[PATCH 0/8] arm64: allwinner: a523: Enable MCU PRCM and NPU

[PATCH 0/8] arm64: allwinner: a523: Enable MCU PRCM and NPU

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens@csie.org>

Hi folks,

This series adds support for the MCU PRCM and the NPU.

The MCU PRCM is a Power, Reset & Clock Management block that has some
clock and reset controls for the MCU, DSP and some peripherals that the
MCU could use.

The NPU is a Vivante IP block. It is clocked from the NPU PLL from the
main clock unit, but the bus clock and reset controls lie in the MCU
PRCM.

Patch 1 adds the missing NPU module clock to the main clock control
unit's binding.

Patch 2 adds the binding for the MCU PRCM clock control unit

Patch 3 fixes clock rate readback for the new dual-divider type added
with the A523 family.

Patch 4 adds the missing NPU module clock.

Patch 5 adds support for power-of-two dividers to the sunxi-ng clk
library.

Patch 6 adds a new driver for the A523 MCU PRCM CCU.

Patch 7 adds a device node for the MCU PRCM CCU.

Patch 8 adds a device node for the NPU.

The NPU was only lightly tested: the driver correctly probes and detects
a model GC9000, revision 9003.

Please have a look. All patches will be merged through the sunxi tree.


Thanks
ChenYu


Chen-Yu Tsai (8):
  dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock
  dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller
  clk: sunxi-ng: mp: Fix dual-divider clock rate readback
  clk: sunxi-ng: sun55i-a523-ccu: Add missing NPU module clock
  clk: sunxi-ng: div: support power-of-two dividers
  clk: sunxi-ng: add support for the A523/T527 MCU CCU
  arm64: dts: allwinner: a523: Add MCU PRCM CCU node
  arm64: dts: allwinner: a523: Add NPU device node

 .../clock/allwinner,sun55i-a523-ccu.yaml      |  35 +-
 .../arm64/boot/dts/allwinner/sun55i-a523.dtsi |  37 ++
 drivers/clk/sunxi-ng/Kconfig                  |   5 +
 drivers/clk/sunxi-ng/Makefile                 |   2 +
 drivers/clk/sunxi-ng/ccu-sun55i-a523-mcu.c    | 447 ++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun55i-a523.c        |  21 +-
 drivers/clk/sunxi-ng/ccu-sun55i-a523.h        |  14 -
 drivers/clk/sunxi-ng/ccu_div.h                |  18 +
 drivers/clk/sunxi-ng/ccu_mp.c                 |   2 +-
 include/dt-bindings/clock/sun55i-a523-ccu.h   |   1 +
 .../dt-bindings/clock/sun55i-a523-mcu-ccu.h   |  54 +++
 .../dt-bindings/reset/sun55i-a523-mcu-ccu.h   |  30 ++
 12 files changed, 646 insertions(+), 20 deletions(-)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun55i-a523-mcu.c
 delete mode 100644 drivers/clk/sunxi-ng/ccu-sun55i-a523.h
 create mode 100644 include/dt-bindings/clock/sun55i-a523-mcu-ccu.h
 create mode 100644 include/dt-bindings/reset/sun55i-a523-mcu-ccu.h

-- 
2.39.5

[PATCH 1/8] dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens@csie.org>

The main clock controller on the A523/T527 has the NPU's module clock.
It was missing from the original submission, likely because that was
based on the A523 user manual; the A523 is marketed without the NPU.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 include/dt-bindings/clock/sun55i-a523-ccu.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/clock/sun55i-a523-ccu.h b/include/dt-bindings/clock/sun55i-a523-ccu.h
index c8259ac5ada7..54808fcfd556 100644
--- a/include/dt-bindings/clock/sun55i-a523-ccu.h
+++ b/include/dt-bindings/clock/sun55i-a523-ccu.h
@@ -185,5 +185,6 @@
 #define CLK_FANOUT0		176
 #define CLK_FANOUT1		177
 #define CLK_FANOUT2		178
+#define CLK_NPU			179
 
 #endif /* _DT_BINDINGS_CLK_SUN55I_A523_CCU_H_ */
-- 
2.39.5

Re: [PATCH 1/8] dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock

[Rob Herring (Arm)]

On Sun, 31 Aug 2025 01:08:54 +0800, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <wens@csie.org>
> 
> The main clock controller on the A523/T527 has the NPU's module clock.
> It was missing from the original submission, likely because that was
> based on the A523 user manual; the A523 is marketed without the NPU.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  include/dt-bindings/clock/sun55i-a523-ccu.h | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH 2/8] dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens@csie.org>

There are four clock controllers in the A523 SoC. The existing binding
already covers two of them that are critical for basic operation. The
remaining ones are the MCU clock controller and CPU PLL clock
controller.

Add a description for the MCU CCU. This unit controls and provides
clocks to the MCU (RISC-V) subsystem and peripherals meant to operate
under low power conditions.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 .../clock/allwinner,sun55i-a523-ccu.yaml      | 35 +++++++++++-
 .../dt-bindings/clock/sun55i-a523-mcu-ccu.h   | 54 +++++++++++++++++++
 .../dt-bindings/reset/sun55i-a523-mcu-ccu.h   | 30 +++++++++++
 3 files changed, 117 insertions(+), 2 deletions(-)
 create mode 100644 include/dt-bindings/clock/sun55i-a523-mcu-ccu.h
 create mode 100644 include/dt-bindings/reset/sun55i-a523-mcu-ccu.h

diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml
index f5f62e9a10a1..1dbd92febc47 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml
@@ -19,6 +19,7 @@ properties:
   compatible:
     enum:
       - allwinner,sun55i-a523-ccu
+      - allwinner,sun55i-a523-mcu-ccu
       - allwinner,sun55i-a523-r-ccu
 
   reg:
@@ -26,11 +27,11 @@ properties:
 
   clocks:
     minItems: 4
-    maxItems: 5
+    maxItems: 8
 
   clock-names:
     minItems: 4
-    maxItems: 5
+    maxItems: 8
 
 required:
   - "#clock-cells"
@@ -63,6 +64,36 @@ allOf:
             - const: iosc
             - const: losc-fanout
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun55i-a523-mcu-ccu
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: High Frequency Oscillator (usually at 24MHz)
+            - description: Low Frequency Oscillator (usually at 32kHz)
+            - description: Internal Oscillator
+            - description: Audio PLL (4x)
+            - description: Peripherals PLL 0 (300 MHz output)
+            - description: DSP module clock
+            - description: PRCM AHB clock
+            - description: MBUS clock
+
+        clock-names:
+          items:
+            - const: hosc
+            - const: losc
+            - const: iosc
+            - const: pll-audio0-4x
+            - const: pll-periph0-300m
+            - const: dsp
+            - const: r-ahb
+            - const: mbus
+
   - if:
       properties:
         compatible:
diff --git a/include/dt-bindings/clock/sun55i-a523-mcu-ccu.h b/include/dt-bindings/clock/sun55i-a523-mcu-ccu.h
new file mode 100644
index 000000000000..6efc6bc7e11a
--- /dev/null
+++ b/include/dt-bindings/clock/sun55i-a523-mcu-ccu.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (C) 2025 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN55I_A523_MCU_CCU_H_
+#define _DT_BINDINGS_CLK_SUN55I_A523_MCU_CCU_H_
+
+#define CLK_MCU_PLL_AUDIO1	0
+#define CLK_MCU_PLL_AUDIO1_DIV2	1
+#define CLK_MCU_PLL_AUDIO1_DIV5	2
+#define CLK_MCU_AUDIO_OUT	3
+#define CLK_MCU_DSP		4
+#define CLK_MCU_I2S0		5
+#define CLK_MCU_I2S1		6
+#define CLK_MCU_I2S2		7
+#define CLK_MCU_I2S3		8
+#define CLK_MCU_I2S3_ASRC	9
+#define CLK_BUS_MCU_I2S0	10
+#define CLK_BUS_MCU_I2S1	11
+#define CLK_BUS_MCU_I2S2	12
+#define CLK_BUS_MCU_I2S3	13
+#define CLK_MCU_SPDIF_TX	14
+#define CLK_MCU_SPDIF_RX	15
+#define CLK_BUS_MCU_SPDIF	16
+#define CLK_MCU_DMIC		17
+#define CLK_BUS_MCU_DMIC	18
+#define CLK_MCU_AUDIO_CODEC_DAC	19
+#define CLK_MCU_AUDIO_CODEC_ADC	20
+#define CLK_BUS_MCU_AUDIO_CODEC	21
+#define CLK_BUS_MCU_DSP_MSGBOX	22
+#define CLK_BUS_MCU_DSP_CFG	23
+#define CLK_BUS_MCU_NPU_HCLK	24
+#define CLK_BUS_MCU_NPU_ACLK	25
+#define CLK_MCU_TIMER0		26
+#define CLK_MCU_TIMER1		27
+#define CLK_MCU_TIMER2		28
+#define CLK_MCU_TIMER3		29
+#define CLK_MCU_TIMER4		30
+#define CLK_MCU_TIMER5		31
+#define CLK_BUS_MCU_TIMER	32
+#define CLK_BUS_MCU_DMA		33
+#define CLK_MCU_TZMA0		34
+#define CLK_MCU_TZMA1		35
+#define CLK_BUS_MCU_PUBSRAM	36
+#define CLK_MCU_MBUS_DMA	37
+#define CLK_MCU_MBUS		38
+#define CLK_MCU_RISCV		39
+#define CLK_BUS_MCU_RISCV_CFG	40
+#define CLK_BUS_MCU_RISCV_MSGBOX	41
+#define CLK_MCU_PWM0		42
+#define CLK_BUS_MCU_PWM0	43
+
+#endif /* _DT_BINDINGS_CLK_SUN55I_A523_MCU_CCU_H_ */
diff --git a/include/dt-bindings/reset/sun55i-a523-mcu-ccu.h b/include/dt-bindings/reset/sun55i-a523-mcu-ccu.h
new file mode 100644
index 000000000000..a89a0b44f08b
--- /dev/null
+++ b/include/dt-bindings/reset/sun55i-a523-mcu-ccu.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (C) 2025 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN55I_A523_MCU_CCU_H_
+#define _DT_BINDINGS_RST_SUN55I_A523_MCU_CCU_H_
+
+#define RST_BUS_MCU_I2S0		0
+#define RST_BUS_MCU_I2S1		1
+#define RST_BUS_MCU_I2S2		2
+#define RST_BUS_MCU_I2S3		3
+#define RST_BUS_MCU_SPDIF		4
+#define RST_BUS_MCU_DMIC		5
+#define RST_BUS_MCU_AUDIO_CODEC		6
+#define RST_BUS_MCU_DSP_MSGBOX		7
+#define RST_BUS_MCU_DSP_CFG		8
+#define RST_BUS_MCU_NPU			9
+#define RST_BUS_MCU_TIMER		10
+#define RST_BUS_MCU_DSP_DEBUG		11
+#define RST_BUS_MCU_DSP			12
+#define RST_BUS_MCU_DMA			13
+#define RST_BUS_MCU_PUBSRAM		14
+#define RST_BUS_MCU_RISCV_CFG		15
+#define RST_BUS_MCU_RISCV_DEBUG		16
+#define RST_BUS_MCU_RISCV_CORE		17
+#define RST_BUS_MCU_RISCV_MSGBOX	18
+#define RST_BUS_MCU_PWM0		19
+
+#endif /* _DT_BINDINGS_RST_SUN55I_A523_MCU_CCU_H_ */
-- 
2.39.5

Re: [PATCH 2/8] dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller

[Rob Herring (Arm)]

On Sun, 31 Aug 2025 01:08:55 +0800, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <wens@csie.org>
> 
> There are four clock controllers in the A523 SoC. The existing binding
> already covers two of them that are critical for basic operation. The
> remaining ones are the MCU clock controller and CPU PLL clock
> controller.
> 
> Add a description for the MCU CCU. This unit controls and provides
> clocks to the MCU (RISC-V) subsystem and peripherals meant to operate
> under low power conditions.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  .../clock/allwinner,sun55i-a523-ccu.yaml      | 35 +++++++++++-
>  .../dt-bindings/clock/sun55i-a523-mcu-ccu.h   | 54 +++++++++++++++++++
>  .../dt-bindings/reset/sun55i-a523-mcu-ccu.h   | 30 +++++++++++
>  3 files changed, 117 insertions(+), 2 deletions(-)
>  create mode 100644 include/dt-bindings/clock/sun55i-a523-mcu-ccu.h
>  create mode 100644 include/dt-bindings/reset/sun55i-a523-mcu-ccu.h
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH 3/8] clk: sunxi-ng: mp: Fix dual-divider clock rate readback

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens@csie.org>

When dual-divider clock support was introduced, the P divider offset was
left out of the .recalc_rate readback function. This causes the clock
rate to become bogus or even zero (possibly due to the P divider being
1, leading to a divide-by-zero).

