From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Felix Fietkau <nbd@nbd.name>, Ryder Lee <ryder.lee@mediatek.com>,
Shayne Chen <shayne.chen@mediatek.com>,
Sean Wang <sean.wang@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Sujuan Chen <sujuan.chen@mediatek.com>,
Lorenzo Bianconi <lorenzo@kernel.org>
Cc: linux-wireless@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, Rex Lu <rex.lu@mediatek.com>,
Benjamin Lin <benjamin-jw.lin@mediatek.com>
Subject: [PATCH mt76 v2 09/14] wifi: mt76: mt7996: Enable WED for MT7992 chipset
Date: Mon, 01 Sep 2025 22:58:05 +0200 [thread overview]
Message-ID: <20250901-mt7996-rro-rework-v2-9-1f95086b51d1@kernel.org> (raw)
In-Reply-To: <20250901-mt7996-rro-rework-v2-0-1f95086b51d1@kernel.org>
From: Rex Lu <rex.lu@mediatek.com>
Introduce WED offload support for MT7992 chipset in MT7996 driver.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7996/dma.c | 26 +++++++-
drivers/net/wireless/mediatek/mt76/mt7996/init.c | 11 ++--
drivers/net/wireless/mediatek/mt76/mt7996/main.c | 19 +++---
drivers/net/wireless/mediatek/mt76/mt7996/mmio.c | 72 ++++++++++++++++------
drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h | 3 +
drivers/net/wireless/mediatek/mt76/mt7996/pci.c | 1 +
drivers/net/wireless/mediatek/mt76/mt7996/regs.h | 4 ++
7 files changed, 101 insertions(+), 35 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/dma.c b/drivers/net/wireless/mediatek/mt76/mt7996/dma.c
index b3665bb0a433ae4cdbf02fa647d644961509d7aa..c5fd25acf9a1a60d4aaffe8ba6d2cf2aafe4fd87 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/dma.c
@@ -17,7 +17,7 @@ int mt7996_init_tx_queues(struct mt7996_phy *phy, int idx, int n_desc,
ring_base += MT_TXQ_ID(0) * MT_RING_SIZE;
idx -= MT_TXQ_ID(0);
- if (phy->mt76->band_idx == MT_BAND2)
+ if (wed == &dev->mt76.mmio.wed_hif2)
flags = MT_WED_Q_TX(0);
else
flags = MT_WED_Q_TX(idx);
@@ -429,6 +429,30 @@ static void mt7996_dma_enable(struct mt7996_dev *dev, bool reset)
mt76_rmw(dev, MT_WFDMA_AXI_R2A_CTRL,
MT_WFDMA_AXI_R2A_CTRL_OUTSTAND_MASK, 0x14);
+ if (dev->hif2->speed < PCIE_SPEED_5_0GT ||
+ (dev->hif2->speed == PCIE_SPEED_5_0GT &&
+ dev->hif2->width < PCIE_LNK_X2)) {
+ mt76_rmw(dev, WF_WFDMA0_GLO_CFG_EXT0 + hif1_ofs,
+ WF_WFDMA0_GLO_CFG_EXT0_OUTSTAND_MASK,
+ FIELD_PREP(WF_WFDMA0_GLO_CFG_EXT0_OUTSTAND_MASK,
+ 0x1));
+ mt76_rmw(dev, MT_WFDMA_AXI_R2A_CTRL2,
+ MT_WFDMA_AXI_R2A_CTRL2_OUTSTAND_MASK,
+ FIELD_PREP(MT_WFDMA_AXI_R2A_CTRL2_OUTSTAND_MASK,
+ 0x1));
+ } else if (dev->hif2->speed < PCIE_SPEED_8_0GT ||
+ (dev->hif2->speed == PCIE_SPEED_8_0GT &&
+ dev->hif2->width < PCIE_LNK_X2)) {
+ mt76_rmw(dev, WF_WFDMA0_GLO_CFG_EXT0 + hif1_ofs,
+ WF_WFDMA0_GLO_CFG_EXT0_OUTSTAND_MASK,
+ FIELD_PREP(WF_WFDMA0_GLO_CFG_EXT0_OUTSTAND_MASK,
+ 0x2));
+ mt76_rmw(dev, MT_WFDMA_AXI_R2A_CTRL2,
+ MT_WFDMA_AXI_R2A_CTRL2_OUTSTAND_MASK,
+ FIELD_PREP(MT_WFDMA_AXI_R2A_CTRL2_OUTSTAND_MASK,
+ 0x2));
+ }
+
/* WFDMA rx threshold */
mt76_wr(dev, MT_WFDMA0_PAUSE_RX_Q_45_TH + hif1_ofs, 0xc000c);
mt76_wr(dev, MT_WFDMA0_PAUSE_RX_Q_67_TH + hif1_ofs, 0x10008);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/init.c b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
index 023f788ac5f8ce6f01e5556a6000765ed42cc646..075e5caaa31e54071111b6919bfd9b4eabca5177 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
@@ -666,7 +666,9 @@ static int mt7996_register_phy(struct mt7996_dev *dev, enum mt76_band_id band)
if (!mt7996_band_valid(dev, band))
return 0;
- if (is_mt7996(&dev->mt76) && band == MT_BAND2 && dev->hif2) {
+ if (dev->hif2 &&
+ ((is_mt7996(&dev->mt76) && band == MT_BAND2) ||
+ (is_mt7992(&dev->mt76) && band == MT_BAND1))) {
hif1_ofs = MT_WFDMA0_PCIE1(0) - MT_WFDMA0(0);
wed = &dev->mt76.mmio.wed_hif2;
}
@@ -724,10 +726,9 @@ static int mt7996_register_phy(struct mt7996_dev *dev, enum mt76_band_id band)
goto error;
if (wed == &dev->mt76.mmio.wed_hif2 && mtk_wed_device_active(wed)) {
- u32 irq_mask = dev->mt76.mmio.irqmask | MT_INT_TX_DONE_BAND2;
-
- mt76_wr(dev, MT_INT1_MASK_CSR, irq_mask);
- mtk_wed_device_start(&dev->mt76.mmio.wed_hif2, irq_mask);
+ mt76_wr(dev, MT_INT_PCIE1_MASK_CSR, MT_INT_TX_RX_DONE_EXT);
+ mtk_wed_device_start(&dev->mt76.mmio.wed_hif2,
+ MT_INT_TX_RX_DONE_EXT);
}
return 0;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/main.c b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
index d4a79db4371c2789c96b2eed8dd8887581f6a98a..87d9ceaacc3ca1c34886414530c592c3c4c6fdfb 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
@@ -2156,9 +2156,7 @@ mt7996_net_fill_forward_path(struct ieee80211_hw *hw,
struct mt7996_dev *dev = mt7996_hw_dev(hw);
struct mtk_wed_device *wed = &dev->mt76.mmio.wed;
struct mt7996_sta_link *msta_link;
- struct mt7996_vif_link *link;
struct mt76_vif_link *mlink;
- struct mt7996_phy *phy;
mlink = rcu_dereference(mvif->mt76.link[msta->deflink_id]);
if (!mlink)
@@ -2171,13 +2169,10 @@ mt7996_net_fill_forward_path(struct ieee80211_hw *hw,
if (!msta_link->wcid.sta || msta_link->wcid.idx > MT7996_WTBL_STA)
return -EIO;
- link = (struct mt7996_vif_link *)mlink;
