[PATCH v4 1/6] dt-bindings: phy: ti,tcan104x-can: Document NXP TJA105X/1048

[Peng Fan <peng.fan@nxp.com>]

The TJA105[1,7] is a high-speed CAN transceiver which is a pin-compatible
alternative for TI TCAN1043 with sleep mode supported, and has a compatible
programming model, therefore use ti,tcan1043 as fallback compatible.

The TJA1048 is a dual high-speed CAN transceiver with sleep mode supported.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 .../devicetree/bindings/phy/ti,tcan104x-can.yaml   | 30 ++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
index 4a8c3829d85d3c4a4963750d03567c1c345beb91..f8e0c24856a2ba83b5c988b246464f47e11a032f 100644
--- a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
@@ -19,18 +19,25 @@ properties:
           - enum:
               - microchip,ata6561
           - const: ti,tcan1042
+      - items:
+          - enum:
+              - nxp,tja1051
+              - nxp,tja1057
+          - const: ti,tcan1043
       - enum:
           - ti,tcan1042
           - ti,tcan1043
+          - nxp,tja1048
           - nxp,tjr1443
 
   '#phy-cells':
-    const: 0
+    enum: [0, 1]
 
   standby-gpios:
     description:
       gpio node to toggle standby signal on transceiver
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   enable-gpios:
     description:
@@ -53,6 +60,25 @@ required:
   - compatible
   - '#phy-cells'
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nxp,tja1048
+    then:
+      properties:
+        '#phy-cells':
+          const: 1
+        standby-gpios:
+          minItems: 2
+    else:
+      properties:
+        '#phy-cells':
+          const: 0
+        standby-gpios:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:

-- 
2.37.1