From: "Tomáš Macholda" <tomas.macholda@nic.cz>
To: gregory.clement@bootlin.com
Cc: devicetree@vger.kernel.org, krzk+dt@kernel.org,
linux-arm-kernel@lists.infradead.org, robh@kernel.org,
kabel@kernel.org, michal.hrusecky@nic.cz,
"Tomáš Macholda" <tomas.macholda@nic.cz>
Subject: [PATCH v3 2/2] arm64: dts: marvell: add dts for RIPE Atlas Probe v5
Date: Thu, 11 Sep 2025 18:13:08 +0200 [thread overview]
Message-ID: <20250911161308.52876-3-tomas.macholda@nic.cz> (raw)
In-Reply-To: <20250911161308.52876-1-tomas.macholda@nic.cz>
internet measurement device based on Turris MOX
Signed-off-by: Tomáš Macholda <tomas.macholda@nic.cz>
---
arch/arm64/boot/dts/marvell/Makefile | 1 +
.../boot/dts/marvell/armada-3720-atlas-v5.dts | 110 ++++++++++++++++++
2 files changed, 111 insertions(+)
create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 40e5ac6cd468..a774bc74a0a0 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
# Mvebu SoC Family
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-atlas-v5.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts b/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts
new file mode 100644
index 000000000000..070d10a705bb
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for RIPE Atlas Probe v5
+ * 2025 by Marek Behún <kabel@kernel.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/bus/moxtet.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-372x.dtsi"
+
+/ {
+ model = "RIPE Atlas Probe v5";
+ compatible = "ripe,atlas-v5", "marvell,armada3720",
+ "marvell,armada3710";
+
+ aliases {
+ ethernet0 = ð0;
+ mmc0 = &sdhci0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led {
+ gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_ACTIVITY;
+ color = <LED_COLOR_ID_RED>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ vsdc_reg: vsdc-reg {
+ compatible = "regulator-gpio";
+ regulator-name = "vsdc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ enable-active-high;
+ };
+
+ firmware {
+ armada-3700-rwtm {
+ compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
+
+ð0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy1>;
+ status = "okay";
+};
+
+&sdhci0 {
+ non-removable;
+ bus-width = <4>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ sd-uhs-sdr104;
+ marvell,xenon-emmc;
+ marvell,xenon-tun-count = <9>;
+ marvell,pad-type = "fixed-1-8v";
+ vqmmc-supply = <&vsdc_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc_pins>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mmccard: mmccard@0 {
+ compatible = "mmc-card";
+ reg = <0>;
+ };
+};
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&smi_pins>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
--
2.47.3
next prev parent reply other threads:[~2025-09-11 16:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-11 16:13 [PATCH v3 0/2] Add support for RIPE Atlas Probe v5 Tomáš Macholda
2025-09-11 16:13 ` [PATCH v3 1/2] dt-bindings: marvell: armada-37xx: add ripe,atlas-v5 compatible Tomáš Macholda
2025-09-12 7:19 ` Krzysztof Kozlowski
2025-09-11 16:13 ` Tomáš Macholda [this message]
2025-09-12 7:18 ` [PATCH v3 0/2] Add support for RIPE Atlas Probe v5 Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250911161308.52876-3-tomas.macholda@nic.cz \
--to=tomas.macholda@nic.cz \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=kabel@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=michal.hrusecky@nic.cz \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox