From: Peng Fan <peng.fan@nxp.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>,
Vincent Mailhol <mailhol.vincent@wanadoo.fr>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Aswath Govindraju <a-govindraju@ti.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Frank Li <frank.li@nxp.com>,
Haibo Chen <haibo.chen@nxp.com>
Cc: linux-can@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Peng Fan <peng.fan@nxp.com>
Subject: [PATCH v2 2/5] phy: phy-can-transceiver: Add dual channel support for TJA1048
Date: Mon, 25 Aug 2025 16:36:43 +0800 [thread overview]
Message-ID: <20250825-can-v2-2-c461e9fcbc14@nxp.com> (raw)
In-Reply-To: <20250825-can-v2-0-c461e9fcbc14@nxp.com>
- Introduce new flag CAN_TRANSCEIVER_DUAL_CH to indicate the phy
has two channels.
- Introduce can_transceiver_priv as a higher level encapsulation for
phy, mux_state, num_ch.
- Alloc a phy for each channel
- Support TJA1048 which is a dual high-speed CAN transceiver with
Sleep mode supported.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
drivers/phy/phy-can-transceiver.c | 117 +++++++++++++++++++++++++++-----------
1 file changed, 83 insertions(+), 34 deletions(-)
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index f59caff4b3d4c267feca4220bf1547b6fad08f95..8f0baf0d29536d2b18c5839d6275f020f9af7e45 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c
@@ -17,13 +17,20 @@ struct can_transceiver_data {
u32 flags;
#define CAN_TRANSCEIVER_STB_PRESENT BIT(0)
#define CAN_TRANSCEIVER_EN_PRESENT BIT(1)
+#define CAN_TRANSCEIVER_DUAL_CH BIT(2)
};
struct can_transceiver_phy {
struct phy *generic_phy;
struct gpio_desc *standby_gpio;
struct gpio_desc *enable_gpio;
+ struct can_transceiver_priv *priv;
+};
+
+struct can_transceiver_priv {
+ struct can_transceiver_phy *can_transceiver_phy;
struct mux_state *mux_state;
+ int num_ch;
};
/* Power on function */
@@ -32,8 +39,8 @@ static int can_transceiver_phy_power_on(struct phy *phy)
struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
int ret;
- if (can_transceiver_phy->mux_state) {
- ret = mux_state_select(can_transceiver_phy->mux_state);
+ if (can_transceiver_phy->priv->mux_state) {
+ ret = mux_state_select(can_transceiver_phy->priv->mux_state);
if (ret) {
dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret);
return ret;
@@ -56,8 +63,8 @@ static int can_transceiver_phy_power_off(struct phy *phy)
gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1);
if (can_transceiver_phy->enable_gpio)
gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0);
- if (can_transceiver_phy->mux_state)
- mux_state_deselect(can_transceiver_phy->mux_state);
+ if (can_transceiver_phy->priv->mux_state)
+ mux_state_deselect(can_transceiver_phy->priv->mux_state);
return 0;
}
@@ -76,6 +83,10 @@ static const struct can_transceiver_data tcan1043_drvdata = {
.flags = CAN_TRANSCEIVER_STB_PRESENT | CAN_TRANSCEIVER_EN_PRESENT,
};
+static const struct can_transceiver_data tja1048_drvdata = {
+ .flags = CAN_TRANSCEIVER_STB_PRESENT | CAN_TRANSCEIVER_DUAL_CH,
+};
+
static const struct of_device_id can_transceiver_phy_ids[] = {
{
.compatible = "ti,tcan1042",
@@ -85,6 +96,10 @@ static const struct of_device_id can_transceiver_phy_ids[] = {
.compatible = "ti,tcan1043",
.data = &tcan1043_drvdata
},
+ {
+ .compatible = "nxp,tja1048",
+ .data = &tja1048_drvdata
+ },
{
.compatible = "nxp,tjr1443",
.data = &tcan1043_drvdata
@@ -103,11 +118,27 @@ devm_mux_state_get_optional(struct device *dev, const char *mux_name)
return devm_mux_state_get(dev, mux_name);
}
+static struct phy *can_transceiver_phy_xlate(struct device *dev, const struct of_phandle_args *args)
+{
+ struct can_transceiver_priv *priv = dev_get_drvdata(dev);
+ u32 idx;
+
+ if (priv->num_ch == 1)
+ return priv->can_transceiver_phy[0].generic_phy;
+
+ if (args->args_count != 1)
+ return ERR_PTR(-EINVAL);
+
+ idx = args->args[0];
+
+ return priv->can_transceiver_phy[idx].generic_phy;
+}
+
static int can_transceiver_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
struct device *dev = &pdev->dev;
- struct can_transceiver_phy *can_transceiver_phy;
+ struct can_transceiver_priv *priv;
const struct can_transceiver_data *drvdata;
const struct of_device_id *match;
struct phy *phy;
@@ -115,52 +146,70 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
