From: Fred Chen <fredchen.openbmc@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/4] ARM: dts: aspeed: santabarbara: add sensor support for extension boards
Date: Thu, 14 Aug 2025 21:16:57 +0800 [thread overview]
Message-ID: <20250814131706.1567067-2-fredchen.openbmc@gmail.com> (raw)
In-Reply-To: <20250814131706.1567067-1-fredchen.openbmc@gmail.com>
add power monitor and temperature sensors for extension boards in bus 6,
8, 10 and 13.
Signed-off-by: Fred Chen <fredchen.openbmc@gmail.com>
---
.../aspeed-bmc-facebook-santabarbara.dts | 824 ++++++++++++++++++
1 file changed, 824 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
index ee93a971c500..2f5712e9ba9f 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
@@ -39,6 +39,38 @@ aliases {
i2c37 = &i2c12mux0ch5;
i2c38 = &i2c12mux0ch6;
i2c39 = &i2c12mux0ch7;
+ i2c48 = &i2c6mux0ch0;
+ i2c49 = &i2c6mux0ch1;
+ i2c50 = &i2c6mux0ch2;
+ i2c51 = &i2c6mux0ch3;
+ i2c52 = &i2c8mux0ch0;
+ i2c53 = &i2c8mux0ch1;
+ i2c54 = &i2c8mux0ch2;
+ i2c55 = &i2c8mux0ch3;
+ i2c56 = &i2c10mux0ch0;
+ i2c57 = &i2c10mux0ch1;
+ i2c58 = &i2c10mux0ch2;
+ i2c59 = &i2c10mux0ch3;
+ i2c60 = &i2c13mux0ch0;
+ i2c61 = &i2c13mux0ch1;
+ i2c62 = &i2c13mux0ch2;
+ i2c63 = &i2c13mux0ch3;
+ i2c64 = &i2c6mux1ch0;
+ i2c65 = &i2c6mux1ch1;
+ i2c66 = &i2c6mux1ch2;
+ i2c67 = &i2c6mux1ch3;
+ i2c68 = &i2c8mux1ch0;
+ i2c69 = &i2c8mux1ch1;
+ i2c70 = &i2c8mux1ch2;
+ i2c71 = &i2c8mux1ch3;
+ i2c72 = &i2c10mux1ch0;
+ i2c73 = &i2c10mux1ch1;
+ i2c74 = &i2c10mux1ch2;
+ i2c75 = &i2c10mux1ch3;
+ i2c76 = &i2c13mux1ch0;
+ i2c77 = &i2c13mux1ch1;
+ i2c78 = &i2c13mux1ch2;
+ i2c79 = &i2c13mux1ch3;
};
chosen {
@@ -574,6 +606,204 @@ eeprom@52 {
compatible = "atmel,24c256";
reg = <0x52>;
};
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c6mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temperature-sensor@64 {
+ compatible = "microchip,mcp9600";
+ reg = <0x64>;
+ };
+
+ temperature-sensor@65 {
+ compatible = "microchip,mcp9600";
+ reg = <0x65>;
+ };
+
+ temperature-sensor@67 {
+ compatible = "microchip,mcp9600";
+ reg = <0x67>;
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c6mux1ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c6mux1ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ voltage-sensor@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+
+ voltage-sensorr@49 {
+ compatible = "ti,ads7830";
+ reg = <0x49>;
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp175";
+ reg = <0x4a>;
+ };
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp175";
+ reg = <0x4b>;
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c256";
+ reg = <0x56>;
+ };
+ };
+ i2c6mux1ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c6mux1ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+ i2c6mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ potentiometer@2c {
+ compatible = "adi,ad5272-020";
+ reg = <0x2c>;
+ };
+
+ potentiometer@2e {
+ compatible = "adi,ad5272-020";
+ reg = <0x2e>;
+ };
+
+ potentiometer@2f {
+ compatible = "adi,ad5272-020";
+ reg = <0x2f>;
+ };
+
+ power-monitor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+ };
+ i2c6mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ potentiometer@2c {
+ compatible = "adi,ad5272-020";
+ reg = <0x2c>;
+ };
+
+ potentiometer@2e {
+ compatible = "adi,ad5272-020";
+ reg = <0x2e>;
+ };
+
+ potentiometer@2f {
+ compatible = "adi,ad5272-020";
+ reg = <0x2f>;
+ };
+
+ power-monitor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+ };
+ i2c6mux0ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ voltage-sensor@1d {
+ compatible = "ti,adc128d818";
+ reg = <0x1d>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ voltage-sensor@37 {
+ compatible = "ti,adc128d818";
+ reg = <0x37>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ power-monitor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp175";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp175";
+ reg = <0x49>;
+ };
