[PATCH v2 0/8] net: stmmac: qcom-ethqos: add support for SCMI power domains

[PATCH v2 0/8] net: stmmac: qcom-ethqos: add support for SCMI power domains

[Bartosz Golaszewski]

Add support for the firmware-managed variant of the DesignWare MAC on
the sa8255p platform. This series contains new DT bindings and driver
changes required to support the MAC in the STMMAC driver.

It also reorganizes the ethqos code quite a bit to make the introduction
of power domains into the driver a bit easier on the eye.

The DTS changes will go in separately.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
Changes in v2:
- Fix the power-domains property in DT bindings
- Rework the DT bindings example
- Drop the DTS patch, it will go upstream separately
- Link to v1: https://lore.kernel.org/r/20250910-qcom-sa8255p-emac-v1-0-32a79cf1e668@linaro.org

---
Bartosz Golaszewski (8):
      dt-bindings: net: qcom: document the ethqos device for SCMI-based systems
      net: stmmac: qcom-ethqos: use generic device properties
      net: stmmac: qcom-ethqos: improve typing in devres callback
      net: stmmac: qcom-ethqos: wrap emac driver data in additional structure
      net: stmmac: qcom-ethqos: split power management fields into a separate structure
      net: stmmac: qcom-ethqos: split power management context into a separate struct
      net: stmmac: qcom-ethqos: define a callback for setting the serdes speed
      net: stmmac: qcom-ethqos: add support for sa8255p

 .../devicetree/bindings/net/qcom,ethqos-scmi.yaml  | 101 ++++++
 .../devicetree/bindings/net/snps,dwmac.yaml        |   5 +-
 MAINTAINERS                                        |   1 +
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |   2 +-
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 345 +++++++++++++++++----
 5 files changed, 389 insertions(+), 65 deletions(-)
---
base-commit: fb6c63cf2231e895e4b0b4f3586cc0729f71f909
change-id: 20250704-qcom-sa8255p-emac-8460235ac512

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

[PATCH v2 1/8] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Describe the firmware-managed variant of the QCom DesignWare MAC. As the
properties here differ a lot from the HLOS-managed variant, lets put it
in a separate file.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 .../devicetree/bindings/net/qcom,ethqos-scmi.yaml  | 101 +++++++++++++++++++++
 .../devicetree/bindings/net/snps,dwmac.yaml        |   5 +-
 MAINTAINERS                                        |   1 +
 3 files changed, 106 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos-scmi.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos-scmi.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..0a9cc789085e8bc94d44adc9da982b66071d1e79
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos-scmi.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ethqos-scmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Ethernet ETHQOS device (firmware managed)
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+  dwmmac based Qualcomm ethernet devices which support Gigabit
+  ethernet (version v2.3.0 and onwards) with clocks, interconnects, etc.
+  managed by firmware
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    const: qcom,sa8255p-ethqos
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: stmmaceth
+      - const: rgmii
+
+  interrupts:
+    items:
+      - description: Combined signal for various interrupt events
+      - description: The interrupt that occurs when HW safety error triggered
+
+  interrupt-names:
+    items:
+      - const: macirq
+      - const: sfty
+
+  power-domains:
+    minItems: 3
+
+  power-domain-names:
+    items:
+      - const: power_core
+      - const: power_mdio
+      - const: perf_serdes
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  phys: true
+
+  phy-names:
+    const: serdes
+
+required:
+  - compatible
+  - reg-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet: ethernet@7a80000 {
+        compatible = "qcom,sa8255p-ethqos";
+        reg = <0x23040000 0x10000>,
+              <0x23056000 0x100>;
+        reg-names = "stmmaceth", "rgmii";
+
+        iommus = <&apps_smmu 0x120 0x7>;
+
+        interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "macirq", "sfty";
+
+        dma-coherent;
+
+        snps,tso;
+        snps,pbl = <32>;
+        rx-fifo-depth = <16384>;
+        tx-fifo-depth = <16384>;
+
+        phy-handle = <&ethernet_phy>;
+        phy-mode = "2500base-x";
+
+        snps,mtl-rx-config = <&mtl_rx_setup1>;
+        snps,mtl-tx-config = <&mtl_tx_setup1>;
+
+        power-domains = <&scmi8_pd 0>, <&scmi8_pd 1>, <&scmi8_dvfs 0>;
+        power-domain-names = "power_core", "power_mdio","perf_serdes";
+    };
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 658c004e6a5c836bcc1dca109a251e27af6e23ca..5ef5c28d0337050268e76cdd787b4cd6de7fb0e2 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -71,6 +71,7 @@ properties:
         - loongson,ls7a-dwmac
         - nxp,s32g2-dwmac
         - qcom,qcs404-ethqos
+        - qcom,sa8255p-ethqos
         - qcom,sa8775p-ethqos
         - qcom,sc8280xp-ethqos
         - qcom,sm8150-ethqos
@@ -176,7 +177,8 @@ properties:
           - const: ahb
 
   power-domains:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
 
   mac-mode:
     $ref: ethernet-controller.yaml#/properties/phy-connection-type
@@ -639,6 +641,7 @@ allOf:
                 - ingenic,x1830-mac
                 - ingenic,x2000-mac
                 - qcom,qcs404-ethqos
+                - qcom,sa8255p-ethqos
                 - qcom,sa8775p-ethqos
                 - qcom,sc8280xp-ethqos
                 - qcom,sm8150-ethqos
diff --git a/MAINTAINERS b/MAINTAINERS
index 3773c74b31d6d9d4c2f9ba53c4b3ecf3e4e2dd79..cb097a1369d08e708152a3a41b610b35273cebea 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -21096,6 +21096,7 @@ M:	Vinod Koul <vkoul@kernel.org>
 L:	netdev@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/net/qcom,ethqos-scmi.yaml
 F:	Documentation/devicetree/bindings/net/qcom,ethqos.yaml
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
 