- phy = mt7996_vif_link_phy(link);
- if (!phy)
- return -ENODEV;
-
- if (phy != &dev->phy && phy->mt76->band_idx == MT_BAND2)
- wed = &dev->mt76.mmio.wed_hif2;
+ if (dev->hif2 &&
+ ((is_mt7996(&dev->mt76) && msta_link->wcid.phy_idx == MT_BAND2) ||
+ (is_mt7992(&dev->mt76) && msta_link->wcid.phy_idx == MT_BAND1)))
+ wed = &dev->mt76.mmio.wed_hif2;
if (!mtk_wed_device_active(wed))
return -ENODEV;
@@ -2189,7 +2184,11 @@ mt7996_net_fill_forward_path(struct ieee80211_hw *hw,
path->mtk_wdma.queue = 0;
path->mtk_wdma.wcid = msta_link->wcid.idx;
- path->mtk_wdma.amsdu = mtk_wed_is_amsdu_supported(wed);
+ if (ieee80211_hw_check(hw, SUPPORTS_AMSDU_IN_AMPDU) &&
+ mtk_wed_is_amsdu_supported(wed))
+ path->mtk_wdma.amsdu = msta_link->wcid.amsdu;
+ else
+ path->mtk_wdma.amsdu = 0;
ctx->dev = NULL;
return 0;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c b/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c
index a8b4ef433c2bfdbbf79ae7f6aa54f33a5d5254ff..aa70e5fce98f005ef5c3f588203f61e179ff04e8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c
@@ -459,14 +459,14 @@ int mt7996_mmio_wed_init(struct mt7996_dev *dev, void *pdev_ptr,
#ifdef CONFIG_NET_MEDIATEK_SOC_WED
struct mtk_wed_device *wed = &dev->mt76.mmio.wed;
struct pci_dev *pci_dev = pdev_ptr;
- u32 hif1_ofs = 0;
+ u32 hif1_ofs;
if (!wed_enable)
return 0;
dev->has_rro = true;
- hif1_ofs = MT_WFDMA0_PCIE1(0) - MT_WFDMA0(0);
+ hif1_ofs = dev->hif2 ? MT_WFDMA0_PCIE1(0) - MT_WFDMA0(0) : 0;
if (hif2)
wed = &dev->mt76.mmio.wed_hif2;
@@ -491,10 +491,17 @@ int mt7996_mmio_wed_init(struct mt7996_dev *dev, void *pdev_ptr,
MT_TXQ_RING_BASE(0) +
MT7996_TXQ_BAND2 * MT_RING_SIZE;
if (dev->has_rro) {
- wed->wlan.wpdma_txfree = wed->wlan.phy_base + hif1_ofs +
- MT_RXQ_RING_BASE(0) +
- MT7996_RXQ_TXFREE2 * MT_RING_SIZE;
- wed->wlan.txfree_tbit = ffs(MT_INT_RX_TXFREE_EXT) - 1;
+ if (is_mt7996(&dev->mt76)) {
+ wed->wlan.txfree_tbit = ffs(MT_INT_RX_TXFREE_EXT) - 1;
+ wed->wlan.wpdma_txfree = wed->wlan.phy_base + hif1_ofs +
+ MT_RXQ_RING_BASE(0) +
+ MT7996_RXQ_TXFREE2 * MT_RING_SIZE;
+ } else {
+ wed->wlan.txfree_tbit = ffs(MT_INT_RX_TXFREE_BAND1_EXT) - 1;
+ wed->wlan.wpdma_txfree = wed->wlan.phy_base + hif1_ofs +
+ MT_RXQ_RING_BASE(0) +
+ MT7996_RXQ_MCU_WA_EXT * MT_RING_SIZE;
+ }
} else {
wed->wlan.wpdma_txfree = wed->wlan.phy_base + hif1_ofs +
MT_RXQ_RING_BASE(0) +
@@ -504,8 +511,8 @@ int mt7996_mmio_wed_init(struct mt7996_dev *dev, void *pdev_ptr,
wed->wlan.wpdma_rx_glo = wed->wlan.phy_base + hif1_ofs + MT_WFDMA0_GLO_CFG;
wed->wlan.wpdma_rx[0] = wed->wlan.phy_base + hif1_ofs +
