[PATCH v2] ARM: dts: imx6ulz-bsh-smm-m2: fix resume via console

[Dario Binacchi <dario.binacchi@amarulasolutions.com>]

From: Wolfgang Birkner <wolfgang.birkner@bshg.com>

Despite the current configuration being compliant with the technical
reference manual (TRM), testing on the system showed that resuming from
suspend via UART4 (used as the console) fails unless any other UART
is also enabled.

In our use case, UART2 is enabled to ensure reliable resume when UART4
is used as the console.

Signed-off-by: Wolfgang Birkner <wolfgang.birkner@bshg.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

Changes in v2:
- Improve commit message
- Drop patches:
  - 1/3 ARM: dts: imx6ulz-bsh-smm-m2: Enable hardware rng
  - 3/3 ARM: dts: imx6ulz-bsh-smm-m2: Update wifi/bluetooth pinctrl

 arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
index 6159ed70d966..2d9f495660c9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
@@ -33,6 +33,10 @@ &snvs_poweroff {
 	status = "okay";
 };
 
+&uart2 {
+	status = "okay";
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-- 
2.43.0