From: Sean Anderson <sean.anderson@linux.dev>
To: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
netdev@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Simek <michal.simek@amd.com>,
Saravana Kannan <saravanak@google.com>,
Leon Romanovsky <leon@kernel.org>,
Dave Ertman <david.m.ertman@intel.com>,
linux-kernel@vger.kernel.org, Ira Weiny <ira.weiny@intel.com>,
linux-arm-kernel@lists.infradead.org,
Sean Anderson <sean.anderson@linux.dev>
Subject: [PATCH net 2/4] net: axienet: Fix resource release ordering
Date: Thu, 19 Jun 2025 16:05:35 -0400 [thread overview]
Message-ID: <20250619200537.260017-3-sean.anderson@linux.dev> (raw)
In-Reply-To: <20250619200537.260017-1-sean.anderson@linux.dev>
Device-managed resources are released after manually-managed resources.
Therefore, once any manually-managed resource is acquired, all further
resources must be manually-managed too.
Convert all resources before the MDIO bus is created into device-managed
resources. In all cases but one there are already devm variants available.
Fixes: 46aa27df8853 ("net: axienet: Use devm_* calls")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---
.../net/ethernet/xilinx/xilinx_axienet_main.c | 89 ++++++++-----------
1 file changed, 37 insertions(+), 52 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 6011d7eae0c7..1f277e5e4a62 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -2744,6 +2744,11 @@ static void axienet_dma_err_handler(struct work_struct *work)
axienet_setoptions(ndev, lp->options);
}
+static void axienet_disable_misc(void *clocks)
+{
+ clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, clocks);
+}
+
/**
* axienet_probe - Axi Ethernet probe function.
* @pdev: Pointer to platform device structure.
@@ -2767,7 +2772,7 @@ static int axienet_probe(struct platform_device *pdev)
int addr_width = 32;
u32 value;
- ndev = alloc_etherdev(sizeof(*lp));
+ ndev = devm_alloc_etherdev(&pdev->dev, sizeof(*lp));
if (!ndev)
return -ENOMEM;
@@ -2795,22 +2800,17 @@ static int axienet_probe(struct platform_device *pdev)
seqcount_mutex_init(&lp->hw_stats_seqcount, &lp->stats_lock);
INIT_DEFERRABLE_WORK(&lp->stats_work, axienet_refresh_stats);
- lp->axi_clk = devm_clk_get_optional(&pdev->dev, "s_axi_lite_clk");
+ lp->axi_clk = devm_clk_get_optional_enabled(&pdev->dev,
+ "s_axi_lite_clk");
if (!lp->axi_clk) {
/* For backward compatibility, if named AXI clock is not present,
* treat the first clock specified as the AXI clock.
*/
- lp->axi_clk = devm_clk_get_optional(&pdev->dev, NULL);
- }
- if (IS_ERR(lp->axi_clk)) {
- ret = PTR_ERR(lp->axi_clk);
- goto free_netdev;
- }
- ret = clk_prepare_enable(lp->axi_clk);
- if (ret) {
- dev_err(&pdev->dev, "Unable to enable AXI clock: %d\n", ret);
- goto free_netdev;
+ lp->axi_clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
}
+ if (IS_ERR(lp->axi_clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(lp->axi_clk),
+ "could not get AXI clock\n");
lp->misc_clks[0].id = "axis_clk";
lp->misc_clks[1].id = "ref_clk";
@@ -2818,18 +2818,23 @@ static int axienet_probe(struct platform_device *pdev)
ret = devm_clk_bulk_get_optional(&pdev->dev, XAE_NUM_MISC_CLOCKS, lp->misc_clks);
if (ret)
- goto cleanup_clk;
+ return dev_err_probe(&pdev->dev, ret,
+ "could not get misc. clocks\n");
ret = clk_bulk_prepare_enable(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
if (ret)
- goto cleanup_clk;
+ return dev_err_probe(&pdev->dev, ret,
+ "could not enable misc. clocks\n");
+
+ ret = devm_add_action_or_reset(&pdev->dev, axienet_disable_misc,
+ lp->misc_clks);
+ if (ret)
+ return ret;
/* Map device registers */
lp->regs = devm_platform_get_and_ioremap_resource(pdev, 0, ðres);
- if (IS_ERR(lp->regs)) {
- ret = PTR_ERR(lp->regs);
- goto cleanup_clk;
- }
+ if (IS_ERR(lp->regs))
+ return PTR_ERR(lp->regs);
lp->regs_start = ethres->start;
/* Setup checksum offload, but default to off if not specified */
@@ -2898,19 +2903,17 @@ static int axienet_probe(struct platform_device *pdev)
lp->phy_mode = PHY_INTERFACE_MODE_1000BASEX;
break;
default:
- ret = -EINVAL;
- goto cleanup_clk;
+ return -EINVAL;
}
} else {
ret = of_get_phy_mode(pdev->dev.of_node, &lp->phy_mode);
if (ret)
- goto cleanup_clk;
+ return ret;
}
if (lp->switch_x_sgmii && lp->phy_mode != PHY_INTERFACE_MODE_SGMII &&
lp->phy_mode != PHY_INTERFACE_MODE_1000BASEX) {
dev_err(&pdev->dev, "xlnx,switch-x-sgmii only supported with SGMII or 1000BaseX\n");
- ret = -EINVAL;
- goto cleanup_clk;
+ return -EINVAL;
}
if (!of_property_present(pdev->dev.of_node, "dmas")) {
@@ -2925,7 +2928,7 @@ static int axienet_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"unable to get DMA resource\n");
of_node_put(np);
- goto cleanup_clk;
+ return ret;
}
lp->dma_regs = devm_ioremap_resource(&pdev->dev,
&dmares);
@@ -2942,19 +2945,17 @@ static int axienet_probe(struct platform_device *pdev)
}
if (IS_ERR(lp->dma_regs)) {
dev_err(&pdev->dev, "could not map DMA regs\n");
- ret = PTR_ERR(lp->dma_regs);
- goto cleanup_clk;
+ return PTR_ERR(lp->dma_regs);
}
if (lp->rx_irq <= 0 || lp->tx_irq <= 0) {
dev_err(&pdev->dev, "could not determine irqs\n");
- ret = -ENOMEM;
- goto cleanup_clk;
+ return -ENOMEM;
}
/* Reset core now that clocks are enabled, prior to accessing MDIO */
ret = __axienet_device_reset(lp);
if (ret)
- goto cleanup_clk;
+ return ret;
/* Autodetect the need for 64-bit DMA pointers.
