[PATCH v3 2/4] media: imx8mq-mipi-csi2: Use devm_clk_bulk_get_all() to fetch clocks

[Guoniu Zhou <guoniu.zhou@nxp.com>]

Use devm_clk_bulk_get_all() helper to simplify clock handle code.

No functional changes intended.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
---
 drivers/media/platform/nxp/imx8mq-mipi-csi2.c | 52 ++++++++-------------------
 1 file changed, 15 insertions(+), 37 deletions(-)

diff --git a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
index 3a4645f59a44028fdca82a4d8393e1a0a6ba88f0..2bf11984690af2e687a3217e465697333d9d995d 100644
--- a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
+++ b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
@@ -71,21 +71,6 @@ enum {
 	ST_SUSPENDED	= 4,
 };
 
-enum imx8mq_mipi_csi_clk {
-	CSI2_CLK_CORE,
-	CSI2_CLK_ESC,
-	CSI2_CLK_UI,
-	CSI2_NUM_CLKS,
-};
-
-static const char * const imx8mq_mipi_csi_clk_id[CSI2_NUM_CLKS] = {
-	[CSI2_CLK_CORE] = "core",
-	[CSI2_CLK_ESC] = "esc",
-	[CSI2_CLK_UI] = "ui",
-};
-
-#define CSI2_NUM_CLKS	ARRAY_SIZE(imx8mq_mipi_csi_clk_id)
-
 struct imx8mq_plat_data {
 	int (*enable)(struct csi_state *state, u32 hs_settle);
 	void (*disable)(struct csi_state *state);
@@ -111,7 +96,8 @@ struct csi_state {
 	struct device *dev;
 	const struct imx8mq_plat_data *pdata;
 	void __iomem *regs;
-	struct clk_bulk_data clks[CSI2_NUM_CLKS];
+	struct clk_bulk_data *clks;
+	int num_clks;
 	struct reset_control *rst;
 	struct regulator *mipi_phy_regulator;
 
@@ -384,24 +370,16 @@ static void imx8mq_mipi_csi_set_params(struct csi_state *state)
 			      CSI2RX_SEND_LEVEL);
 }
 
-static int imx8mq_mipi_csi_clk_enable(struct csi_state *state)
-{
-	return clk_bulk_prepare_enable(CSI2_NUM_CLKS, state->clks);
-}
-
-static void imx8mq_mipi_csi_clk_disable(struct csi_state *state)
+static struct clk *find_esc_clk(struct csi_state *state)
 {
-	clk_bulk_disable_unprepare(CSI2_NUM_CLKS, state->clks);
-}
-
-static int imx8mq_mipi_csi_clk_get(struct csi_state *state)
-{
-	unsigned int i;
+	int i;
 
-	for (i = 0; i < CSI2_NUM_CLKS; i++)
-		state->clks[i].id = imx8mq_mipi_csi_clk_id[i];
+	for (i = 0; i < state->num_clks; i++) {
+		if (!strcmp(state->clks[i].id, "esc"))
+			return state->clks[i].clk;
+	}
 
-	return devm_clk_bulk_get(state->dev, CSI2_NUM_CLKS, state->clks);
+	return NULL;
 }
 
 static int imx8mq_mipi_csi_calc_hs_settle(struct csi_state *state,
@@ -456,7 +434,7 @@ static int imx8mq_mipi_csi_calc_hs_settle(struct csi_state *state,
 	 * documentation recommends picking a value away from the boundaries.
 	 * Let's pick the average.
 	 */
-	esc_clk_rate = clk_get_rate(state->clks[CSI2_CLK_ESC].clk);
+	esc_clk_rate = clk_get_rate(find_esc_clk(state));
 	if (!esc_clk_rate) {
 		dev_err(state->dev, "Could not get esc clock rate.\n");
 		return -EINVAL;
@@ -783,7 +761,7 @@ static void imx8mq_mipi_csi_pm_suspend(struct device *dev)
 
 	if (state->state & ST_POWERED) {
 		imx8mq_mipi_csi_stop_stream(state);
-		imx8mq_mipi_csi_clk_disable(state);
+		clk_bulk_disable_unprepare(state->num_clks, state->clks);
 		state->state &= ~ST_POWERED;
 	}
 
@@ -801,7 +779,7 @@ static int imx8mq_mipi_csi_pm_resume(struct device *dev)
 
 	if (!(state->state & ST_POWERED)) {
 		state->state |= ST_POWERED;
-		ret = imx8mq_mipi_csi_clk_enable(state);
+		ret = clk_bulk_prepare_enable(state->num_clks, state->clks);
 	}
 	if (state->state & ST_STREAMING) {
 		sd_state = v4l2_subdev_lock_and_get_active_state(sd);
@@ -1027,9 +1005,9 @@ static int imx8mq_mipi_csi_probe(struct platform_device *pdev)
 	if (IS_ERR(state->regs))
 		return PTR_ERR(state->regs);
 
-	ret = imx8mq_mipi_csi_clk_get(state);
-	if (ret < 0)
-		return ret;
+	state->num_clks = devm_clk_bulk_get_all(dev, &state->clks);
+	if (state->num_clks < 0)
+		return dev_err_probe(dev, state->num_clks, "Failed to get clocks\n");
 
 	platform_set_drvdata(pdev, &state->sd);
 

-- 
2.34.1