Fix this by incorporating the P divider offset into the calculation.

Fixes: 45717804b75e ("clk: sunxi-ng: mp: introduce dual-divider clock")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/ccu_mp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu_mp.c b/drivers/clk/sunxi-ng/ccu_mp.c
index 354c981943b6..4221b1888b38 100644
--- a/drivers/clk/sunxi-ng/ccu_mp.c
+++ b/drivers/clk/sunxi-ng/ccu_mp.c
@@ -185,7 +185,7 @@ static unsigned long ccu_mp_recalc_rate(struct clk_hw *hw,
 	p &= (1 << cmp->p.width) - 1;
 
 	if (cmp->common.features & CCU_FEATURE_DUAL_DIV)
-		rate = (parent_rate / p) / m;
+		rate = (parent_rate / (p + cmp->p.offset)) / m;
 	else
 		rate = (parent_rate >> p) / m;
 
-- 
2.39.5

[PATCH 4/8] clk: sunxi-ng: sun55i-a523-ccu: Add missing NPU module clock

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens@csie.org>

The main clock controller on the A523/T527 has the NPU's module clock.
It was missing from the original submission, likely because that was
based on the A523 user manual; the A523 is marketed without the NPU.

Also, merge the private header back into the driver code itself. The
header only contains a macro containing the total number of clocks.
This has to be updated every time a missing clock gets added. Having
it in a separate file doesn't help the process. Instead just drop the
macro, and thus the header no longer has any reason to exist.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/ccu-sun55i-a523.c | 21 ++++++++++++++++++---
 drivers/clk/sunxi-ng/ccu-sun55i-a523.h | 14 --------------
 2 files changed, 18 insertions(+), 17 deletions(-)
 delete mode 100644 drivers/clk/sunxi-ng/ccu-sun55i-a523.h

diff --git a/drivers/clk/sunxi-ng/ccu-sun55i-a523.c b/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
index 1a9a1cb869e2..88405b624dc5 100644
--- a/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
+++ b/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
@@ -11,6 +11,9 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
+#include <dt-bindings/clock/sun55i-a523-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-ccu.h>
+
 #include "../clk.h"
 
 #include "ccu_common.h"
@@ -25,8 +28,6 @@
 #include "ccu_nkmp.h"
 #include "ccu_nm.h"
 
-#include "ccu-sun55i-a523.h"
-
 /*
  * The 24 MHz oscillator, the root of most of the clock tree.
  * .fw_name is the string used in the DT "clock-names" property, used to
@@ -486,6 +487,18 @@ static SUNXI_CCU_M_HW_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
 
 static SUNXI_CCU_GATE_HWS(bus_ve_clk, "bus-ve", ahb_hws, 0x69c, BIT(0), 0);
 
+static const struct clk_hw *npu_parents[] = {
+	&pll_periph0_480M_clk.common.hw,
+	&pll_periph0_600M_clk.hw,
+	&pll_periph0_800M_clk.common.hw,
+	&pll_npu_2x_clk.hw,
+};
+static SUNXI_CCU_M_HW_WITH_MUX_GATE(npu_clk, "npu", npu_parents, 0x6e0,
+				    0, 5,	/* M */
+				    24, 3,	/* mux */
+				    BIT(31),	/* gate */
+				    CLK_SET_RATE_PARENT);
+
 static SUNXI_CCU_GATE_HWS(bus_dma_clk, "bus-dma", ahb_hws, 0x70c, BIT(0), 0);
 
 static SUNXI_CCU_GATE_HWS(bus_msgbox_clk, "bus-msgbox", ahb_hws, 0x71c,
@@ -1217,6 +1230,7 @@ static struct ccu_common *sun55i_a523_ccu_clks[] = {
 	&bus_ce_sys_clk.common,
 	&ve_clk.common,
 	&bus_ve_clk.common,
+	&npu_clk.common,
 	&bus_dma_clk.common,
 	&bus_msgbox_clk.common,
 	&bus_spinlock_clk.common,
@@ -1343,7 +1357,7 @@ static struct ccu_common *sun55i_a523_ccu_clks[] = {
 };
 
 static struct clk_hw_onecell_data sun55i_a523_hw_clks = {
-	.num	= CLK_NUMBER,
+	.num	= CLK_NPU + 1,
 	.hws	= {
 		[CLK_PLL_DDR0]		= &pll_ddr_clk.common.hw,
 		[CLK_PLL_PERIPH0_4X]	= &pll_periph0_4x_clk.common.hw,
@@ -1524,6 +1538,7 @@ static struct clk_hw_onecell_data sun55i_a523_hw_clks = {
 		[CLK_FANOUT0]		= &fanout0_clk.common.hw,
 		[CLK_FANOUT1]		= &fanout1_clk.common.hw,
 		[CLK_FANOUT2]		= &fanout2_clk.common.hw,
+		[CLK_NPU]		= &npu_clk.common.hw,
 	},
 };
 
diff --git a/drivers/clk/sunxi-ng/ccu-sun55i-a523.h b/drivers/clk/sunxi-ng/ccu-sun55i-a523.h
deleted file mode 100644
index fc8dd42f1b47..000000000000
--- a/drivers/clk/sunxi-ng/ccu-sun55i-a523.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2024 Arm Ltd.
- */
-
-#ifndef _CCU_SUN55I_A523_H
-#define _CCU_SUN55I_A523_H
-
-#include <dt-bindings/clock/sun55i-a523-ccu.h>
-#include <dt-bindings/reset/sun55i-a523-ccu.h>
-
-#define CLK_NUMBER	(CLK_FANOUT2 + 1)
-
-#endif /* _CCU_SUN55I_A523_H */
-- 
2.39.5

[PATCH 5/8] clk: sunxi-ng: div: support power-of-two dividers

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens@csie.org>

Some clocks (for timers) on the A523 are mux-divider-gate types
with the divider being values of power-of-two.

Add a macro for these types of clocks so that we can use the divider
types instead of the M-P types without an M divider.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/ccu_div.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
index 90d49ee8e0cc..be00b3277e97 100644
--- a/drivers/clk/sunxi-ng/ccu_div.h
+++ b/drivers/clk/sunxi-ng/ccu_div.h
@@ -274,6 +274,24 @@ struct ccu_div {
 	SUNXI_CCU_M_HWS_WITH_GATE(_struct, _name, _parent, _reg,	\
 				  _mshift, _mwidth, 0, _flags)
 
+#define SUNXI_CCU_P_DATA_WITH_MUX_GATE(_struct, _name, _parents, _reg,	\
+				       _mshift, _mwidth,		\
+				       _muxshift, _muxwidth,		\
+				       _gate, _flags)			\
+	struct ccu_div _struct = {					\
+		.enable	= _gate,					\
+		.div	= _SUNXI_CCU_DIV_FLAGS(_mshift, _mwidth,	\
+					       CLK_DIVIDER_POWER_OF_TWO), \
+		.mux	= _SUNXI_CCU_MUX(_muxshift, _muxwidth),		\
+		.common	= {						\
+			.reg		= _reg,				\
+			.hw.init	= CLK_HW_INIT_PARENTS_DATA(_name, \
+								   _parents, \
+								   &ccu_div_ops, \
+								   _flags), \
+		},							\
+	}
+
 static inline struct ccu_div *hw_to_ccu_div(struct clk_hw *hw)
 {
 	struct ccu_common *common = hw_to_ccu_common(hw);
-- 
2.39.5

[PATCH 6/8] clk: sunxi-ng: add support for the A523/T527 MCU CCU

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens@csie.org>

The A523/T527 SoCs have a new MCU PRCM, which has more clocks and reset
controls for the RISC-V MCU and other peripherals. There is no visible
bus in this part, but there is a second audio PLL. The BSP driver uses
the 24MHz main oscillator as the parent for all the bus clocks.

Add a driver to support this part. Unlike the BSP driver, the SoC's main
MBUS clock is chosen as the parent for the MCU MBUS clock, and the
latter then serves as the parent of the MCU DMA controller's MBUS clock.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/Kconfig               |   5 +
 drivers/clk/sunxi-ng/Makefile              |   2 +
 drivers/clk/sunxi-ng/ccu-sun55i-a523-mcu.c | 447 +++++++++++++++++++++
 3 files changed, 454 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun55i-a523-mcu.c

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 8896fd052ef1..6af2d020e03e 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -57,6 +57,11 @@ config SUN55I_A523_CCU
 	default ARCH_SUNXI
 	depends on ARM64 || COMPILE_TEST
 
+config SUN55I_A523_MCU_CCU
+	tristate "Support for the Allwinner A523/T527 MCU CCU"
+	default ARCH_SUNXI
+	depends on ARM64 || COMPILE_TEST
+
 config SUN55I_A523_R_CCU
 	tristate "Support for the Allwinner A523/T527 PRCM CCU"
 	default ARCH_SUNXI
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 82e471036de6..a1c4087d7241 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_SUN50I_H6_CCU)	+= sun50i-h6-ccu.o
 obj-$(CONFIG_SUN50I_H6_R_CCU)	+= sun50i-h6-r-ccu.o
 obj-$(CONFIG_SUN50I_H616_CCU)	+= sun50i-h616-ccu.o
 obj-$(CONFIG_SUN55I_A523_CCU)	+= sun55i-a523-ccu.o
+obj-$(CONFIG_SUN55I_A523_MCU_CCU)	+= sun55i-a523-mcu-ccu.o
 obj-$(CONFIG_SUN55I_A523_R_CCU)	+= sun55i-a523-r-ccu.o
 obj-$(CONFIG_SUN4I_A10_CCU)	+= sun4i-a10-ccu.o
 obj-$(CONFIG_SUN5I_CCU)		+= sun5i-ccu.o
@@ -61,6 +62,7 @@ sun50i-h6-ccu-y			+= ccu-sun50i-h6.o
 sun50i-h6-r-ccu-y		+= ccu-sun50i-h6-r.o
 sun50i-h616-ccu-y		+= ccu-sun50i-h616.o
 sun55i-a523-ccu-y		+= ccu-sun55i-a523.o
+sun55i-a523-mcu-ccu-y		+= ccu-sun55i-a523-mcu.o
 sun55i-a523-r-ccu-y		+= ccu-sun55i-a523-r.o
 sun4i-a10-ccu-y			+= ccu-sun4i-a10.o
 sun5i-ccu-y			+= ccu-sun5i.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun55i-a523-mcu.c b/drivers/clk/sunxi-ng/ccu-sun55i-a523-mcu.c
new file mode 100644
index 000000000000..6105485837c9
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun55i-a523-mcu.c
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Chen-Yu Tsai <wens@csie.org>
+ *
+ * Based on the A523 CCU driver:
+ *   Copyright (C) 2023-2024 Arm Ltd.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/sun55i-a523-mcu-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-mcu-ccu.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nm.h"
+
+static const struct clk_parent_data osc24M[] = {
+	{ .fw_name = "hosc" }
+};
+
+#define SUN55I_A523_PLL_AUDIO1_REG	0x00c
+static struct ccu_sdm_setting pll_audio1_sdm_table[] = {
+	{ .rate = 2167603200, .pattern = 0xa000a234, .m = 1, .n = 90 }, /* div2->22.5792 */
+	{ .rate = 2359296000, .pattern = 0xa0009ba6, .m = 1, .n = 98 }, /* div2->24.576 */
+	{ .rate = 1806336000, .pattern = 0xa000872b, .m = 1, .n = 75 }, /* div5->22.576 */
+};
+
+static struct ccu_nm pll_audio1_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 11),
+	.m		= _SUNXI_CCU_DIV(1, 1),
+	.sdm		= _SUNXI_CCU_SDM(pll_audio1_sdm_table, BIT(24),
+					 0x010, BIT(31)),
+	.min_rate	= 180000000U,
+	.max_rate	= 3500000000U,
+	.common		= {
+		.reg		= 0x00c,
+		.features	= CCU_FEATURE_SIGMA_DELTA_MOD,
+		.hw.init	= CLK_HW_INIT_PARENTS_DATA("pll-audio1",
+							   osc24M, &ccu_nm_ops,
+							   CLK_SET_RATE_GATE),
+	},
+};
+
+static const struct clk_hw *pll_audio1_div_parents[] = { &pll_audio1_clk.common.hw };
+static CLK_FIXED_FACTOR_HWS(pll_periph1_div2_clk, "pll-audio1-div2",
+			    pll_audio1_div_parents, 2, 1,
+			    CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_periph1_div5_clk, "pll-audio1-div5",
+			    pll_audio1_div_parents, 5, 1,
+			    CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(audio_out_clk, "audio-out",
+			     "pll-audio1-div2", 0x01c,
+			     0, 5, BIT(31), CLK_SET_RATE_PARENT);
+
+static const struct clk_parent_data dsp_parents[] = {
+	{ .fw_name = "hosc" },
+	{ .fw_name = "losc" },
+	{ .fw_name = "iosc" },
+	{ .hw = &pll_periph1_div5_clk.hw },
+	{ .hw = &pll_periph1_div2_clk.hw },
+	{ .fw_name = "dsp" },
+};
+static SUNXI_CCU_M_DATA_WITH_MUX_GATE(dsp_clk, "mcu-dsp", dsp_parents, 0x0020,
+				      0, 5,	/* M */
+				      24, 3,	/* mux */
+				      BIT(31),	/* gate */
+				      0);
+
+static const struct clk_parent_data i2s_parents[] = {
+	{ .fw_name = "pll-audio0-4x" },
+	{ .hw = &pll_periph1_div2_clk.hw },
+	{ .hw = &pll_periph1_div5_clk.hw },
+};
+
+static SUNXI_CCU_DUALDIV_MUX_GATE(i2s0_clk, "i2s0", i2s_parents, 0x02c,
+				  0, 5,		/* M */
+				  5, 5,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_SET_RATE_PARENT);
+static SUNXI_CCU_DUALDIV_MUX_GATE(i2s1_clk, "i2s1", i2s_parents, 0x030,
+				  0, 5,		/* M */
+				  5, 5,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_SET_RATE_PARENT);
+static SUNXI_CCU_DUALDIV_MUX_GATE(i2s2_clk, "i2s2", i2s_parents, 0x034,
+				  0, 5,		/* M */
+				  5, 5,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_SET_RATE_PARENT);
+static SUNXI_CCU_DUALDIV_MUX_GATE(i2s3_clk, "i2s3", i2s_parents, 0x038,
+				  0, 5,		/* M */
+				  5, 5,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_SET_RATE_PARENT);
+
+static const struct clk_parent_data i2s3_asrc_parents[] = {
+	{ .fw_name = "pll-periph0-300m" },
+	{ .hw = &pll_periph1_div2_clk.hw },
+	{ .hw = &pll_periph1_div5_clk.hw },
+};
+static SUNXI_CCU_DUALDIV_MUX_GATE(i2s3_asrc_clk, "i2s3-asrc",
+				  i2s3_asrc_parents, 0x038,
+				  0, 5,		/* M */
+				  5, 5,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE_DATA(bus_i2s0_clk, "bus-i2s0", osc24M, 0x040, BIT(0), 0);
+static SUNXI_CCU_GATE_DATA(bus_i2s1_clk, "bus-i2s1", osc24M, 0x040, BIT(1), 0);
+static SUNXI_CCU_GATE_DATA(bus_i2s2_clk, "bus-i2s2", osc24M, 0x040, BIT(2), 0);
+static SUNXI_CCU_GATE_DATA(bus_i2s3_clk, "bus-i2s3", osc24M, 0x040, BIT(3), 0);
+
+static const struct clk_parent_data audio_parents[] = {
+	{ .fw_name = "pll-audio0-4x" },
+	{ .hw = &pll_periph1_div2_clk.hw },
+	{ .hw = &pll_periph1_div5_clk.hw },
+};
+static SUNXI_CCU_DUALDIV_MUX_GATE(spdif_tx_clk, "spdif-tx",
+				  audio_parents, 0x044,
+				  0, 5,		/* M */
+				  5, 5,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_SET_RATE_PARENT);
+static SUNXI_CCU_DUALDIV_MUX_GATE(spdif_rx_clk, "spdif-rx",
+				  i2s3_asrc_parents, 0x048,
+				  0, 5,		/* M */
+				  5, 5,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE_DATA(bus_spdif_clk, "bus-spdif", osc24M, 0x04c, BIT(0), 0);
+
+static SUNXI_CCU_DUALDIV_MUX_GATE(dmic_clk, "dmic", audio_parents, 0x050,
+				  0, 5,		/* M */
+				  5, 5,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE_DATA(bus_dmic_clk, "bus-dmic", osc24M, 0x054, BIT(0), 0);
+
+static SUNXI_CCU_DUALDIV_MUX_GATE(audio_dac_clk, "audio-dac",
+				  audio_parents, 0x058,
+				  0, 5,		/* M */
+				  5, 5,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_SET_RATE_PARENT);
+static SUNXI_CCU_DUALDIV_MUX_GATE(audio_adc_clk, "audio-adc",
+				  audio_parents, 0x05c,
+				  0, 5,		/* M */
+				  5, 5,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE_DATA(bus_audio_codec_clk, "bus-audio-codec",
+			   osc24M, 0x060, BIT(0), 0);
+
+static SUNXI_CCU_GATE_DATA(bus_dsp_msgbox_clk, "bus-dsp-msgbox",
+			   osc24M, 0x068, BIT(0), 0);
+static SUNXI_CCU_GATE_DATA(bus_dsp_cfg_clk, "bus-dsp-cfg",
+			   osc24M, 0x06c, BIT(0), 0);
+
+static SUNXI_CCU_GATE_DATA(bus_npu_hclk, "bus-npu-hclk", osc24M, 0x070, BIT(1), 0);
+static SUNXI_CCU_GATE_DATA(bus_npu_aclk, "bus-npu-aclk", osc24M, 0x070, BIT(2), 0);
+
+static const struct clk_parent_data timer_parents[] = {
+	{ .fw_name = "hosc" },
+	{ .fw_name = "losc" },
+	{ .fw_name = "iosc" },
+	{ .fw_name = "r-ahb" }
+};
+static SUNXI_CCU_P_DATA_WITH_MUX_GATE(mcu_timer0_clk, "mcu-timer0", timer_parents,
+				      0x074,
+				      1, 3,	/* P */
+				      4, 2,	/* mux */
+				      BIT(0),	/* gate */
+				      0);
+static SUNXI_CCU_P_DATA_WITH_MUX_GATE(mcu_timer1_clk, "mcu-timer1", timer_parents,
+				      0x078,
+				      1, 3,	/* P */
+				      4, 2,	/* mux */
+				      BIT(0),	/* gate */
+				      0);
+static SUNXI_CCU_P_DATA_WITH_MUX_GATE(mcu_timer2_clk, "mcu-timer2", timer_parents,
+				      0x07c,
+				      1, 3,	/* P */
+				      4, 2,	/* mux */
+				      BIT(0),	/* gate */
+				      0);
+static SUNXI_CCU_P_DATA_WITH_MUX_GATE(mcu_timer3_clk, "mcu-timer3", timer_parents,
+				      0x080,
+				      1, 3,	/* P */
+				      4, 2,	/* mux */
+				      BIT(0),	/* gate */
+				      0);
+static SUNXI_CCU_P_DATA_WITH_MUX_GATE(mcu_timer4_clk, "mcu-timer4", timer_parents,
+				      0x084,
+				      1, 3,	/* P */
+				      4, 2,	/* mux */
+				      BIT(0),	/* gate */
+				      0);
+static SUNXI_CCU_P_DATA_WITH_MUX_GATE(mcu_timer5_clk, "mcu-timer5", timer_parents,
+				      0x088,
+				      1, 3,	/* P */
+				      4, 2,	/* mux */
+				      BIT(0),	/* gate */
+				      0);
+static SUNXI_CCU_GATE_DATA(bus_mcu_timer_clk, "bus-mcu-timer", osc24M, 0x08c, BIT(0), 0);
+static SUNXI_CCU_GATE_DATA(bus_mcu_dma_clk, "bus-mcu-dma", osc24M, 0x104, BIT(0), 0);
+static SUNXI_CCU_GATE_DATA(tzma0_clk, "tzma0", osc24M, 0x108, BIT(0), 0);
+static SUNXI_CCU_GATE_DATA(tzma1_clk, "tzma1", osc24M, 0x10c, BIT(0), 0);
+static SUNXI_CCU_GATE_DATA(bus_pubsram_clk, "bus-pubsram", osc24M, 0x114, BIT(0), 0);
+
+/*
+ * user manual has "mbus" clock as parent of both clocks below,
+ * but this makes more sense, since BSP MCU DMA controller has
+ * reference to both of them, likely needing both enabled.
+ */
+static SUNXI_CCU_GATE_FW(mbus_mcu_clk, "mbus-mcu", "mbus", 0x11c, BIT(1), 0);
+static SUNXI_CCU_GATE_HW(mbus_mcu_dma_clk, "mbus-mcu-dma",
+			 &mbus_mcu_clk.common.hw, 0x11c, BIT(0), 0);
+
+static const struct clk_parent_data riscv_pwm_parents[] = {
+	{ .fw_name = "hosc" },
+	{ .fw_name = "losc" },
+	{ .fw_name = "iosc" },
+};
+
+static SUNXI_CCU_MUX_DATA_WITH_GATE(riscv_clk, "riscv",
+				    riscv_pwm_parents, 0x120,
+				    27, 3, BIT(31), 0);
+static SUNXI_CCU_GATE_DATA(bus_riscv_cfg_clk, "bus-riscv-cfg", osc24M,
+			   0x124, BIT(0), 0);
+static SUNXI_CCU_GATE_DATA(bus_riscv_msgbox_clk, "bus-riscv-msgbox", osc24M,
+			   0x128, BIT(0), 0);
+
+static SUNXI_CCU_MUX_DATA_WITH_GATE(mcu_pwm0_clk, "mcu-pwm0",
+				    riscv_pwm_parents, 0x130,
+				    27, 3, BIT(31), 0);
+static SUNXI_CCU_GATE_DATA(bus_mcu_pwm0_clk, "bus-mcu-pwm0", osc24M,
+			   0x128, BIT(0), 0);
+
+/*
+ * Contains all clocks that are controlled by a hardware register. They
+ * have a (sunxi) .common member, which needs to be initialised by the common
+ * sunxi CCU code, to be filled with the MMIO base address and the shared lock.
+ */
+static struct ccu_common *sun55i_a523_mcu_ccu_clks[] = {
+	&pll_audio1_clk.common,
+	&audio_out_clk.common,
+	&dsp_clk.common,
+	&i2s0_clk.common,
+	&i2s1_clk.common,
+	&i2s2_clk.common,
+	&i2s3_clk.common,
+	&i2s3_asrc_clk.common,
+	&bus_i2s0_clk.common,
+	&bus_i2s1_clk.common,
+	&bus_i2s2_clk.common,
+	&bus_i2s3_clk.common,
+	&spdif_tx_clk.common,
+	&spdif_rx_clk.common,
+	&bus_spdif_clk.common,
+	&dmic_clk.common,
+	&bus_dmic_clk.common,
+	&audio_dac_clk.common,
+	&audio_adc_clk.common,
+	&bus_audio_codec_clk.common,
+	&bus_dsp_msgbox_clk.common,
+	&bus_dsp_cfg_clk.common,
+	&bus_npu_aclk.common,
+	&bus_npu_hclk.common,
+	&mcu_timer0_clk.common,
+	&mcu_timer1_clk.common,
+	&mcu_timer2_clk.common,
+	&mcu_timer3_clk.common,
+	&mcu_timer4_clk.common,
+	&mcu_timer5_clk.common,
+	&bus_mcu_timer_clk.common,
+	&bus_mcu_dma_clk.common,
+	&tzma0_clk.common,
+	&tzma1_clk.common,
+	&bus_pubsram_clk.common,
+	&mbus_mcu_dma_clk.common,
+	&mbus_mcu_clk.common,
+	&riscv_clk.common,
+	&bus_riscv_cfg_clk.common,
+	&bus_riscv_msgbox_clk.common,
+	&mcu_pwm0_clk.common,
+	&bus_mcu_pwm0_clk.common,
+};
+
+static struct clk_hw_onecell_data sun55i_a523_mcu_hw_clks = {
+	.num	= CLK_BUS_MCU_PWM0 + 1,
+	.hws	= {
+		[CLK_MCU_PLL_AUDIO1]		= &pll_audio1_clk.common.hw,
+		[CLK_MCU_PLL_AUDIO1_DIV2]	= &pll_periph1_div2_clk.hw,
+		[CLK_MCU_PLL_AUDIO1_DIV5]	= &pll_periph1_div5_clk.hw,
+		[CLK_MCU_AUDIO_OUT]		= &audio_out_clk.common.hw,
+		[CLK_MCU_DSP]			= &dsp_clk.common.hw,
+		[CLK_MCU_I2S0]			= &i2s0_clk.common.hw,
+		[CLK_MCU_I2S1]			= &i2s1_clk.common.hw,
+		[CLK_MCU_I2S2]			= &i2s2_clk.common.hw,
+		[CLK_MCU_I2S3]			= &i2s3_clk.common.hw,
+		[CLK_MCU_I2S3_ASRC]		= &i2s3_asrc_clk.common.hw,
+		[CLK_BUS_MCU_I2S0]		= &bus_i2s0_clk.common.hw,
+		[CLK_BUS_MCU_I2S1]		= &bus_i2s1_clk.common.hw,
+		[CLK_BUS_MCU_I2S2]		= &bus_i2s2_clk.common.hw,
+		[CLK_BUS_MCU_I2S3]		= &bus_i2s3_clk.common.hw,
+		[CLK_MCU_SPDIF_TX]		= &spdif_tx_clk.common.hw,
+		[CLK_MCU_SPDIF_RX]		= &spdif_rx_clk.common.hw,
+		[CLK_BUS_MCU_SPDIF]		= &bus_spdif_clk.common.hw,
+		[CLK_MCU_DMIC]			= &dmic_clk.common.hw,
+		[CLK_BUS_MCU_DMIC]		= &bus_dmic_clk.common.hw,
+		[CLK_MCU_AUDIO_CODEC_DAC]	= &audio_dac_clk.common.hw,
+		[CLK_MCU_AUDIO_CODEC_ADC]	= &audio_adc_clk.common.hw,
+		[CLK_BUS_MCU_AUDIO_CODEC]	= &bus_audio_codec_clk.common.hw,
+		[CLK_BUS_MCU_DSP_MSGBOX]	= &bus_dsp_msgbox_clk.common.hw,
+		[CLK_BUS_MCU_DSP_CFG]		= &bus_dsp_cfg_clk.common.hw,
+		[CLK_BUS_MCU_NPU_HCLK]		= &bus_npu_hclk.common.hw,
+		[CLK_BUS_MCU_NPU_ACLK]		= &bus_npu_aclk.common.hw,
+		[CLK_MCU_TIMER0]		= &mcu_timer0_clk.common.hw,
+		[CLK_MCU_TIMER1]		= &mcu_timer1_clk.common.hw,
+		[CLK_MCU_TIMER2]		= &mcu_timer2_clk.common.hw,
+		[CLK_MCU_TIMER3]		= &mcu_timer3_clk.common.hw,
+		[CLK_MCU_TIMER4]		= &mcu_timer4_clk.common.hw,
+		[CLK_MCU_TIMER5]		= &mcu_timer5_clk.common.hw,
+		[CLK_BUS_MCU_TIMER]		= &bus_mcu_timer_clk.common.hw,
+		[CLK_BUS_MCU_DMA]		= &bus_mcu_dma_clk.common.hw,
+		[CLK_MCU_TZMA0]			= &tzma0_clk.common.hw,
+		[CLK_MCU_TZMA1]			= &tzma1_clk.common.hw,
+		[CLK_BUS_MCU_PUBSRAM]		= &bus_pubsram_clk.common.hw,
+		[CLK_MCU_MBUS_DMA]		= &mbus_mcu_dma_clk.common.hw,
+		[CLK_MCU_MBUS]			= &mbus_mcu_clk.common.hw,
+		[CLK_MCU_RISCV]			= &riscv_clk.common.hw,
+		[CLK_BUS_MCU_RISCV_CFG]		= &bus_riscv_cfg_clk.common.hw,
+		[CLK_BUS_MCU_RISCV_MSGBOX]	= &bus_riscv_msgbox_clk.common.hw,
+		[CLK_MCU_PWM0]			= &mcu_pwm0_clk.common.hw,
+		[CLK_BUS_MCU_PWM0]		= &bus_mcu_pwm0_clk.common.hw,
+	},
+};
+
+static struct ccu_reset_map sun55i_a523_mcu_ccu_resets[] = {
+	[RST_BUS_MCU_I2S0]		= { 0x0040, BIT(16) },
+	[RST_BUS_MCU_I2S1]		= { 0x0040, BIT(17) },
+	[RST_BUS_MCU_I2S2]		= { 0x0040, BIT(18) },
+	[RST_BUS_MCU_I2S3]		= { 0x0040, BIT(19) },
+	[RST_BUS_MCU_SPDIF]		= { 0x004c, BIT(16) },
+	[RST_BUS_MCU_DMIC]		= { 0x0054, BIT(16) },
+	[RST_BUS_MCU_AUDIO_CODEC]	= { 0x0060, BIT(16) },
+	[RST_BUS_MCU_DSP_MSGBOX]	= { 0x0068, BIT(16) },
+	[RST_BUS_MCU_DSP_CFG]		= { 0x006c, BIT(16) },
+	[RST_BUS_MCU_NPU]		= { 0x0070, BIT(16) },
+	[RST_BUS_MCU_TIMER]		= { 0x008c, BIT(16) },
+	[RST_BUS_MCU_DSP_DEBUG]		= { 0x0100, BIT(16) },
+	[RST_BUS_MCU_DSP]		= { 0x0100, BIT(17) },
+	[RST_BUS_MCU_DMA]		= { 0x0104, BIT(16) },
+	[RST_BUS_MCU_PUBSRAM]		= { 0x0114, BIT(16) },
+	[RST_BUS_MCU_RISCV_CFG]		= { 0x0124, BIT(16) },
+	[RST_BUS_MCU_RISCV_DEBUG]	= { 0x0124, BIT(17) },
+	[RST_BUS_MCU_RISCV_CORE]	= { 0x0124, BIT(18) },
+	[RST_BUS_MCU_RISCV_MSGBOX]	= { 0x0128, BIT(16) },
+	[RST_BUS_MCU_PWM0]		= { 0x0134, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun55i_a523_mcu_ccu_desc = {
+	.ccu_clks	= sun55i_a523_mcu_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun55i_a523_mcu_ccu_clks),
+
+	.hw_clks	= &sun55i_a523_mcu_hw_clks,
+
+	.resets		= sun55i_a523_mcu_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun55i_a523_mcu_ccu_resets),
+};
+
+static int sun55i_a523_mcu_ccu_probe(struct platform_device *pdev)
+{
+	void __iomem *reg;
+	u32 val;
+	int ret;
+
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	val = readl(reg + SUN55I_A523_PLL_AUDIO1_REG);
+
+	/*
+	 * The PLL clock code does not model all bits, for instance it does
+	 * not support a separate enable and gate bit. We present the
+	 * gate bit(27) as the enable bit, but then have to set the
+	 * PLL Enable, LDO Enable, and Lock Enable bits on all PLLs here.
+	 */
+	val |= BIT(31) | BIT(30) | BIT(29);
+
+	/* Enforce p1 = 5, p0 = 2 (the default) for PLL_AUDIO1 */
+	val &= ~(GENMASK(22, 20) | GENMASK(18, 16));
+	val |= (4 << 20) | (1 << 16);
+
+	writel(val, reg + SUN55I_A523_PLL_AUDIO1_REG);
+
+	ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun55i_a523_mcu_ccu_desc);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct of_device_id sun55i_a523_mcu_ccu_ids[] = {
+	{ .compatible = "allwinner,sun55i-a523-mcu-ccu" },
+	{ }
+};
+
+static struct platform_driver sun55i_a523_mcu_ccu_driver = {
+	.probe	= sun55i_a523_mcu_ccu_probe,
+	.driver	= {
+		.name			= "sun55i-a523-mcu-ccu",
+		.suppress_bind_attrs	= true,
+		.of_match_table		= sun55i_a523_mcu_ccu_ids,
+	},
+};
+module_platform_driver(sun55i_a523_mcu_ccu_driver);
+
+MODULE_IMPORT_NS("SUNXI_CCU");
+MODULE_DESCRIPTION("Support for the Allwinner A523 MCU CCU");
+MODULE_LICENSE("GPL");
-- 
2.39.5