- MT_RXQ_RING_BASE(MT7996_RXQ_BAND0) +
- MT7996_RXQ_BAND0 * MT_RING_SIZE;
+ MT_RXQ_RING_BASE(MT7996_RXQ_BAND2) +
+ MT7996_RXQ_BAND2 * MT_RING_SIZE;
wed->wlan.id = MT7996_DEVICE_ID_2;
wed->wlan.tx_tbit[0] = ffs(MT_INT_TX_DONE_BAND2) - 1;
@@ -525,9 +532,19 @@ int mt7996_mmio_wed_init(struct mt7996_dev *dev, void *pdev_ptr,
wed->wlan.wpdma_rx_rro[0] = wed->wlan.phy_base +
MT_RXQ_RING_BASE(MT7996_RXQ_RRO_BAND0) +
MT7996_RXQ_RRO_BAND0 * MT_RING_SIZE;
- wed->wlan.wpdma_rx_rro[1] = wed->wlan.phy_base + hif1_ofs +
- MT_RXQ_RING_BASE(MT7996_RXQ_RRO_BAND2) +
- MT7996_RXQ_RRO_BAND2 * MT_RING_SIZE;
+ if (is_mt7996(&dev->mt76)) {
+ wed->wlan.wpdma_rx_rro[1] = wed->wlan.phy_base + hif1_ofs +
+ MT_RXQ_RING_BASE(MT7996_RXQ_RRO_BAND2) +
+ MT7996_RXQ_RRO_BAND2 * MT_RING_SIZE;
+ } else {
+ wed->wlan.wpdma_rx_rro[1] = wed->wlan.phy_base + hif1_ofs +
+ MT_RXQ_RING_BASE(MT7996_RXQ_RRO_BAND1) +
+ MT7996_RXQ_RRO_BAND1 * MT_RING_SIZE;
+ wed->wlan.wpdma_rx[1] = wed->wlan.phy_base + hif1_ofs +
+ MT_RXQ_RING_BASE(MT7996_RXQ_BAND1) +
+ MT7996_RXQ_BAND1 * MT_RING_SIZE;
+ }
+
wed->wlan.wpdma_rx_pg = wed->wlan.phy_base +
MT_RXQ_RING_BASE(MT7996_RXQ_MSDU_PG_BAND0) +
MT7996_RXQ_MSDU_PG_BAND0 * MT_RING_SIZE;
@@ -537,10 +554,14 @@ int mt7996_mmio_wed_init(struct mt7996_dev *dev, void *pdev_ptr,
wed->wlan.rx_size = SKB_WITH_OVERHEAD(MT_RX_BUF_SIZE);
wed->wlan.rx_tbit[0] = ffs(MT_INT_RX_DONE_BAND0) - 1;
- wed->wlan.rx_tbit[1] = ffs(MT_INT_RX_DONE_BAND2) - 1;
-
wed->wlan.rro_rx_tbit[0] = ffs(MT_INT_RX_DONE_RRO_BAND0) - 1;
- wed->wlan.rro_rx_tbit[1] = ffs(MT_INT_RX_DONE_RRO_BAND2) - 1;
+ if (is_mt7996(&dev->mt76)) {
+ wed->wlan.rx_tbit[1] = ffs(MT_INT_RX_DONE_BAND2) - 1;
+ wed->wlan.rro_rx_tbit[1] = ffs(MT_INT_RX_DONE_RRO_BAND2) - 1;
+ } else {
+ wed->wlan.rx_tbit[1] = ffs(MT_INT_RX_DONE_BAND1) - 1;
+ wed->wlan.rro_rx_tbit[1] = ffs(MT_INT_RX_DONE_RRO_BAND1) - 1;
+ }
wed->wlan.rx_pg_tbit[0] = ffs(MT_INT_RX_DONE_MSDU_PG_BAND0) - 1;
wed->wlan.rx_pg_tbit[1] = ffs(MT_INT_RX_DONE_MSDU_PG_BAND1) - 1;
@@ -548,16 +569,27 @@ int mt7996_mmio_wed_init(struct mt7996_dev *dev, void *pdev_ptr,
wed->wlan.tx_tbit[0] = ffs(MT_INT_TX_DONE_BAND0) - 1;
wed->wlan.tx_tbit[1] = ffs(MT_INT_TX_DONE_BAND1) - 1;
- if (dev->has_rro) {
- wed->wlan.wpdma_txfree = wed->wlan.phy_base + MT_RXQ_RING_BASE(0) +
- MT7996_RXQ_TXFREE0 * MT_RING_SIZE;
- wed->wlan.txfree_tbit = ffs(MT_INT_RX_TXFREE_MAIN) - 1;
+ if (is_mt7996(&dev->mt76)) {
+ if (dev->has_rro) {
+ wed->wlan.wpdma_txfree = wed->wlan.phy_base +
+ MT_RXQ_RING_BASE(0) +
