[PATCH] clk: sunxi-ng: sun6i-rtc: Add A523 specifics

[Chen-Yu Tsai <wens@kernel.org>]

From: Chen-Yu Tsai <wens@csie.org>

The A523's RTC block is backward compatible with the R329's, but it also
has a calibration function for its internal oscillator, which would
allow it to provide a clock rate closer to the desired 32.768 KHz. This
is useful on the Radxa Cubie A5E, which does not have an external 32.768
KHz crystal.

Add new compatible-specific data for it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/ccu-sun6i-rtc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c
index 0536e880b80f..f6bfeba009e8 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c
@@ -325,6 +325,13 @@ static const struct sun6i_rtc_match_data sun50i_r329_rtc_ccu_data = {
 	.osc32k_fanout_nparents	= ARRAY_SIZE(sun50i_r329_osc32k_fanout_parents),
 };
 
+static const struct sun6i_rtc_match_data sun55i_a523_rtc_ccu_data = {
+	.have_ext_osc32k	= true,
+	.have_iosc_calibration	= true,
+	.osc32k_fanout_parents	= sun50i_r329_osc32k_fanout_parents,
+	.osc32k_fanout_nparents	= ARRAY_SIZE(sun50i_r329_osc32k_fanout_parents),
+};
+
 static const struct of_device_id sun6i_rtc_ccu_match[] = {
 	{
 		.compatible	= "allwinner,sun50i-h616-rtc",
@@ -334,6 +341,10 @@ static const struct of_device_id sun6i_rtc_ccu_match[] = {
 		.compatible	= "allwinner,sun50i-r329-rtc",
 		.data		= &sun50i_r329_rtc_ccu_data,
 	},
+	{
+		.compatible	= "allwinner,sun55i-a523-rtc",
+		.data		= &sun55i_a523_rtc_ccu_data,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, sun6i_rtc_ccu_match);
-- 
2.39.5