[PATCH 2/2] arm64: dts: meson: add initial device-tree for Tanix TX9 Pro

[Christian Hewitt <christianshewitt@gmail.com>]

Oranth Tanix TX9 Pro is based on the Amlogic Q200 reference design with
an S912 chip and the following specs:

- 3GB DDR3 RAM
- 32GB eMMC
- 10/100/1000 Base-T Ethernet
- AP6356 Wireless (802.11 b/g/n/ac, BT 5.0)
- HDMI 2.0a video
- VFD for clock/status
- 2x USB 2.0 ports
- IR receiver
- 1x Power LED (white)
- 1x Update/Reset button (underside)
- 1x micro SD card slot

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
Checkpatch generates the 'phy-mode "rgmii" without comment'
warning but this dts is using the same rgmii format as all
other Amlogic boards, so I have omitted a comment.

 arch/arm64/boot/dts/amlogic/Makefile          |  1 +
 .../boot/dts/amlogic/meson-gxm-tx9-pro.dts    | 90 +++++++++++++++++++
 2 files changed, 91 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-tx9-pro.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 619dce79b020..219fb088c704 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-tx9-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-ugoos-am3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-tx9-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-tx9-pro.dts
new file mode 100644
index 000000000000..9a62176cfe5a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-tx9-pro.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "oranth,tx9-pro", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Tanix TX9 Pro";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
-- 
2.34.1