-- 
2.48.1

Re: [PATCH v2 1/8] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems

[Rob Herring]

On Wed, Oct 08, 2025 at 10:17:48AM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Describe the firmware-managed variant of the QCom DesignWare MAC. As the
> properties here differ a lot from the HLOS-managed variant, lets put it
> in a separate file.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
>  .../devicetree/bindings/net/qcom,ethqos-scmi.yaml  | 101 +++++++++++++++++++++
>  .../devicetree/bindings/net/snps,dwmac.yaml        |   5 +-
>  MAINTAINERS                                        |   1 +
>  3 files changed, 106 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos-scmi.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos-scmi.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..0a9cc789085e8bc94d44adc9da982b66071d1e79
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/qcom,ethqos-scmi.yaml
> @@ -0,0 +1,101 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/qcom,ethqos-scmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Ethernet ETHQOS device (firmware managed)
> +
> +maintainers:
> +  - Bjorn Andersson <andersson@kernel.org>
> +  - Konrad Dybcio <konradybcio@kernel.org>
> +  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> +
> +description:
> +  dwmmac based Qualcomm ethernet devices which support Gigabit
> +  ethernet (version v2.3.0 and onwards) with clocks, interconnects, etc.
> +  managed by firmware
> +
> +allOf:
> +  - $ref: snps,dwmac.yaml#
> +
> +properties:
> +  compatible:
> +    const: qcom,sa8255p-ethqos
> +
> +  reg:
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: stmmaceth
> +      - const: rgmii
> +
> +  interrupts:
> +    items:
> +      - description: Combined signal for various interrupt events
> +      - description: The interrupt that occurs when HW safety error triggered
> +
> +  interrupt-names:
> +    items:
> +      - const: macirq
> +      - const: sfty
> +
> +  power-domains:
> +    minItems: 3
> +
> +  power-domain-names:
> +    items:
> +      - const: power_core
> +      - const: power_mdio
> +      - const: perf_serdes

I would drop power and perf. I don't want to know about the abusing of 
the power-domain binding.

Rob

[PATCH v2 2/8] net: stmmac: qcom-ethqos: use generic device properties

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

In order to drop the dependency on CONFIG_OF, convert all device property
getters from OF-specific to generic device properties and stop pulling
in any linux/of.h symbols.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig             | 2 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 9 ++++-----
 2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 9507131875b2ca05fedcab95a3bb4c7f8e8810fc..7734acc6f1dd669ffec622812f48d355c507fc32 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -125,7 +125,7 @@ config DWMAC_MESON
 config DWMAC_QCOM_ETHQOS
 	tristate "Qualcomm ETHQOS support"
 	default ARCH_QCOM
-	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	depends on ARCH_QCOM || COMPILE_TEST
 	help
 	  Support for the Qualcomm ETHQOS core.
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index d8fd4d8f6ced76cbe198f3d3443084daee151b04..aa4715bc0b3e7ebb8534f6456c29991d2ab3f917 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (c) 2018-19, Linaro Limited
 
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/of.h>
 #include <linux/of_net.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
@@ -764,7 +764,6 @@ static void ethqos_ptp_clk_freq_config(struct stmmac_priv *priv)
 
 static int qcom_ethqos_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	const struct ethqos_emac_driver_data *data;
 	struct plat_stmmacenet_data *plat_dat;
 	struct stmmac_resources stmmac_res;
@@ -815,7 +814,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 
 	ethqos->mac_base = stmmac_res.addr;
 
-	data = of_device_get_match_data(dev);
+	data = device_get_match_data(dev);
 	ethqos->por = data->por;
 	ethqos->num_por = data->num_por;
 	ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en;
@@ -852,9 +851,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	if (ethqos->has_emac_ge_3)
 		plat_dat->dwmac4_addrs = &data->dwmac4_addrs;
 	plat_dat->pmt = 1;
-	if (of_property_read_bool(np, "snps,tso"))
+	if (device_property_present(dev, "snps,tso"))
 		plat_dat->flags |= STMMAC_FLAG_TSO_EN;
-	if (of_device_is_compatible(np, "qcom,qcs404-ethqos"))
+	if (device_is_compatible(dev, "qcom,qcs404-ethqos"))
 		plat_dat->flags |= STMMAC_FLAG_RX_CLK_RUNS_IN_LPI;
 	if (data->has_integrated_pcs)
 		plat_dat->flags |= STMMAC_FLAG_HAS_INTEGRATED_PCS;

-- 
2.48.1

[PATCH v2 3/8] net: stmmac: qcom-ethqos: improve typing in devres callback

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

It's bad practice to just directly pass void pointers to functions which
expect concrete types. Make it more clear what type ethqos_clks_config()
expects.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index aa4715bc0b3e7ebb8534f6456c29991d2ab3f917..0381026af0fd8baaefa767f7e0ef33efe41b0aa4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -742,7 +742,9 @@ static int ethqos_clks_config(void *priv, bool enabled)
 
 static void ethqos_clks_disable(void *data)
 {
-	ethqos_clks_config(data, false);
+	struct qcom_ethqos *ethqos = data;
+
+	ethqos_clks_config(ethqos, false);
 }
 
 static void ethqos_ptp_clk_freq_config(struct stmmac_priv *priv)

-- 
2.48.1

[PATCH v2 4/8] net: stmmac: qcom-ethqos: wrap emac driver data in additional structure

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

As the first step in enabling power domain support in the driver, we'll
split the device match data and runtime data structures into their
general and power-management-specific parts. To allow that: first wrap
the emac driver data in another layer which will later be expanded.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 53 ++++++++++++++++------
 1 file changed, 38 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 0381026af0fd8baaefa767f7e0ef33efe41b0aa4..dcee5c161c01124ea6bf36ceaeca4cc8ca29c5d5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -102,6 +102,10 @@ struct ethqos_emac_driver_data {
 	bool needs_sgmii_loopback;
 };
 
+struct ethqos_emac_match_data {
+	const struct ethqos_emac_driver_data *drv_data;
+};
+
 struct qcom_ethqos {
 	struct platform_device *pdev;
 	void __iomem *rgmii_base;
@@ -219,6 +223,10 @@ static const struct ethqos_emac_driver_data emac_v2_3_0_data = {
 	.has_emac_ge_3 = false,
 };
 
+static const struct ethqos_emac_match_data emac_qcs404_data = {
+	.drv_data = &emac_v2_3_0_data,
+};
+
 static const struct ethqos_emac_por emac_v2_1_0_por[] = {
 	{ .offset = RGMII_IO_MACRO_CONFIG,	.value = 0x40C01343 },
 	{ .offset = SDCC_HC_REG_DLL_CONFIG,	.value = 0x2004642C },
@@ -235,6 +243,10 @@ static const struct ethqos_emac_driver_data emac_v2_1_0_data = {
 	.has_emac_ge_3 = false,
 };
 
+static const struct ethqos_emac_match_data emac_sm8150_data = {
+	.drv_data = &emac_v2_1_0_data,
+};
+
 static const struct ethqos_emac_por emac_v3_0_0_por[] = {
 	{ .offset = RGMII_IO_MACRO_CONFIG,	.value = 0x40c01343 },
 	{ .offset = SDCC_HC_REG_DLL_CONFIG,	.value = 0x2004642c },
@@ -267,6 +279,10 @@ static const struct ethqos_emac_driver_data emac_v3_0_0_data = {
 	},
 };
 
+static const struct ethqos_emac_match_data emac_sc8280xp_data = {
+	.drv_data = &emac_v3_0_0_data,
+};
+
 static const struct ethqos_emac_por emac_v4_0_0_por[] = {
 	{ .offset = RGMII_IO_MACRO_CONFIG,	.value = 0x40c01343 },
 	{ .offset = SDCC_HC_REG_DLL_CONFIG,	.value = 0x2004642c },
@@ -303,6 +319,10 @@ static const struct ethqos_emac_driver_data emac_v4_0_0_data = {
 	},
 };
 
+static const struct ethqos_emac_match_data emac_sa8775p_data = {
+	.drv_data = &emac_v4_0_0_data,
+};
+
 static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 {
 	struct device *dev = &ethqos->pdev->dev;
@@ -766,7 +786,8 @@ static void ethqos_ptp_clk_freq_config(struct stmmac_priv *priv)
 
 static int qcom_ethqos_probe(struct platform_device *pdev)
 {
-	const struct ethqos_emac_driver_data *data;
+	const struct ethqos_emac_driver_data *drv_data;
+	const struct ethqos_emac_match_data *data;
 	struct plat_stmmacenet_data *plat_dat;
 	struct stmmac_resources stmmac_res;
 	struct device *dev = &pdev->dev;
@@ -817,13 +838,15 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	ethqos->mac_base = stmmac_res.addr;
 
 	data = device_get_match_data(dev);
-	ethqos->por = data->por;
-	ethqos->num_por = data->num_por;
-	ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en;
-	ethqos->has_emac_ge_3 = data->has_emac_ge_3;
-	ethqos->needs_sgmii_loopback = data->needs_sgmii_loopback;
+	drv_data = data->drv_data;
 
-	ethqos->link_clk = devm_clk_get(dev, data->link_clk_name ?: "rgmii");
+	ethqos->por = drv_data->por;
+	ethqos->num_por = drv_data->num_por;
+	ethqos->rgmii_config_loopback_en = drv_data->rgmii_config_loopback_en;
+	ethqos->has_emac_ge_3 = drv_data->has_emac_ge_3;
+	ethqos->needs_sgmii_loopback = drv_data->needs_sgmii_loopback;
+
+	ethqos->link_clk = devm_clk_get(dev, drv_data->link_clk_name ?: "rgmii");
 	if (IS_ERR(ethqos->link_clk))
 		return dev_err_probe(dev, PTR_ERR(ethqos->link_clk),
 				     "Failed to get link_clk\n");
@@ -851,16 +874,16 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	plat_dat->ptp_clk_freq_config = ethqos_ptp_clk_freq_config;
 	plat_dat->has_gmac4 = 1;
 	if (ethqos->has_emac_ge_3)
-		plat_dat->dwmac4_addrs = &data->dwmac4_addrs;
+		plat_dat->dwmac4_addrs = &drv_data->dwmac4_addrs;
 	plat_dat->pmt = 1;
 	if (device_property_present(dev, "snps,tso"))
 		plat_dat->flags |= STMMAC_FLAG_TSO_EN;
 	if (device_is_compatible(dev, "qcom,qcs404-ethqos"))
 		plat_dat->flags |= STMMAC_FLAG_RX_CLK_RUNS_IN_LPI;
-	if (data->has_integrated_pcs)
+	if (drv_data->has_integrated_pcs)
 		plat_dat->flags |= STMMAC_FLAG_HAS_INTEGRATED_PCS;
-	if (data->dma_addr_width)
-		plat_dat->host_dma_width = data->dma_addr_width;
+	if (drv_data->dma_addr_width)
+		plat_dat->host_dma_width = drv_data->dma_addr_width;
 
 	if (ethqos->serdes_phy) {
 		plat_dat->serdes_powerup = qcom_ethqos_serdes_powerup;
@@ -875,10 +898,10 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id qcom_ethqos_match[] = {
-	{ .compatible = "qcom,qcs404-ethqos", .data = &emac_v2_3_0_data},
-	{ .compatible = "qcom,sa8775p-ethqos", .data = &emac_v4_0_0_data},
-	{ .compatible = "qcom,sc8280xp-ethqos", .data = &emac_v3_0_0_data},
-	{ .compatible = "qcom,sm8150-ethqos", .data = &emac_v2_1_0_data},
+	{ .compatible = "qcom,qcs404-ethqos", .data = &emac_qcs404_data},
+	{ .compatible = "qcom,sa8775p-ethqos", .data = &emac_sa8775p_data},
+	{ .compatible = "qcom,sc8280xp-ethqos", .data = &emac_sc8280xp_data},
+	{ .compatible = "qcom,sm8150-ethqos", .data = &emac_sm8150_data},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_ethqos_match);

-- 
2.48.1

[PATCH v2 5/8] net: stmmac: qcom-ethqos: split power management fields into a separate structure

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Now that we have a separate wrapper for device match data, let's extend
this structure with a pointer to the structure containing fields related
to power-management only. This is done because a device may have the
same device settings but different power management mode (e.g.: firmware
vs manual).

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 .../net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c   | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index dcee5c161c01124ea6bf36ceaeca4cc8ca29c5d5..d4ddf1c5c1bca2ae1fc5ec38a4ac244e1677482e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -95,15 +95,19 @@ struct ethqos_emac_driver_data {
 	unsigned int num_por;
 	bool rgmii_config_loopback_en;
 	bool has_emac_ge_3;
-	const char *link_clk_name;
 	bool has_integrated_pcs;
 	u32 dma_addr_width;
 	struct dwmac4_addrs dwmac4_addrs;
 	bool needs_sgmii_loopback;
 };
 
+struct ethqos_emac_pm_data {
+	const char *link_clk_name;
+};
+
 struct ethqos_emac_match_data {
 	const struct ethqos_emac_driver_data *drv_data;
+	const struct ethqos_emac_pm_data *pm_data;
 };
 
 struct qcom_ethqos {
@@ -297,7 +301,6 @@ static const struct ethqos_emac_driver_data emac_v4_0_0_data = {
 	.num_por = ARRAY_SIZE(emac_v4_0_0_por),
 	.rgmii_config_loopback_en = false,
 	.has_emac_ge_3 = true,
-	.link_clk_name = "phyaux",
 	.has_integrated_pcs = true,
 	.needs_sgmii_loopback = true,
 	.dma_addr_width = 36,
@@ -319,8 +322,13 @@ static const struct ethqos_emac_driver_data emac_v4_0_0_data = {
 	},
 };
 
+static const struct ethqos_emac_pm_data emac_sa8775p_pm_data = {
+	.link_clk_name = "phyaux",
+};
+
 static const struct ethqos_emac_match_data emac_sa8775p_data = {
 	.drv_data = &emac_v4_0_0_data,
+	.pm_data = &emac_sa8775p_pm_data,
 };
 
 static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
@@ -787,11 +795,13 @@ static void ethqos_ptp_clk_freq_config(struct stmmac_priv *priv)
 static int qcom_ethqos_probe(struct platform_device *pdev)
 {
 	const struct ethqos_emac_driver_data *drv_data;
+	const struct ethqos_emac_pm_data *pm_data;
 	const struct ethqos_emac_match_data *data;
 	struct plat_stmmacenet_data *plat_dat;
 	struct stmmac_resources stmmac_res;
 	struct device *dev = &pdev->dev;
 	struct qcom_ethqos *ethqos;
+	const char *clk_name;
 	int ret, i;
 
 	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
@@ -839,6 +849,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 
 	data = device_get_match_data(dev);
 	drv_data = data->drv_data;
+	pm_data = data->pm_data;
+	clk_name = pm_data && pm_data->link_clk_name ?
+				pm_data->link_clk_name : "rgmii";
 
 	ethqos->por = drv_data->por;
 	ethqos->num_por = drv_data->num_por;
@@ -846,7 +859,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	ethqos->has_emac_ge_3 = drv_data->has_emac_ge_3;
 	ethqos->needs_sgmii_loopback = drv_data->needs_sgmii_loopback;
 
-	ethqos->link_clk = devm_clk_get(dev, drv_data->link_clk_name ?: "rgmii");
+	ethqos->link_clk = devm_clk_get(dev, clk_name);
 	if (IS_ERR(ethqos->link_clk))
 		return dev_err_probe(dev, PTR_ERR(ethqos->link_clk),
 				     "Failed to get link_clk\n");

-- 
2.48.1

[PATCH v2 6/8] net: stmmac: qcom-ethqos: split power management context into a separate struct

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

With match data split into general and power-management sections, let's
now do the same with runtime device data.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 46 ++++++++++++----------
 1 file changed, 25 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index d4ddf1c5c1bca2ae1fc5ec38a4ac244e1677482e..1fec3aa62f0f01b29cdbc4a5887dbaa0c3c60fcd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -110,17 +110,21 @@ struct ethqos_emac_match_data {
 	const struct ethqos_emac_pm_data *pm_data;
 };
 
+struct ethqos_emac_pm_ctx {
+	struct clk *link_clk;
+	unsigned int link_clk_rate;
+	struct phy *serdes_phy;
+};
+
 struct qcom_ethqos {
 	struct platform_device *pdev;
 	void __iomem *rgmii_base;
 	void __iomem *mac_base;
 	int (*configure_func)(struct qcom_ethqos *ethqos, int speed);
 
-	unsigned int link_clk_rate;
-	struct clk *link_clk;
-	struct phy *serdes_phy;
-	int serdes_speed;
+	struct ethqos_emac_pm_ctx pm;
 	phy_interface_t phy_mode;
+	int serdes_speed;
 
 	const struct ethqos_emac_por *por;
 	unsigned int num_por;
@@ -186,9 +190,9 @@ ethqos_update_link_clk(struct qcom_ethqos *ethqos, int speed)
 
 	rate = rgmii_clock(speed);
 	if (rate > 0)
-		ethqos->link_clk_rate = rate * 2;
+		ethqos->pm.link_clk_rate = rate * 2;
 
-	clk_set_rate(ethqos->link_clk, ethqos->link_clk_rate);
+	clk_set_rate(ethqos->pm.link_clk, ethqos->pm.link_clk_rate);
 }
 
 static void
@@ -645,7 +649,7 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos, int speed)
 static void ethqos_set_serdes_speed(struct qcom_ethqos *ethqos, int speed)
 {
 	if (ethqos->serdes_speed != speed) {
-		phy_set_speed(ethqos->serdes_phy, speed);
+		phy_set_speed(ethqos->pm.serdes_phy, speed);
 		ethqos->serdes_speed = speed;
 	}
 }
@@ -724,23 +728,23 @@ static int qcom_ethqos_serdes_powerup(struct net_device *ndev, void *priv)
 	struct qcom_ethqos *ethqos = priv;
 	int ret;
 
-	ret = phy_init(ethqos->serdes_phy);
+	ret = phy_init(ethqos->pm.serdes_phy);
 	if (ret)
 		return ret;
 
-	ret = phy_power_on(ethqos->serdes_phy);
+	ret = phy_power_on(ethqos->pm.serdes_phy);
 	if (ret)
 		return ret;
 
-	return phy_set_speed(ethqos->serdes_phy, ethqos->serdes_speed);
+	return phy_set_speed(ethqos->pm.serdes_phy, ethqos->serdes_speed);
 }
 
 static void qcom_ethqos_serdes_powerdown(struct net_device *ndev, void *priv)
 {
 	struct qcom_ethqos *ethqos = priv;
 
-	phy_power_off(ethqos->serdes_phy);
-	phy_exit(ethqos->serdes_phy);
+	phy_power_off(ethqos->pm.serdes_phy);
+	phy_exit(ethqos->pm.serdes_phy);
 }
 
 static int ethqos_clks_config(void *priv, bool enabled)
@@ -749,7 +753,7 @@ static int ethqos_clks_config(void *priv, bool enabled)
 	int ret = 0;
 
 	if (enabled) {
-		ret = clk_prepare_enable(ethqos->link_clk);
+		ret = clk_prepare_enable(ethqos->pm.link_clk);
 		if (ret) {
 			dev_err(&ethqos->pdev->dev, "link_clk enable failed\n");
 			return ret;
@@ -762,7 +766,7 @@ static int ethqos_clks_config(void *priv, bool enabled)
 		 */
 		ethqos_set_func_clk_en(ethqos);
 	} else {
-		clk_disable_unprepare(ethqos->link_clk);
+		clk_disable_unprepare(ethqos->pm.link_clk);
 	}
 
 	return ret;
@@ -859,9 +863,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	ethqos->has_emac_ge_3 = drv_data->has_emac_ge_3;
 	ethqos->needs_sgmii_loopback = drv_data->needs_sgmii_loopback;
 
-	ethqos->link_clk = devm_clk_get(dev, clk_name);
-	if (IS_ERR(ethqos->link_clk))
-		return dev_err_probe(dev, PTR_ERR(ethqos->link_clk),
+	ethqos->pm.link_clk = devm_clk_get(dev, clk_name);
+	if (IS_ERR(ethqos->pm.link_clk))
+		return dev_err_probe(dev, PTR_ERR(ethqos->pm.link_clk),
 				     "Failed to get link_clk\n");
 
 	ret = ethqos_clks_config(ethqos, true);
@@ -872,9 +876,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ethqos->serdes_phy = devm_phy_optional_get(dev, "serdes");
-	if (IS_ERR(ethqos->serdes_phy))
-		return dev_err_probe(dev, PTR_ERR(ethqos->serdes_phy),
+	ethqos->pm.serdes_phy = devm_phy_optional_get(dev, "serdes");
+	if (IS_ERR(ethqos->pm.serdes_phy))
+		return dev_err_probe(dev, PTR_ERR(ethqos->pm.serdes_phy),
 				     "Failed to get serdes phy\n");
 
 	ethqos->serdes_speed = SPEED_1000;
@@ -898,7 +902,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	if (drv_data->dma_addr_width)
 		plat_dat->host_dma_width = drv_data->dma_addr_width;
 
-	if (ethqos->serdes_phy) {
+	if (ethqos->pm.serdes_phy) {
 		plat_dat->serdes_powerup = qcom_ethqos_serdes_powerup;
 		plat_dat->serdes_powerdown  = qcom_ethqos_serdes_powerdown;
 	}

-- 
2.48.1

[PATCH v2 7/8] net: stmmac: qcom-ethqos: define a callback for setting the serdes speed

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Ahead of adding support for firmware driven power management, let's
allow different ways of setting the PHY speed. To that end create a
callback with a single implementation for now, that will be extended
later.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 1fec3aa62f0f01b29cdbc4a5887dbaa0c3c60fcd..2a6136a663268ed40f99b47c9f0694f30053b94a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -125,6 +125,7 @@ struct qcom_ethqos {
 	struct ethqos_emac_pm_ctx pm;
 	phy_interface_t phy_mode;
 	int serdes_speed;
+	int (*set_serdes_speed)(struct qcom_ethqos *ethqos);
 
 	const struct ethqos_emac_por *por;
 	unsigned int num_por;
@@ -646,11 +647,16 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos, int speed)
 	return 0;
 }
 
+static int ethqos_set_serdes_speed_phy(struct qcom_ethqos *ethqos)
+{
+	return phy_set_speed(ethqos->pm.serdes_phy, ethqos->serdes_speed);
+}
+
 static void ethqos_set_serdes_speed(struct qcom_ethqos *ethqos, int speed)
 {
 	if (ethqos->serdes_speed != speed) {
-		phy_set_speed(ethqos->pm.serdes_phy, speed);
 		ethqos->serdes_speed = speed;
+		ethqos->set_serdes_speed(ethqos);
 	}
 }
 
@@ -881,6 +887,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(ethqos->pm.serdes_phy),
 				     "Failed to get serdes phy\n");
 
+	ethqos->set_serdes_speed = ethqos_set_serdes_speed_phy;
 	ethqos->serdes_speed = SPEED_1000;
 	ethqos_update_link_clk(ethqos, SPEED_1000);
 	ethqos_set_func_clk_en(ethqos);

-- 
2.48.1

[PATCH v2 8/8] net: stmmac: qcom-ethqos: add support for sa8255p

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Extend the driver to support a new model - sa8255p. Unlike the
previously supported variants, this one's power management is done in
the firmware using SCMI. This is modeled in linux using power domains so
add support for them.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 231 ++++++++++++++++++---
 1 file changed, 201 insertions(+), 30 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 2a6136a663268ed40f99b47c9f0694f30053b94a..e1620d724e18dd824ae9615dfef122836e5140fd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -7,6 +7,8 @@
 #include <linux/platform_device.h>
 #include <linux/phy.h>
 #include <linux/phy/phy.h>
+#include <linux/pm_opp.h>
+#include <linux/pm_domain.h>
 
 #include "stmmac.h"
 #include "stmmac_platform.h"
@@ -85,6 +87,13 @@
 
 #define SGMII_10M_RX_CLK_DVDR			0x31
 
+enum ethqos_pd_selector {
+	ETHQOS_PD_CORE = 0,
+	ETHQOS_PD_MDIO,
+	ETHQOS_PD_SERDES,
+	ETHQOS_NUM_PDS,
+};
+
 struct ethqos_emac_por {
 	unsigned int offset;
 	unsigned int value;
@@ -103,6 +112,9 @@ struct ethqos_emac_driver_data {
 
 struct ethqos_emac_pm_data {
 	const char *link_clk_name;
+	bool use_domains;
+	struct dev_pm_domain_attach_data pd;
+	unsigned int clk_ptp_rate;
 };
 
 struct ethqos_emac_match_data {
@@ -116,13 +128,20 @@ struct ethqos_emac_pm_ctx {
 	struct phy *serdes_phy;
 };
 
