From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com,
"Andrew Lunn" <andrew@lunn.ch>,
"Jakub Kicinski" <kuba@kernel.org>,
"Eric Dumazet" <edumazet@google.com>,
"Paolo Abeni" <pabeni@redhat.com>,
"Russell King" <linux@armlinux.org.uk>,
linux-arm-kernel@lists.infradead.org,
"Christophe Leroy" <christophe.leroy@csgroup.eu>,
"Herve Codina" <herve.codina@bootlin.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Vladimir Oltean" <vladimir.oltean@nxp.com>,
"Köry Maincent" <kory.maincent@bootlin.com>,
"Marek Behún" <kabel@kernel.org>,
"Oleksij Rempel" <o.rempel@pengutronix.de>,
"Nicolò Veronese" <nicveronese@gmail.com>,
"Simon Horman" <horms@kernel.org>,
mwojtas@chromium.org, "Antoine Tenart" <atenart@kernel.org>,
devicetree@vger.kernel.org, "Conor Dooley" <conor+dt@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Romain Gantois" <romain.gantois@bootlin.com>,
"Daniel Golle" <daniel@makrotopia.org>,
"Dimitri Fedrau" <dimitri.fedrau@liebherr.com>
Subject: [PATCH net-next v11 09/16] net: phy: marvell-88x2222: Support SFP through phy_port interface
Date: Thu, 14 Aug 2025 15:58:24 +0200 [thread overview]
Message-ID: <20250814135832.174911-10-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20250814135832.174911-1-maxime.chevallier@bootlin.com>
The 88x2222 PHY from Marvell only supports serialised modes as its
line-facing interfaces. Convert that driver to the generic phylib SFP
handling.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
drivers/net/phy/marvell-88x2222.c | 95 +++++++++++++------------------
1 file changed, 38 insertions(+), 57 deletions(-)
diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88x2222.c
index fad2f54c1eac..ba1bbb6c63d6 100644
--- a/drivers/net/phy/marvell-88x2222.c
+++ b/drivers/net/phy/marvell-88x2222.c
@@ -13,7 +13,7 @@
#include <linux/mdio.h>
#include <linux/marvell_phy.h>
#include <linux/of.h>
-#include <linux/sfp.h>
+#include <linux/phy_port.h>
#include <linux/netdevice.h>
/* Port PCS Configuration */
@@ -473,90 +473,70 @@ static int mv2222_config_init(struct phy_device *phydev)
return 0;
}
-static int mv2222_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
+static int mv2222_configure_serdes(struct phy_port *port, bool enable,
+ phy_interface_t interface)
{
- DECLARE_PHY_INTERFACE_MASK(interfaces);
- struct phy_device *phydev = upstream;
- phy_interface_t sfp_interface;
+ struct phy_device *phydev = port_phydev(port);
struct mv2222_data *priv;
- struct device *dev;
- int ret;
-
- __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_supported) = { 0, };
+ int ret = 0;
priv = phydev->priv;
- dev = &phydev->mdio.dev;
-
- sfp_parse_support(phydev->sfp_bus, id, sfp_supported, interfaces);
- phydev->port = sfp_parse_port(phydev->sfp_bus, id, sfp_supported);
- sfp_interface = sfp_select_interface(phydev->sfp_bus, sfp_supported);
-
- dev_info(dev, "%s SFP module inserted\n", phy_modes(sfp_interface));
+ priv->line_interface = interface;
- if (sfp_interface != PHY_INTERFACE_MODE_10GBASER &&
- sfp_interface != PHY_INTERFACE_MODE_1000BASEX &&
- sfp_interface != PHY_INTERFACE_MODE_SGMII) {
- dev_err(dev, "Incompatible SFP module inserted\n");
+ if (enable) {
+ linkmode_and(priv->supported, phydev->supported, port->supported);
- return -EINVAL;
- }
-
- priv->line_interface = sfp_interface;
- linkmode_and(priv->supported, phydev->supported, sfp_supported);
+ ret = mv2222_config_line(phydev);
+ if (ret < 0)
+ return ret;
- ret = mv2222_config_line(phydev);
- if (ret < 0)
- return ret;
+ if (mutex_trylock(&phydev->lock)) {
+ ret = mv2222_config_aneg(phydev);
+ mutex_unlock(&phydev->lock);
+ }
- if (mutex_trylock(&phydev->lock)) {
- ret = mv2222_config_aneg(phydev);
- mutex_unlock(&phydev->lock);
+ } else {
+ linkmode_zero(priv->supported);
}
return ret;
}
-static void mv2222_sfp_remove(void *upstream)
+static void mv2222_port_link_up(struct phy_port *port)
{
- struct phy_device *phydev = upstream;
- struct mv2222_data *priv;
-
- priv = phydev->priv;
-
- priv->line_interface = PHY_INTERFACE_MODE_NA;
- linkmode_zero(priv->supported);
- phydev->port = PORT_NONE;
-}
-
-static void mv2222_sfp_link_up(void *upstream)
-{
- struct phy_device *phydev = upstream;
+ struct phy_device *phydev = port_phydev(port);
struct mv2222_data *priv;
priv = phydev->priv;
priv->sfp_link = true;
}
-static void mv2222_sfp_link_down(void *upstream)
+static void mv2222_port_link_down(struct phy_port *port)
{
- struct phy_device *phydev = upstream;
+ struct phy_device *phydev = port_phydev(port);
struct mv2222_data *priv;
priv = phydev->priv;
priv->sfp_link = false;
}
-static const struct sfp_upstream_ops sfp_phy_ops = {
- .module_insert = mv2222_sfp_insert,
- .module_remove = mv2222_sfp_remove,
- .link_up = mv2222_sfp_link_up,
- .link_down = mv2222_sfp_link_down,
- .attach = phy_sfp_attach,
- .detach = phy_sfp_detach,
- .connect_phy = phy_sfp_connect_phy,
- .disconnect_phy = phy_sfp_disconnect_phy,
+static const struct phy_port_ops mv2222_port_ops = {
+ .link_up = mv2222_port_link_up,
+ .link_down = mv2222_port_link_down,
+ .configure_mii = mv2222_configure_serdes,
};
+static int mv2222_attach_mii_port(struct phy_device *phydev, struct phy_port *port)
+{
+ port->ops = &mv2222_port_ops;
+
+ __set_bit(PHY_INTERFACE_MODE_10GBASER, port->interfaces);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX, port->interfaces);
+ __set_bit(PHY_INTERFACE_MODE_SGMII, port->interfaces);
+
+ return 0;
+}
+
static int mv2222_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
@@ -592,7 +572,7 @@ static int mv2222_probe(struct phy_device *phydev)
priv->line_interface = PHY_INTERFACE_MODE_NA;
phydev->priv = priv;
- return phy_sfp_probe(phydev, &sfp_phy_ops);
+ return 0;
}
static struct phy_driver mv2222_drivers[] = {
@@ -609,6 +589,7 @@ static struct phy_driver mv2222_drivers[] = {
.suspend = mv2222_suspend,
.resume = mv2222_resume,
.read_status = mv2222_read_status,
+ .attach_mii_port = mv2222_attach_mii_port,
},
};
module_phy_driver(mv2222_drivers);
--
2.49.0
next prev parent reply other threads:[~2025-08-14 16:16 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-14 13:58 [PATCH net-next v11 00/16] net: phy: Introduce PHY ports representation Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 01/16] dt-bindings: net: Introduce the ethernet-connector description Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 02/16] net: ethtool: common: Indicate that BaseT works on up to 4 lanes Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 03/16] net: ethtool: Introduce ETHTOOL_LINK_MEDIUM_* values Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 04/16] net: phy: Introduce PHY ports representation Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 05/16] net: phy: dp83822: Add support for phy_port representation Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 06/16] dt-bindings: net: dp83822: Deprecate ti,fiber-mode Maxime Chevallier
2025-08-14 22:34 ` Rob Herring
2025-08-14 13:58 ` [PATCH net-next v11 07/16] net: phy: Create a phy_port for PHY-driven SFPs Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 08/16] net: phy: Introduce generic SFP handling for PHY drivers Maxime Chevallier
2025-08-15 3:25 ` kernel test robot
2025-08-22 9:59 ` Maxime Chevallier
2025-08-27 14:10 ` Simon Horman
2025-08-14 13:58 ` Maxime Chevallier [this message]
2025-08-14 13:58 ` [PATCH net-next v11 10/16] net: phy: marvell: Support SFP through phy_port interface Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 11/16] net: phy: marvell10g: Support SFP through phy_port Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 12/16] net: phy: at803x: Support SFP through phy_port interface Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 13/16] net: phy: qca807x: " Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 14/16] net: phy: Only rely on phy_port for PHY-driven SFP Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 15/16] net: phy: dp83822: Add SFP support through the phy_port interface Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 16/16] Documentation: networking: Document the phy_port infrastructure Maxime Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250814135832.174911-10-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=andrew@lunn.ch \
--cc=atenart@kernel.org \
--cc=christophe.leroy@csgroup.eu \
--cc=conor+dt@kernel.org \
--cc=daniel@makrotopia.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dimitri.fedrau@liebherr.com \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=herve.codina@bootlin.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=kabel@kernel.org \
--cc=kory.maincent@bootlin.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mwojtas@chromium.org \
--cc=netdev@vger.kernel.org \
--cc=nicveronese@gmail.com \
--cc=o.rempel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=romain.gantois@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).