[PATCH 7/8] arm64: dts: allwinner: a523: Add MCU PRCM CCU node

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens@csie.org>

Add a device node for the third supported clock controller found in the
A523 / T527 SoCs. This controller has clocks and resets for the RISC-V
MCU, and others peripherals possibly meant to operate in low power mode
driven by the MCU, such as audio interfaces, an audio DSP, and the NPU.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index 79bd9ce08c7c..b6e82d53af54 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -4,8 +4,10 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun55i-a523-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-mcu-ccu.h>
 #include <dt-bindings/clock/sun55i-a523-r-ccu.h>
 #include <dt-bindings/reset/sun55i-a523-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-mcu-ccu.h>
 #include <dt-bindings/reset/sun55i-a523-r-ccu.h>
 #include <dt-bindings/power/allwinner,sun55i-a523-ppu.h>
 #include <dt-bindings/power/allwinner,sun55i-a523-pck-600.h>
@@ -825,6 +827,29 @@ rtc: rtc@7090000 {
 			clock-names = "bus", "hosc", "ahb";
 			#clock-cells = <1>;
 		};
+
+		mcu_ccu: clock-controller@7102000 {
+			compatible = "allwinner,sun55i-a523-mcu-ccu";
+			reg = <0x7102000 0x164>;
+			clocks = <&osc24M>,
+				 <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_AUDIO0_4X>,
+				 <&ccu CLK_PLL_PERIPH0_300M>,
+				 <&ccu CLK_DSP>,
+				 <&r_ccu CLK_R_AHB>,
+				 <&ccu CLK_MBUS>;
+			clock-names = "hosc",
+				      "losc",
+				      "iosc",
+				      "pll-audio0-4x",
+				      "pll-periph0-300m",
+				      "dsp",
+				      "r-ahb",
+				      "mbus";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
 	};
 
 	thermal-zones {
-- 
2.39.5

[PATCH 8/8] arm64: dts: allwinner: a523: Add NPU device node

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens@csie.org>

The Allwinner T527 SoC has an NPU built in. Based on identifiers found
in the BSP, it is a Vivante IP block. After enabling it, the etnaviv
driver reports it as a GC9000 revision 9003.

The standard bindings are used as everything matches directly. There is
no option for DVFS at the moment. That might require some more work,
perhaps on the efuse side to map speed bins.

It is unclear whether the NPU block is fused out at the hardware level
or the BSP limits use of the NPU through software, as the author only
has boards with the T527.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index b6e82d53af54..1ab5b87ec78e 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -850,6 +850,18 @@ mcu_ccu: clock-controller@7102000 {
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
+
+		npu: npu@7122000 {
+			compatible = "vivante,gc";
+			reg = <0x07122000 0x1000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mcu_ccu CLK_BUS_MCU_NPU_ACLK>,
+				 <&ccu CLK_NPU>,
+				 <&mcu_ccu CLK_BUS_MCU_NPU_HCLK>;
+			clock-names = "bus", "core", "reg";
+			resets = <&mcu_ccu RST_BUS_MCU_NPU>;
+			power-domains = <&ppu PD_NPU>;
+		};
 	};
 
 	thermal-zones {
-- 
2.39.5