* When the IP is configured for a bus width bigger than 32 bits,
@@ -2981,14 +2982,13 @@ static int axienet_probe(struct platform_device *pdev)
}
if (!IS_ENABLED(CONFIG_64BIT) && lp->features & XAE_FEATURE_DMA_64BIT) {
dev_err(&pdev->dev, "64-bit addressable DMA is not compatible with 32-bit architecture\n");
- ret = -EINVAL;
- goto cleanup_clk;
+ return -EINVAL;
}
ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(addr_width));
if (ret) {
dev_err(&pdev->dev, "No suitable DMA available\n");
- goto cleanup_clk;
+ return ret;
}
netif_napi_add(ndev, &lp->napi_rx, axienet_rx_poll);
netif_napi_add(ndev, &lp->napi_tx, axienet_tx_poll);
@@ -2998,15 +2998,12 @@ static int axienet_probe(struct platform_device *pdev)
lp->eth_irq = platform_get_irq_optional(pdev, 0);
if (lp->eth_irq < 0 && lp->eth_irq != -ENXIO) {
- ret = lp->eth_irq;
- goto cleanup_clk;
+ return lp->eth_irq;
}
tx_chan = dma_request_chan(lp->dev, "tx_chan0");
- if (IS_ERR(tx_chan)) {
- ret = PTR_ERR(tx_chan);
- dev_err_probe(lp->dev, ret, "No Ethernet DMA (TX) channel found\n");
- goto cleanup_clk;
- }
+ if (IS_ERR(tx_chan))
+ return dev_err_probe(lp->dev, PTR_ERR(tx_chan),
+ "No Ethernet DMA (TX) channel found\n");
cfg.reset = 1;
/* As name says VDMA but it has support for DMA channel reset */
@@ -3014,7 +3011,7 @@ static int axienet_probe(struct platform_device *pdev)
if (ret < 0) {
dev_err(&pdev->dev, "Reset channel failed\n");
dma_release_channel(tx_chan);
- goto cleanup_clk;
+ return ret;
}
dma_release_channel(tx_chan);
@@ -3119,13 +3116,6 @@ static int axienet_probe(struct platform_device *pdev)
put_device(&lp->pcs_phy->dev);
if (lp->mii_bus)
axienet_mdio_teardown(lp);
-cleanup_clk:
- clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
- clk_disable_unprepare(lp->axi_clk);
-
-free_netdev:
- free_netdev(ndev);
-
return ret;
}
@@ -3143,11 +3133,6 @@ static void axienet_remove(struct platform_device *pdev)
put_device(&lp->pcs_phy->dev);
axienet_mdio_teardown(lp);
-
- clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
- clk_disable_unprepare(lp->axi_clk);
-
- free_netdev(ndev);
}
static void axienet_shutdown(struct platform_device *pdev)
--
2.35.1.1320.gc452695387.dirty
next prev parent reply other threads:[~2025-06-19 20:42 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-19 20:05 [PATCH net 0/4] net: axienet: Fix deferred probe loop Sean Anderson
2025-06-19 20:05 ` [PATCH net 1/4] auxiliary: Allow empty id Sean Anderson
2025-06-20 5:13 ` Greg Kroah-Hartman
2025-06-20 15:37 ` Sean Anderson
2025-06-20 16:02 ` Greg Kroah-Hartman
2025-06-20 16:09 ` Sean Anderson
2025-06-20 16:15 ` Greg Kroah-Hartman
2025-06-20 16:33 ` Sean Anderson
2025-06-19 20:05 ` Sean Anderson [this message]
2025-06-19 20:05 ` [PATCH net 3/4] net: axienet: Rearrange lifetime functions Sean Anderson
2025-06-19 20:05 ` [PATCH net 4/4] net: axienet: Split into MAC and MDIO drivers Sean Anderson
2025-06-19 23:10 ` Jakub Kicinski
2025-06-19 23:19 ` Sean Anderson
2025-06-20 14:03 ` kernel test robot
2025-06-21 7:33 ` Andrew Lunn
2025-06-23 15:16 ` Sean Anderson
2025-06-23 18:27 ` Andrew Lunn
2025-06-23 18:48 ` Sean Anderson
2025-06-23 22:45 ` Andrew Lunn
2025-06-23 23:16 ` Sean Anderson
2025-07-10 23:37 ` Sean Anderson
2025-06-20 5:10 ` [PATCH net 0/4] net: axienet: Fix deferred probe loop Greg Kroah-Hartman
2025-06-20 15:41 ` Sean Anderson
2025-06-20 16:01 ` Greg Kroah-Hartman
2025-06-20 16:34 ` Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250619200537.260017-3-sean.anderson@linux.dev \
--to=sean.anderson@linux.dev \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=david.m.ertman@intel.com \
--cc=edumazet@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=ira.weiny@intel.com \
--cc=kuba@kernel.org \
--cc=leon@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@amd.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=radhey.shyam.pandey@amd.com \
--cc=saravanak@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).