From: Aleksander Jan Bajkowski <olek2@wp.pl>
To: jic23@kernel.org, dlechner@baylibre.com, nuno.sa@analog.com,
andy@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, matthias.bgg@gmail.com,
angelogioacchino.delregno@collabora.com, olek2@wp.pl,
zhiyong.tao@mediatek.com, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH v2 2/2] arm64: dts: mediatek: add thermal sensor support on mt7981
Date: Wed, 2 Jul 2025 23:48:30 +0200 [thread overview]
Message-ID: <20250702214830.255898-3-olek2@wp.pl> (raw)
In-Reply-To: <20250702214830.255898-1-olek2@wp.pl>
The temperature sensor in the MT7981 is same as in the MT7986.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---
arch/arm64/boot/dts/mediatek/mt7981b.dtsi | 32 ++++++++++++++++++++++-
1 file changed, 31 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
index 5cbea9cd411f..759b9e8059d9 100644
--- a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
@@ -76,7 +76,7 @@ watchdog: watchdog@1001c000 {
#reset-cells = <1>;
};
- clock-controller@1001e000 {
+ apmixedsys: clock-controller@1001e000 {
compatible = "mediatek,mt7981-apmixedsys";
reg = <0 0x1001e000 0 0x1000>;
#clock-cells = <1>;
@@ -184,6 +184,32 @@ spi@1100b000 {
status = "disabled";
};
+ thermal@1100c800 {
+ compatible = "mediatek,mt7981-thermal",
+ "mediatek,mt7986-thermal";
+ reg = <0 0x1100c800 0 0x800>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&infracfg CLK_INFRA_THERM_CK>,
+ <&infracfg CLK_INFRA_ADC_26M_CK>;
+ clock-names = "therm", "auxadc";
+ nvmem-cells = <&thermal_calibration>;
+ nvmem-cell-names = "calibration-data";
+ #thermal-sensor-cells = <1>;
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ };
+
+ auxadc: adc@1100d000 {
+ compatible = "mediatek,mt7981-auxadc",
+ "mediatek,mt7986-auxadc",
+ "mediatek,mt7622-auxadc";
+ reg = <0 0x1100d000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_ADC_26M_CK>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
pio: pinctrl@11d00000 {
compatible = "mediatek,mt7981-pinctrl";
reg = <0 0x11d00000 0 0x1000>,
@@ -211,6 +237,10 @@ efuse@11f20000 {
reg = <0 0x11f20000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ thermal_calibration: thermal-calib@274 {
+ reg = <0x274 0xc>;
+ };
};
clock-controller@15000000 {
--
2.39.5
next prev parent reply other threads:[~2025-07-02 21:51 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-02 21:48 [PATCH v2 0/2] Add thermal sensors support for MT7981 Aleksander Jan Bajkowski
2025-07-02 21:48 ` [PATCH v2 1/2] dt-bindings: iio: adc: Add " Aleksander Jan Bajkowski
2025-07-02 22:01 ` David Lechner
2025-07-03 7:48 ` Krzysztof Kozlowski
2025-07-02 21:48 ` Aleksander Jan Bajkowski [this message]
2025-07-03 7:47 ` [PATCH v2 2/2] arm64: dts: mediatek: add thermal sensor support on mt7981 Krzysztof Kozlowski
2025-07-03 13:41 ` [PATCH v2 0/2] Add thermal sensors support for MT7981 Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250702214830.255898-3-olek2@wp.pl \
--to=olek2@wp.pl \
--cc=andy@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
--cc=zhiyong.tao@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox