public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Claudiu <claudiu.beznea@tuxon.dev>,
	Manivannan Sadhasivam <mani@kernel.org>
Cc: bhelgaas@google.com, lpieralisi@kernel.org, kw@linux.com,
	robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
	geert+renesas@glider.be, magnus.damm@gmail.com,
	mturquette@baylibre.com, sboyd@kernel.org,
	p.zabel@pengutronix.de, linux-pci@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
	john.madieu.xa@bp.renesas.com,
	Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Subject: Re: [PATCH v2 0/8] PCI: rzg3s-host: Add PCIe driver for Renesas RZ/G3S SoC
Date: Tue, 15 Jul 2025 09:46:16 -0500	[thread overview]
Message-ID: <20250715144616.GA2458869@bhelgaas> (raw)
In-Reply-To: <20250530111917.1495023-1-claudiu.beznea.uj@bp.renesas.com>

On Fri, May 30, 2025 at 02:19:09PM +0300, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> Hi,
> 
> Series adds a PCIe driver for the Renesas RZ/G3S SoC.
> It is split as follows:
> - patch 1/8:		updates the max register offset for RZ/G3S SYSC;
> 			this is necessary as the PCIe need to setup the
> 			SYSC for proper functioning
> - patch 2/8:		adds clock, reset and power domain support for
> 			the PCIe IP
> - patches 3-4/8:	add PCIe support for the RZ/G3S SoC
> - patches 5-8/8:	add device tree support and defconfig flag
> 
> Please provide your feedback.
> 
> Merge strategy, if any:
> - patches 1-2,5-8/8 can go through the Renesas tree
> - patches 3-4/8 can go through the PCI tree
> 
> Thank you,
> Claudiu Beznea
> 
> Changes in v2:
> - dropped "of/irq: Export of_irq_count()" as it is not needed anymore
>   in this version
> - added "arm64: dts: renesas: rzg3s-smarc-som: Update dma-ranges for PCIe"
>   to reflect the board specific memory constraints
> - addressed review comments
> - updated patch "soc: renesas: rz-sysc: Add syscon/regmap support"
> - per-patch changes are described in each individual patch
> 
> Claudiu Beznea (7):
>   clk: renesas: r9a08g045: Add clocks, resets and power domain support
>     for the PCIe
>   dt-bindings: PCI: renesas,r9a08g045s33-pcie: Add documentation for the
>     PCIe IP on Renesas RZ/G3S
>   PCI: rzg3s-host: Add Initial PCIe Host Driver for Renesas RZ/G3S SoC
>   arm64: dts: renesas: r9a08g045s33: Add PCIe node
>   arm64: dts: renesas: rzg3s-smarc-som: Update dma-ranges for PCIe
>   arm64: dts: renesas: rzg3s-smarc: Enable PCIe
>   arm64: defconfig: Enable PCIe for the Renesas RZ/G3S SoC
> 
> John Madieu (1):
>   soc: renesas: rz-sysc: Add syscon/regmap support
> 
>  .../pci/renesas,r9a08g045s33-pcie.yaml        |  202 ++
>  MAINTAINERS                                   |    8 +
>  arch/arm64/boot/dts/renesas/r9a08g045s33.dtsi |   60 +
>  .../boot/dts/renesas/rzg3s-smarc-som.dtsi     |    5 +
>  arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi  |   11 +
>  arch/arm64/configs/defconfig                  |    1 +
>  drivers/clk/renesas/r9a08g045-cpg.c           |   19 +
>  drivers/pci/controller/Kconfig                |    7 +
>  drivers/pci/controller/Makefile               |    1 +
>  drivers/pci/controller/pcie-rzg3s-host.c      | 1686 +++++++++++++++++
>  drivers/soc/renesas/Kconfig                   |    1 +
>  drivers/soc/renesas/r9a08g045-sysc.c          |   10 +
>  drivers/soc/renesas/r9a09g047-sys.c           |   10 +
>  drivers/soc/renesas/r9a09g057-sys.c           |   10 +
>  drivers/soc/renesas/rz-sysc.c                 |   17 +-
>  drivers/soc/renesas/rz-sysc.h                 |    3 +
>  16 files changed, 2050 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/pci/renesas,r9a08g045s33-pcie.yaml
>  create mode 100644 drivers/pci/controller/pcie-rzg3s-host.c

Where are we at with this series?

I see
https://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git/commit/?h=controller/dwc-stm32&id=5a972a01e24b278f7302a834c6eaee5bdac12843,
but also this kernel robot report at that commit:
https://lore.kernel.org/all/202506270620.sf6EApJY-lkp@intel.com/

I normally don't include branches in pci/next until we get a
"BUILD SUCCESS" report from the robot, so this branch is in limbo at
the moment.

Bjorn


      parent reply	other threads:[~2025-07-15 16:22 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-30 11:19 [PATCH v2 0/8] PCI: rzg3s-host: Add PCIe driver for Renesas RZ/G3S SoC Claudiu
2025-05-30 11:19 ` [PATCH v2 1/8] soc: renesas: rz-sysc: Add syscon/regmap support Claudiu
2025-05-30 11:19 ` [PATCH v2 2/8] clk: renesas: r9a08g045: Add clocks, resets and power domain support for the PCIe Claudiu
2025-05-30 11:19 ` [PATCH v2 3/8] dt-bindings: PCI: renesas,r9a08g045s33-pcie: Add documentation for the PCIe IP on Renesas RZ/G3S Claudiu
2025-06-05 22:13   ` Rob Herring (Arm)
2025-06-17 17:04   ` Manivannan Sadhasivam
2025-05-30 11:19 ` [PATCH v2 4/8] PCI: rzg3s-host: Add Initial PCIe Host Driver for Renesas RZ/G3S SoC Claudiu
2025-06-02 16:18   ` Ilpo Järvinen
2025-06-05 10:37     ` Claudiu Beznea
2025-06-05 22:57   ` Bjorn Helgaas
2025-06-06  9:12     ` Claudiu Beznea
2025-06-18 17:42   ` Manivannan Sadhasivam
2025-06-20 19:35     ` Manivannan Sadhasivam
2025-06-25 13:08       ` Claudiu Beznea
2025-06-25 13:07     ` Claudiu Beznea
2025-06-25 17:54       ` Bjorn Helgaas
2025-05-30 11:19 ` [PATCH v2 5/8] arm64: dts: renesas: r9a08g045s33: Add PCIe node Claudiu
2025-05-30 11:19 ` [PATCH v2 6/8] arm64: dts: renesas: rzg3s-smarc-som: Update dma-ranges for PCIe Claudiu
2025-05-30 11:19 ` [PATCH v2 7/8] arm64: dts: renesas: rzg3s-smarc: Enable PCIe Claudiu
2025-05-30 11:19 ` [PATCH v2 8/8] arm64: defconfig: Enable PCIe for the Renesas RZ/G3S SoC Claudiu
2025-06-02  7:16 ` [PATCH v2 0/8] PCI: rzg3s-host: Add PCIe driver for " Wolfram Sang
2025-07-15 14:46 ` Bjorn Helgaas [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250715144616.GA2458869@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=claudiu.beznea.uj@bp.renesas.com \
    --cc=claudiu.beznea@tuxon.dev \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=john.madieu.xa@bp.renesas.com \
    --cc=krzk+dt@kernel.org \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mani@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox