From: Ravi Patel <ravi.patel@samsung.com>
To: krzk@kernel.org, s.nawrocki@samsung.com, alim.akhtar@samsung.com,
linus.walleij@linaro.org, robh@kernel.org, conor+dt@kernel.org
Cc: tomasz.figa@gmail.com, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
ksk4725@coasia.com, pjsin865@coasia.com, gwk1013@coasia.com,
bread@coasia.com, jspark@coasia.com, limjh0823@coasia.com,
lightwise@coasia.com, hgkim05@coasia.com, mingyoungbo@coasia.com,
smn1196@coasia.com, shradha.t@samsung.com, swathi.ks@samsung.com,
kenkim@coasia.com, Ravi Patel <ravi.patel@samsung.com>
Subject: [PATCH 2/2] pinctrl: samsung: Add ARTPEC-9 SoC specific configuration
Date: Wed, 17 Sep 2025 12:30:04 +0530 [thread overview]
Message-ID: <20250917070004.87872-3-ravi.patel@samsung.com> (raw)
In-Reply-To: <20250917070004.87872-1-ravi.patel@samsung.com>
From: SeonGu Kang <ksk4725@coasia.com>
Add Axis ARTPEC-9 SoC specific configuration data to enable pinctrl.
Signed-off-by: SeonGu Kang <ksk4725@coasia.com>
Signed-off-by: Ravi Patel <ravi.patel@samsung.com>
---
.../pinctrl/samsung/pinctrl-exynos-arm64.c | 49 +++++++++++++++++++
drivers/pinctrl/samsung/pinctrl-samsung.c | 2 +
drivers/pinctrl/samsung/pinctrl-samsung.h | 1 +
3 files changed, 52 insertions(+)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
index 323487dfa8c2..5a64fb428142 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
@@ -1866,3 +1866,52 @@ const struct samsung_pinctrl_of_match_data artpec8_of_data __initconst = {
.ctrl = artpec8_pin_ctrl,
.num_ctrl = ARRAY_SIZE(artpec8_pin_ctrl),
};
+
+/* pin banks of artpec9 pin-controller (FSYS0) */
+static const struct samsung_pin_bank_data artpec9_pin_banks0[] __initconst = {
+ ARTPEC_PIN_BANK_EINTG(8, 0x000, "gpf0", 0x00),
+ ARTPEC_PIN_BANK_EINTG(8, 0x020, "gpf1", 0x04),
+ ARTPEC_PIN_BANK_EINTG(8, 0x040, "gpe0", 0x08),
+ ARTPEC_PIN_BANK_EINTG(8, 0x060, "gpe1", 0x0c),
+ ARTPEC_PIN_BANK_EINTG(8, 0x080, "gpe2", 0x10),
+ ARTPEC_PIN_BANK_EINTG(8, 0x0a0, "gpe3", 0x14),
+ ARTPEC_PIN_BANK_EINTG(2, 0x0c0, "gpe4", 0x18),
+ ARTPEC_PIN_BANK_EINTG(8, 0x0e0, "gps0", 0x1c),
+ ARTPEC_PIN_BANK_EINTG(8, 0x100, "gps1", 0x20),
+ ARTPEC_PIN_BANK_EINTG(5, 0x120, "gpi0", 0x24),
+};
+
+/* pin banks of artpec9 pin-controller (FSYS1) */
+static const struct samsung_pin_bank_data artpec9_pin_banks1[] __initconst = {
+ ARTPEC_PIN_BANK_EINTG(2, 0x000, "gpu0", 0x00),
+};
+
+/* pin banks of artpec9 pin-controller (PERIC) */
+static const struct samsung_pin_bank_data artpec9_pin_banks2[] __initconst = {
+ ARTPEC_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
+ ARTPEC_PIN_BANK_EINTG(8, 0x020, "gpa1", 0x04),
+};
+
+static const struct samsung_pin_ctrl artpec9_pin_ctrl[] __initconst = {
+ {
+ /* pin-controller instance 0 FSYS0 data */
+ .pin_banks = artpec9_pin_banks0,
+ .nr_banks = ARRAY_SIZE(artpec9_pin_banks0),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ }, {
+ /* pin-controller instance 1 FSYS1 data */
+ .pin_banks = artpec9_pin_banks1,
+ .nr_banks = ARRAY_SIZE(artpec9_pin_banks1),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ }, {
+ /* pin-controller instance 2 PERIC data */
+ .pin_banks = artpec9_pin_banks2,
+ .nr_banks = ARRAY_SIZE(artpec9_pin_banks2),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ },
+};
+
+const struct samsung_pinctrl_of_match_data artpec9_of_data __initconst = {
+ .ctrl = artpec9_pin_ctrl,
+ .num_ctrl = ARRAY_SIZE(artpec9_pin_ctrl),
+};
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index c099195fc464..1d978443bd1b 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1484,6 +1484,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
#ifdef CONFIG_PINCTRL_EXYNOS_ARM64
{ .compatible = "axis,artpec8-pinctrl",
.data = &artpec8_of_data },
+ { .compatible = "axis,artpec9-pinctrl",
+ .data = &artpec9_of_data },
{ .compatible = "google,gs101-pinctrl",
.data = &gs101_of_data },
{ .compatible = "samsung,exynos2200-pinctrl",
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index 3e8ef91d94a3..94334bd860ca 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -382,6 +382,7 @@ struct samsung_pmx_func {
/* list of all exported SoC specific data */
extern const struct samsung_pinctrl_of_match_data artpec8_of_data;
+extern const struct samsung_pinctrl_of_match_data artpec9_of_data;
extern const struct samsung_pinctrl_of_match_data exynos2200_of_data;
extern const struct samsung_pinctrl_of_match_data exynos3250_of_data;
extern const struct samsung_pinctrl_of_match_data exynos4210_of_data;
--
2.17.1
next prev parent reply other threads:[~2025-09-17 7:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20250917070036epcas5p15db06286fc187651574b68ea4ebe5edb@epcas5p1.samsung.com>
2025-09-17 7:00 ` [PATCH 0/2] Add pinctrl support for the Axis ARTPEC-9 SoC Ravi Patel
2025-09-17 7:00 ` [PATCH 1/2] dt-bindings: pinctrl: samsung: Add compatible for " Ravi Patel
2025-09-17 19:29 ` Conor Dooley
2025-09-17 7:00 ` Ravi Patel [this message]
2025-10-13 1:03 ` [PATCH 0/2] Add pinctrl support for the Axis " Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250917070004.87872-3-ravi.patel@samsung.com \
--to=ravi.patel@samsung.com \
--cc=alim.akhtar@samsung.com \
--cc=bread@coasia.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gwk1013@coasia.com \
--cc=hgkim05@coasia.com \
--cc=jspark@coasia.com \
--cc=kenkim@coasia.com \
--cc=krzk@kernel.org \
--cc=ksk4725@coasia.com \
--cc=lightwise@coasia.com \
--cc=limjh0823@coasia.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mingyoungbo@coasia.com \
--cc=pjsin865@coasia.com \
--cc=robh@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=shradha.t@samsung.com \
--cc=smn1196@coasia.com \
--cc=swathi.ks@samsung.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox