From: Francesco Dolcini <francesco@dolcini.it>
To: Beleswar Padhi <b-padhi@ti.com>
Cc: nm@ti.com, vigneshr@ti.com, kristo@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, afd@ti.com,
u-kumar1@ti.com, hnagalla@ti.com, jm@ti.com, d-gole@ti.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Hiago De Franco <hiago.franco@toradex.com>,
Francesco Dolcini <francesco.dolcini@toradex.com>,
Emanuele Ghidoli <emanuele.ghidoli@toradex.com>,
Parth Pancholi <parth.pancholi@toradex.com>,
Jo_o Paulo Gon_alves <joao.goncalves@toradex.com>
Subject: Re: [PATCH v4 15/34] arm64: dts: ti: k3-am62p-verdin: Add missing cfg for TI IPC Firmware
Date: Mon, 8 Sep 2025 21:20:35 +0200 [thread overview]
Message-ID: <20250908192035.GA4217@francesco-nb> (raw)
In-Reply-To: <20250908142826.1828676-16-b-padhi@ti.com>
On Mon, Sep 08, 2025 at 07:58:07PM +0530, Beleswar Padhi wrote:
> The wkup_r5fss0_core0_memory_region is used to store the text/data
> sections of the Device Manager (DM) firmware itself and is necessary for
> platform boot. Whereas the wkup_r5fss0_core0_dma_memory_region is used
> for allocating the Virtio buffers needed for IPC with the DM core which
> could be optional. The labels were incorrectly used in the
> k3-am62p-verdin.dtsi file. Correct the firmware memory region label.
>
> Currently, only mailbox node is enabled with FIFO assignment. However,
> there are no users of the enabled mailboxes. Add the missing carveouts
> for WKUP and MCU R5F remote processors, and enable those by associating
> to the above carveout and mailboxes. This config aligns with other AM62P
> boards and can be refactored out later.
>
> Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Verdin AM62P
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
next prev parent reply other threads:[~2025-09-09 2:29 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-08 14:27 [PATCH v4 00/34] Refactor TI IPC DT configs into dtsi Beleswar Padhi
2025-09-08 14:27 ` [PATCH v4 01/34] arm64: dts: ti: k3-j7200: Enable R5F remote processors at board level Beleswar Padhi
2025-09-08 14:27 ` [PATCH v4 02/34] arm64: dts: ti: k3-j721e: Enable " Beleswar Padhi
2025-09-08 14:27 ` [PATCH v4 03/34] arm64: dts: ti: k3-j721s2: " Beleswar Padhi
2025-09-08 14:27 ` [PATCH v4 04/34] arm64: dts: ti: k3-j784s4-j742s2: " Beleswar Padhi
2025-09-08 14:27 ` [PATCH v4 05/34] arm64: dts: ti: k3-am62p-j722s: " Beleswar Padhi
2025-09-08 14:27 ` [PATCH v4 06/34] arm64: dts: ti: k3-am62: " Beleswar Padhi
2025-09-08 14:27 ` [PATCH v4 07/34] arm64: dts: ti: k3-am62a: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 08/34] arm64: dts: ti: k3-am64: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 09/34] arm64: dts: ti: k3-am65: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 10/34] arm64: dts: ti: k3-am62: Enable Mailbox nodes at the " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 11/34] arm64: dts: ti: k3-am62a: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 12/34] arm64: dts: ti: k3-am6*-boards: Add label to reserved-memory node Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 13/34] arm64: dts: ti: k3: Rename rproc reserved-mem nodes to 'memory@addr' Beleswar Padhi
2025-09-08 19:23 ` Francesco Dolcini
2025-09-08 14:28 ` [PATCH v4 14/34] arm64: dts: ti: k3-j721e-beagleboneai64: Add missing cfg for TI IPC FW Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 15/34] arm64: dts: ti: k3-am62p-verdin: Add missing cfg for TI IPC Firmware Beleswar Padhi
2025-09-08 19:20 ` Francesco Dolcini [this message]
2025-09-08 14:28 ` [PATCH v4 16/34] arm64: dts: ti: k3-am62-verdin: " Beleswar Padhi
2025-09-08 19:21 ` Francesco Dolcini
2025-09-08 14:28 ` [PATCH v4 17/34] arm64: dts: ti: k3-am62-pocketbeagle2: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 18/34] arm64: dts: ti: k3-am642-sr-som: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 19/34] arm64: dts: ti: k3-am64-phycore-som: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 20/34] arm64: dts: ti: k3-am642-tqma64xxl: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 21/34] Revert "arm64: dts: ti: k3-j721e-sk: Fix reversed C6x carveout locations" Beleswar Padhi
2025-09-10 14:07 ` Andrew Davis
2025-09-08 14:28 ` [PATCH v4 22/34] Revert "arm64: dts: ti: k3-j721e-beagleboneai64: " Beleswar Padhi
2025-09-10 14:07 ` Andrew Davis
2025-09-08 14:28 ` [PATCH v4 23/34] arm64: dts: ti: k3-j721e-beagleboneai64: Switch MAIN R5F clusters to Split-mode Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 24/34] arm64: dts: ti: k3-j7200-ti-ipc-firmware: Refactor IPC cfg into new dtsi Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 25/34] arm64: dts: ti: k3-j721e-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 26/34] arm64: dts: ti: k3-j721s2-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 27/34] arm64: dts: ti: k3-j784s4-j742s2-ti-ipc-firmware-common: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 28/34] arm64: dts: ti: k3-j784s4-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 29/34] arm64: dts: ti: k3-j722s-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 30/34] arm64: dts: ti: k3-am62p-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 31/34] arm64: dts: ti: k3-am62-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 32/34] arm64: dts: ti: k3-am62a-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 33/34] arm64: dts: ti: k3-am64-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 14:28 ` [PATCH v4 34/34] arm64: dts: ti: k3-am65-ti-ipc-firmware: " Beleswar Padhi
2025-09-12 9:49 ` [PATCH v4 00/34] Refactor TI IPC DT configs into dtsi Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250908192035.GA4217@francesco-nb \
--to=francesco@dolcini.it \
--cc=afd@ti.com \
--cc=b-padhi@ti.com \
--cc=conor+dt@kernel.org \
--cc=d-gole@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=emanuele.ghidoli@toradex.com \
--cc=francesco.dolcini@toradex.com \
--cc=hiago.franco@toradex.com \
--cc=hnagalla@ti.com \
--cc=jm@ti.com \
--cc=joao.goncalves@toradex.com \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=parth.pancholi@toradex.com \
--cc=robh@kernel.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox