Re: [PATCH v2 02/10] dt-bindings: soc: aspeed: Add ASPEED PCIe PHY support

[Krzysztof Kozlowski <krzk@kernel.org>]

On Tue, Jul 15, 2025 at 11:43:12AM +0800, Jacky Chou wrote:
> This PHY is used by many modules. In our design, our
> PCIe has RC and EP funcitons. On the different function,
> each driver will use configure and get some information
> from the PHY interface to do somting that it wants to.
> Getting link status, setting syscon credits and so on.
> Therefore, define it as syscon for all modules.
> 
> Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
> ---
>  .../bindings/soc/aspeed/aspeed,pcie-phy.yaml  | 44 +++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/aspeed/aspeed,pcie-phy.yaml

Phys go to phy, not soc directory. Soc is not a dumping ground.

> 
> diff --git a/Documentation/devicetree/bindings/soc/aspeed/aspeed,pcie-phy.yaml b/Documentation/devicetree/bindings/soc/aspeed/aspeed,pcie-phy.yaml
> new file mode 100644
> index 000000000000..5fa585d63ca6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/aspeed/aspeed,pcie-phy.yaml
> @@ -0,0 +1,44 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/aspeed/aspeed,pcie-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED PCIe PHY
> +
> +maintainers:
> +  - Jacky Chou <jacky_chou@aspeedtech.com>
> +
> +description:
> +  The ASPEED PCIe PHY provides the physical layer interface for PCIe
> +  controllers in the SoC. This node represents the register block for the PCIe
> +  PHY, which is typically accessed by PCIe Root Complex or Endpoint drivers
> +  via syscon. It is used to configure and get the status of the PCIe PHY
> +  hardware, including power management, link training, and other PHY-specific
> +  operations.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - aspeed,pcie-phy

No, see writing bindings.

> +      - const: syscon

It's not a syscon, but phy. I don't think you understood previous
feedback. Go back to v1. You just send something to pass the review
instead of reworking to make it correct.

> +
> +  reg:
> +    maxItems: 1
> +
> +  "#phy-cells":
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    syscon@1e6ed200 {

wrong name, that's a phy

> +      compatible = "aspeed,pcie-phy", "syscon";
> +      reg = <0x1e6ed200 0x100>;

Incomplete

> +    };
> -- 
> 2.43.0
>