+struct ethqos_emac_pd_ctx {
+	struct dev_pm_domain_list *pd_list;
+};
+
 struct qcom_ethqos {
 	struct platform_device *pdev;
 	void __iomem *rgmii_base;
 	void __iomem *mac_base;
 	int (*configure_func)(struct qcom_ethqos *ethqos, int speed);
 
-	struct ethqos_emac_pm_ctx pm;
+	union {
+		struct ethqos_emac_pm_ctx pm;
+		struct ethqos_emac_pd_ctx pd;
+	};
 	phy_interface_t phy_mode;
 	int serdes_speed;
 	int (*set_serdes_speed)(struct qcom_ethqos *ethqos);
@@ -336,6 +355,25 @@ static const struct ethqos_emac_match_data emac_sa8775p_data = {
 	.pm_data = &emac_sa8775p_pm_data,
 };
 
+static const char * const emac_sa8255p_pd_names[] = {
+	"power_core", "power_mdio", "perf_serdes"
+};
+
+static const struct ethqos_emac_pm_data emac_sa8255p_pm_data = {
+	.pd = {
+		.pd_flags = PD_FLAG_NO_DEV_LINK,
+		.pd_names = emac_sa8255p_pd_names,
+		.num_pd_names = ETHQOS_NUM_PDS,
+	},
+	.use_domains = true,
+	.clk_ptp_rate = 230400000,
+};
+
+static const struct ethqos_emac_match_data emac_sa8255p_data = {
+	.drv_data = &emac_v4_0_0_data,
+	.pm_data = &emac_sa8255p_pm_data,
+};
+
 static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 {
 	struct device *dev = &ethqos->pdev->dev;
@@ -417,6 +455,28 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 	return 0;
 }
 
+static int qcom_ethqos_domain_on(struct qcom_ethqos *ethqos,
+				 enum ethqos_pd_selector sel)
+{
+	struct device *dev = ethqos->pd.pd_list->pd_devs[sel];
+	int ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
+		dev_err(&ethqos->pdev->dev,
+			"Failed to enable the power domain for %s\n",
+			dev_name(dev));
+	return ret;
+}
+
+static void qcom_ethqos_domain_off(struct qcom_ethqos *ethqos,
+				   enum ethqos_pd_selector sel)
+{
+	struct device *dev = ethqos->pd.pd_list->pd_devs[sel];
+
+	pm_runtime_put_sync(dev);
+}
+
 static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 {
 	struct device *dev = &ethqos->pdev->dev;
@@ -652,6 +712,13 @@ static int ethqos_set_serdes_speed_phy(struct qcom_ethqos *ethqos)
 	return phy_set_speed(ethqos->pm.serdes_phy, ethqos->serdes_speed);
 }
 
+static int ethqos_set_serdes_speed_pd(struct qcom_ethqos *ethqos)
+{
+	struct device *dev = ethqos->pd.pd_list->pd_devs[ETHQOS_PD_SERDES];
+
+	return dev_pm_opp_set_level(dev, ethqos->serdes_speed);
+}
+
 static void ethqos_set_serdes_speed(struct qcom_ethqos *ethqos, int speed)
 {
 	if (ethqos->serdes_speed != speed) {
@@ -753,6 +820,27 @@ static void qcom_ethqos_serdes_powerdown(struct net_device *ndev, void *priv)
 	phy_exit(ethqos->pm.serdes_phy);
 }
 
+static int qcom_ethqos_pd_serdes_powerup(struct net_device *ndev, void *priv)
+{
+	struct qcom_ethqos *ethqos = priv;
+	struct device *dev = ethqos->pd.pd_list->pd_devs[ETHQOS_PD_SERDES];
+	int ret;
+
+	ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_SERDES);
+	if (ret < 0)
+		return ret;
+
+	return dev_pm_opp_set_level(dev, ethqos->serdes_speed);
+}
+
+static void qcom_ethqos_pd_serdes_powerdown(struct net_device *ndev, void *priv)
+{
+	struct qcom_ethqos *ethqos = priv;
+
+	/* TODO set level */
+	qcom_ethqos_domain_off(ethqos, ETHQOS_PD_SERDES);
+}
+
 static int ethqos_clks_config(void *priv, bool enabled)
 {
 	struct qcom_ethqos *ethqos = priv;
@@ -785,6 +873,61 @@ static void ethqos_clks_disable(void *data)
 	ethqos_clks_config(ethqos, false);
 }
 