+ };
+ };
};
&i2c7 {
@@ -588,6 +818,204 @@ eeprom@52 {
compatible = "atmel,24c256";
reg = <0x52>;
};
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c8mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temperature-sensor@64 {
+ compatible = "microchip,mcp9600";
+ reg = <0x64>;
+ };
+
+ temperature-sensor@65 {
+ compatible = "microchip,mcp9600";
+ reg = <0x65>;
+ };
+
+ temperature-sensor@67 {
+ compatible = "microchip,mcp9600";
+ reg = <0x67>;
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c8mux1ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c8mux1ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ voltage-sensor@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+
+ voltage-sensorr@49 {
+ compatible = "ti,ads7830";
+ reg = <0x49>;
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp175";
+ reg = <0x4a>;
+ };
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp175";
+ reg = <0x4b>;
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c256";
+ reg = <0x56>;
+ };
+ };
+ i2c8mux1ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c8mux1ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+ i2c8mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ potentiometer@2c {
+ compatible = "adi,ad5272-020";
+ reg = <0x2c>;
+ };
+
+ potentiometer@2e {
+ compatible = "adi,ad5272-020";
+ reg = <0x2e>;
+ };
+
+ potentiometer@2f {
+ compatible = "adi,ad5272-020";
+ reg = <0x2f>;
+ };
+
+ power-monitor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+ };
+ i2c8mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ potentiometer@2c {
+ compatible = "adi,ad5272-020";
+ reg = <0x2c>;
+ };
+
+ potentiometer@2e {
+ compatible = "adi,ad5272-020";
+ reg = <0x2e>;
+ };
+
+ potentiometer@2f {
+ compatible = "adi,ad5272-020";
+ reg = <0x2f>;
+ };
+
+ power-monitor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+ };
+ i2c8mux0ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ voltage-sensor@1d {
+ compatible = "ti,adc128d818";
+ reg = <0x1d>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ voltage-sensor@37 {
+ compatible = "ti,adc128d818";
+ reg = <0x37>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ power-monitor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp175";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp175";
+ reg = <0x49>;
+ };
+ };
+ };
};
&i2c9 {
@@ -619,6 +1047,204 @@ eeprom@52 {
compatible = "atmel,24c256";
reg = <0x52>;
};
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c10mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temperature-sensor@64 {
+ compatible = "microchip,mcp9600";
+ reg = <0x64>;
+ };
+
+ temperature-sensor@65 {
+ compatible = "microchip,mcp9600";
+ reg = <0x65>;
+ };
+
+ temperature-sensor@67 {
+ compatible = "microchip,mcp9600";
+ reg = <0x67>;
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c10mux1ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c10mux1ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ voltage-sensor@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+
+ voltage-sensorr@49 {
+ compatible = "ti,ads7830";
+ reg = <0x49>;
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp175";
+ reg = <0x4a>;
+ };
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp175";
+ reg = <0x4b>;
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c256";
+ reg = <0x56>;
+ };
+ };
+ i2c10mux1ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c10mux1ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+ i2c10mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ potentiometer@2c {
+ compatible = "adi,ad5272-020";
+ reg = <0x2c>;
+ };
+
+ potentiometer@2e {
+ compatible = "adi,ad5272-020";
+ reg = <0x2e>;
+ };
+
+ potentiometer@2f {
+ compatible = "adi,ad5272-020";
+ reg = <0x2f>;
+ };
+
+ power-monitor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+ };
+ i2c10mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ potentiometer@2c {
+ compatible = "adi,ad5272-020";