+ MT7996_RXQ_TXFREE0 * MT_RING_SIZE;
+ wed->wlan.txfree_tbit = ffs(MT_INT_RX_TXFREE_MAIN) - 1;
+ } else {
+ wed->wlan.wpdma_txfree = wed->wlan.phy_base +
+ MT_RXQ_RING_BASE(0) +
+ MT7996_RXQ_MCU_WA_MAIN * MT_RING_SIZE;
+ wed->wlan.txfree_tbit = ffs(MT_INT_RX_DONE_WA_MAIN) - 1;
+ }
} else {
wed->wlan.txfree_tbit = ffs(MT_INT_RX_DONE_WA_MAIN) - 1;
wed->wlan.wpdma_txfree = wed->wlan.phy_base + MT_RXQ_RING_BASE(0) +
MT7996_RXQ_MCU_WA_MAIN * MT_RING_SIZE;
}
dev->mt76.rx_token_size = MT7996_TOKEN_SIZE + wed->wlan.rx_npkt;
+
+ if (dev->hif2 && is_mt7992(&dev->mt76))
+ wed->wlan.id = 0x7992;
}
wed->wlan.nbuf = MT7996_HW_TOKEN_SIZE;
@@ -576,8 +608,10 @@ int mt7996_mmio_wed_init(struct mt7996_dev *dev, void *pdev_ptr,
wed->wlan.reset_complete = mt76_wed_reset_complete;
}
- if (mtk_wed_device_attach(wed))
+ if (mtk_wed_device_attach(wed)) {
+ dev->has_rro = false;
return 0;
+ }
*irq = wed->irq;
dev->mt76.dma_dev = wed->dev;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
index 9af3382003bcfecd2eed5d1384d57bdf65af7f82..f6dfd36a44c0bf587d3ac85a5a9d38e24deb14d4 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
@@ -280,6 +280,9 @@ struct mt7996_hif {
struct device *dev;
void __iomem *regs;
int irq;
+
+ enum pci_bus_speed speed;
+ enum pcie_link_width width;
};
struct mt7996_wed_rro_addr {
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/pci.c b/drivers/net/wireless/mediatek/mt76/mt7996/pci.c
index f5ce50056ee94e2915fd189419905acc8cebd853..3f49bbbba3b9ccd100267f54775838ddef634766 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/pci.c
@@ -87,6 +87,7 @@ static int mt7996_pci_hif2_probe(struct pci_dev *pdev)
hif->dev = &pdev->dev;
hif->regs = pcim_iomap_table(pdev)[0];
hif->irq = pdev->irq;
+ pcie_bandwidth_available(pdev, NULL, &hif->speed, &hif->width);
spin_lock_bh(&hif_lock);
list_add(&hif->list, &hif_list);
spin_unlock_bh(&hif_lock);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/regs.h b/drivers/net/wireless/mediatek/mt76/mt7996/regs.h
index 070cdebcd19d7713ebae1d74fdf0c6062eb7c925..d239fa3f375f5e86f9cf650fda713a4e1e4b2f96 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/regs.h
@@ -442,6 +442,7 @@ enum offs_rev {
#define MT_WFDMA0_PAUSE_RX_Q_RRO_TH MT_WFDMA0(0x27c)
#define WF_WFDMA0_GLO_CFG_EXT0 MT_WFDMA0(0x2b0)
+#define WF_WFDMA0_GLO_CFG_EXT0_OUTSTAND_MASK GENMASK(27, 24)
#define WF_WFDMA0_GLO_CFG_EXT0_RX_WB_RXD BIT(18)
#define WF_WFDMA0_GLO_CFG_EXT0_WED_MERGE_MODE BIT(14)
@@ -473,6 +474,9 @@ enum offs_rev {
#define MT_WFDMA_AXI_R2A_CTRL MT_WFDMA_EXT_CSR(0x500)