struct gpio_desc *enable_gpio;
struct mux_state *mux_state;
u32 max_bitrate = 0;
- int err;
-
- can_transceiver_phy = devm_kzalloc(dev, sizeof(struct can_transceiver_phy), GFP_KERNEL);
- if (!can_transceiver_phy)
- return -ENOMEM;
+ int num_ch = 1;
+ int err, i;
match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node);
drvdata = match->data;
+ priv = devm_kzalloc(dev, sizeof(struct can_transceiver_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, priv);
+
+ if (drvdata->flags & CAN_TRANSCEIVER_DUAL_CH)
+ num_ch = 2;
+
+ priv->num_ch = num_ch;
+ priv->can_transceiver_phy = devm_kcalloc(dev, num_ch, sizeof(struct can_transceiver_phy),
+ GFP_KERNEL);
+ if (!priv->can_transceiver_phy)
+ return -ENOMEM;
+
mux_state = devm_mux_state_get_optional(dev, NULL);
if (IS_ERR(mux_state))
return PTR_ERR(mux_state);
- can_transceiver_phy->mux_state = mux_state;
-
- phy = devm_phy_create(dev, dev->of_node,
- &can_transceiver_phy_ops);
- if (IS_ERR(phy)) {
- dev_err(dev, "failed to create can transceiver phy\n");
- return PTR_ERR(phy);
- }
+ priv->mux_state = mux_state;
err = device_property_read_u32(dev, "max-bitrate", &max_bitrate);
if ((err != -EINVAL) && !max_bitrate)
dev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit\n");
- phy->attrs.max_link_rate = max_bitrate;
- can_transceiver_phy->generic_phy = phy;
+ for (i = 0; i < num_ch; i++) {
+ phy = devm_phy_create(dev, dev->of_node, &can_transceiver_phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create can transceiver phy\n");
+ return PTR_ERR(phy);
+ }
- if (drvdata->flags & CAN_TRANSCEIVER_STB_PRESENT) {
- standby_gpio = devm_gpiod_get_optional(dev, "standby", GPIOD_OUT_HIGH);
- if (IS_ERR(standby_gpio))
- return PTR_ERR(standby_gpio);
- can_transceiver_phy->standby_gpio = standby_gpio;
- }
+ phy->attrs.max_link_rate = max_bitrate;
- if (drvdata->flags & CAN_TRANSCEIVER_EN_PRESENT) {
- enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
- if (IS_ERR(enable_gpio))
- return PTR_ERR(enable_gpio);
- can_transceiver_phy->enable_gpio = enable_gpio;
- }
+ priv->can_transceiver_phy[i].generic_phy = phy;
+ priv->can_transceiver_phy[i].priv = priv;
+
+ if (drvdata->flags & CAN_TRANSCEIVER_STB_PRESENT) {
+ standby_gpio = devm_gpiod_get_index_optional(dev, "standby", i,
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(standby_gpio))
+ return PTR_ERR(standby_gpio);
+ priv->can_transceiver_phy[i].standby_gpio = standby_gpio;
+ }
+
+ if (drvdata->flags & CAN_TRANSCEIVER_EN_PRESENT) {
+ enable_gpio = devm_gpiod_get_index_optional(dev, "enable", i,
+ GPIOD_OUT_LOW);
+ if (IS_ERR(enable_gpio))
+ return PTR_ERR(enable_gpio);
+ priv->can_transceiver_phy[i].enable_gpio = enable_gpio;
+ }
- phy_set_drvdata(can_transceiver_phy->generic_phy, can_transceiver_phy);
+ phy_set_drvdata(priv->can_transceiver_phy[i].generic_phy,
+ &priv->can_transceiver_phy[i]);
+ }
- phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ phy_provider = devm_of_phy_provider_register(dev, can_transceiver_phy_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
--
2.37.1
next prev parent reply other threads:[~2025-08-25 9:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-25 8:36 [PATCH v2 0/5] phy: phy-can-transceiver: Support TJA1048/TJA1051 Peng Fan
2025-08-25 8:36 ` [PATCH v2 1/5] dt-bindings: phy: ti,tcan104x-can: Document NXP TJA1051/1048 Peng Fan
2025-08-25 15:39 ` Frank Li
2025-08-25 8:36 ` Peng Fan [this message]
2025-08-25 15:52 ` [PATCH v2 2/5] phy: phy-can-transceiver: Add dual channel support for TJA1048 Frank Li
2025-08-25 8:36 ` [PATCH v2 3/5] arm64: dts: imx95-15x15-evk: Use phys to replace xceiver-supply Peng Fan
2025-08-25 15:53 ` Frank Li
2025-08-26 2:19 ` Sherry Sun
2025-08-26 2:28 ` Bough Chen
2025-08-25 8:36 ` [PATCH v2 4/5] arm64: dts: imx8mp-evk: " Peng Fan
2025-08-25 15:55 ` Frank Li
2025-08-25 8:36 ` [PATCH v2 5/5] arm64: dts: imx93-11x11-evk: " Peng Fan
2025-08-25 15:58 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250825-can-v2-2-c461e9fcbc14@nxp.com \
--to=peng.fan@nxp.com \
--cc=a-govindraju@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=frank.li@nxp.com \
--cc=haibo.chen@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=mailhol.vincent@wanadoo.fr \
--cc=mkl@pengutronix.de \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).