 1/3] bus: ts-nbus: validate ts,data-gpios array size David Lechner
2025-06-11 20:18 ` [PATCH v4 2/3] bus: ts-nbus: use gpiod_multi_set_value_cansleep David Lechner
2025-06-11 20:18 ` [PATCH v4 3/3] bus: ts-nbus: use bitmap_set_value8() David Lechner
2025-06-11 20:26   ` David Lechner

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).