#define MT_WFDMA_AXI_R2A_CTRL_OUTSTAND_MASK GENMASK(4, 0)
+#define MT_WFDMA_AXI_R2A_CTRL2 MT_WFDMA_EXT_CSR(0x508)
+#define MT_WFDMA_AXI_R2A_CTRL2_OUTSTAND_MASK GENMASK(31, 28)
+
#define MT_PCIE_RECOG_ID 0xd7090
#define MT_PCIE_RECOG_ID_MASK GENMASK(30, 0)
#define MT_PCIE_RECOG_ID_SEM BIT(31)
--
2.50.1
next prev parent reply other threads:[~2025-09-02 0:52 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-01 20:57 [PATCH mt76 v2 00/14] wifi: mt76: mt7996: Decouple RRO logic from WED support Lorenzo Bianconi
2025-09-01 20:57 ` [PATCH mt76 v2 01/14] wifi: mt76: Add reset_idx to reset_q mt76_queue_ops signature Lorenzo Bianconi
2025-09-01 20:57 ` [PATCH mt76 v2 02/14] wifi: mt76: Remove q->ndesc check in mt76_dma_rx_fill() Lorenzo Bianconi
2025-09-01 20:57 ` [PATCH mt76 v2 03/14] wifi: mt76: Differentiate between RRO data and RRO MSDU queues Lorenzo Bianconi
2025-09-01 20:58 ` [PATCH mt76 v2 04/14] wifi: mt76: mt7996: Initial DMA configuration for MT7992 WED support Lorenzo Bianconi
2025-09-01 20:58 ` [PATCH mt76 v2 05/14] wifi: mt76: mt7996: Enable HW RRO for MT7992 chipset Lorenzo Bianconi
2025-09-01 20:58 ` [PATCH mt76 v2 06/14] wifi: mt76: mt7996: Introduce the capability to reset MT7992 WED device Lorenzo Bianconi
2025-09-01 20:58 ` [PATCH mt76 v2 07/14] wifi: mt76: mt7996: Fix tx-queues initialization for second phy on mt7996 Lorenzo Bianconi
2025-09-01 20:58 ` [PATCH mt76 v2 08/14] wifi: mt76: mt7996: Fix RX packets configuration for primary WED device Lorenzo Bianconi
2025-09-01 20:58 ` Lorenzo Bianconi [this message]
2025-09-01 20:58 ` [PATCH mt76 v2 10/14] wifi: mt76: mt7996: Introduce RRO MSDU callbacks Lorenzo Bianconi
2025-09-01 20:58 ` [PATCH mt76 v2 11/14] wifi: mt76: Add rx_queue_init callback Lorenzo Bianconi
2025-09-01 20:58 ` [PATCH mt76 v2 12/14] wifi: mt76: mt7996: Decouple RRO logic from WED support Lorenzo Bianconi
2025-09-01 20:58 ` [PATCH mt76 v2 13/14] wifi: mt76: Add mt76_dma_get_rxdmad_c_buf utility routione Lorenzo Bianconi
2025-09-01 20:58 ` [PATCH mt76 v2 14/14] wifi: mt76: mt7996: Add SW path for HW-RRO v3.1 Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250901-mt7996-rro-rework-v2-9-1f95086b51d1@kernel.org \
--to=lorenzo@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=benjamin-jw.lin@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=nbd@nbd.name \
--cc=rex.lu@mediatek.com \
--cc=ryder.lee@mediatek.com \
--cc=sean.wang@mediatek.com \
--cc=shayne.chen@mediatek.com \
--cc=sujuan.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).