+ reg = <0x2c>;
+ };
+
+ potentiometer@2e {
+ compatible = "adi,ad5272-020";
+ reg = <0x2e>;
+ };
+
+ potentiometer@2f {
+ compatible = "adi,ad5272-020";
+ reg = <0x2f>;
+ };
+
+ power-monitor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+ };
+ i2c10mux0ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ voltage-sensor@1d {
+ compatible = "ti,adc128d818";
+ reg = <0x1d>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ voltage-sensor@37 {
+ compatible = "ti,adc128d818";
+ reg = <0x37>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ power-monitor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp175";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp175";
+ reg = <0x49>;
+ };
+ };
+ };
};
&i2c11 {
@@ -748,6 +1374,204 @@ eeprom@52 {
compatible = "atmel,24c256";
reg = <0x52>;
};
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c13mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temperature-sensor@64 {
+ compatible = "microchip,mcp9600";
+ reg = <0x64>;
+ };
+
+ temperature-sensor@65 {
+ compatible = "microchip,mcp9600";
+ reg = <0x65>;
+ };
+
+ temperature-sensor@67 {
+ compatible = "microchip,mcp9600";
+ reg = <0x67>;
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c13mux1ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c13mux1ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ voltage-sensor@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+
+ voltage-sensorr@49 {
+ compatible = "ti,ads7830";
+ reg = <0x49>;
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp175";
+ reg = <0x4a>;
+ };
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp175";
+ reg = <0x4b>;
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c256";
+ reg = <0x56>;
+ };
+ };
+ i2c13mux1ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c13mux1ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+ i2c13mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ potentiometer@2c {
+ compatible = "adi,ad5272-020";
+ reg = <0x2c>;
+ };
+
+ potentiometer@2e {
+ compatible = "adi,ad5272-020";
+ reg = <0x2e>;
+ };
+
+ potentiometer@2f {
+ compatible = "adi,ad5272-020";
+ reg = <0x2f>;
+ };
+
+ power-monitor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+ };
+ i2c13mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ potentiometer@2c {
+ compatible = "adi,ad5272-020";
+ reg = <0x2c>;
+ };
+
+ potentiometer@2e {
+ compatible = "adi,ad5272-020";
+ reg = <0x2e>;
+ };
+
+ potentiometer@2f {
+ compatible = "adi,ad5272-020";
+ reg = <0x2f>;
+ };
+
+ power-monitor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+ };
+ i2c13mux0ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ voltage-sensor@1d {
+ compatible = "ti,adc128d818";
+ reg = <0x1d>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ voltage-sensor@37 {
+ compatible = "ti,adc128d818";
+ reg = <0x37>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ power-monitor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp175";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp175";
+ reg = <0x49>;
+ };
+ };
+ };
};
&i2c14 {
--
2.49.0
next prev parent reply other threads:[~2025-08-14 14:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-14 13:16 [PATCH v2 0/4] Revise Meta Santabarbara devicetree Fred Chen
2025-08-14 13:16 ` Fred Chen [this message]
2025-08-14 13:16 ` [PATCH v2 2/4] ARM: dts: aspeed: santabarbara: Enable MCTP for frontend NIC Fred Chen
2025-08-14 13:16 ` [PATCH v2 3/4] ARM: dts: aspeed: santabarbara: Adjust LED configuration Fred Chen
2025-08-14 13:17 ` [PATCH v2 4/4] ARM: dts: aspeed: santabarbara: add sgpio line name for leak detection Fred Chen
2025-08-15 21:19 ` [PATCH v2 0/4] Revise Meta Santabarbara devicetree Rob Herring (Arm)
2025-09-03 5:16 ` Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250814131706.1567067-2-fredchen.openbmc@gmail.com \
--to=fredchen.openbmc@gmail.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).