+static int ethqos_pd_clks_config(void *priv, bool enabled)
+{
+	struct qcom_ethqos *ethqos = priv;
+	int ret = 0;
+
+	if (enabled) {
+		ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_MDIO);
+		if (ret < 0) {
+			dev_err(&ethqos->pdev->dev,
+				"Failed to enable the MDIO power domain\n");
+			return ret;
+		}
+
+		ethqos_set_func_clk_en(ethqos);
+	} else {
+		qcom_ethqos_domain_off(ethqos, ETHQOS_PD_MDIO);
+	}
+
+	return ret;
+}
+
+static int qcom_ethqos_pd_init(struct platform_device *pdev, void *priv)
+{
+	struct qcom_ethqos *ethqos = priv;
+	int ret;
+
+	/*
+	 * Enable functional clock to prevent DMA reset after timeout due
+	 * to no PHY clock being enabled after the hardware block has been
+	 * power cycled. The actual configuration will be adjusted once
+	 * ethqos_fix_mac_speed() is called.
+	 */
+	ethqos_set_func_clk_en(ethqos);
+
+	ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_CORE);
+	if (ret)
+		return ret;
+
+	ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_MDIO);
+	if (ret) {
+		qcom_ethqos_domain_off(ethqos, ETHQOS_PD_CORE);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void qcom_ethqos_pd_exit(struct platform_device *pdev, void *data)
+{
+	struct qcom_ethqos *ethqos = data;
+
+	qcom_ethqos_domain_off(ethqos, ETHQOS_PD_MDIO);
+	qcom_ethqos_domain_off(ethqos, ETHQOS_PD_CORE);
+}
+
 static void ethqos_ptp_clk_freq_config(struct stmmac_priv *priv)
 {
 	struct plat_stmmacenet_data *plat_dat = priv->plat;
@@ -825,8 +968,6 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 				     "dt configuration failed\n");
 	}
 
-	plat_dat->clks_config = ethqos_clks_config;
-
 	ethqos = devm_kzalloc(dev, sizeof(*ethqos), GFP_KERNEL);
 	if (!ethqos)
 		return -ENOMEM;
@@ -868,34 +1009,68 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	ethqos->rgmii_config_loopback_en = drv_data->rgmii_config_loopback_en;
 	ethqos->has_emac_ge_3 = drv_data->has_emac_ge_3;
 	ethqos->needs_sgmii_loopback = drv_data->needs_sgmii_loopback;
-
-	ethqos->pm.link_clk = devm_clk_get(dev, clk_name);
-	if (IS_ERR(ethqos->pm.link_clk))
-		return dev_err_probe(dev, PTR_ERR(ethqos->pm.link_clk),
-				     "Failed to get link_clk\n");
-
-	ret = ethqos_clks_config(ethqos, true);
-	if (ret)
-		return ret;
-
-	ret = devm_add_action_or_reset(dev, ethqos_clks_disable, ethqos);
-	if (ret)
-		return ret;
-
-	ethqos->pm.serdes_phy = devm_phy_optional_get(dev, "serdes");
-	if (IS_ERR(ethqos->pm.serdes_phy))
-		return dev_err_probe(dev, PTR_ERR(ethqos->pm.serdes_phy),
-				     "Failed to get serdes phy\n");
-
-	ethqos->set_serdes_speed = ethqos_set_serdes_speed_phy;
 	ethqos->serdes_speed = SPEED_1000;
-	ethqos_update_link_clk(ethqos, SPEED_1000);
+
+	if (pm_data && pm_data->use_domains) {
+		ethqos->set_serdes_speed = ethqos_set_serdes_speed_pd;
+
+		ret = devm_pm_domain_attach_list(dev, &pm_data->pd,
+						 &ethqos->pd.pd_list);
+		if (ret < 0)
+			return dev_err_probe(dev, ret, "Failed to attach power domains\n");
+
+		plat_dat->clks_config = ethqos_pd_clks_config;
+		plat_dat->serdes_powerup = qcom_ethqos_pd_serdes_powerup;
+		plat_dat->serdes_powerdown = qcom_ethqos_pd_serdes_powerdown;
+		plat_dat->exit = qcom_ethqos_pd_exit;
+		plat_dat->init = qcom_ethqos_pd_init;
+		plat_dat->clk_ptp_rate = pm_data->clk_ptp_rate;
+
+		ret = qcom_ethqos_pd_init(pdev, ethqos);
+		if (ret)
+			return ret;
+
+		ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_SERDES);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "Failed to enable the serdes power domain\n");
+	} else {
+		ethqos->set_serdes_speed = ethqos_set_serdes_speed_phy;
+
+		ethqos->pm.link_clk = devm_clk_get(dev, clk_name);
+		if (IS_ERR(ethqos->pm.link_clk))
+			return dev_err_probe(dev, PTR_ERR(ethqos->pm.link_clk),
+					     "Failed to get link_clk\n");
+
+		ret = ethqos_clks_config(ethqos, true);
+		if (ret)
+			return ret;
+
+		ret = devm_add_action_or_reset(dev, ethqos_clks_disable, ethqos);
+		if (ret)
+			return ret;
+
+		ethqos->pm.serdes_phy = devm_phy_optional_get(dev, "serdes");
+		if (IS_ERR(ethqos->pm.serdes_phy))
+			return dev_err_probe(dev, PTR_ERR(ethqos->pm.serdes_phy),
+					     "Failed to get serdes phy\n");
+
+		ethqos_update_link_clk(ethqos, SPEED_1000);
+
+		plat_dat->clks_config = ethqos_clks_config;
+		plat_dat->ptp_clk_freq_config = ethqos_ptp_clk_freq_config;
+
+		if (ethqos->pm.serdes_phy) {
+			plat_dat->serdes_powerup = qcom_ethqos_serdes_powerup;
+			plat_dat->serdes_powerdown  = qcom_ethqos_serdes_powerdown;
+		}
+	}
+
 	ethqos_set_func_clk_en(ethqos);
 
 	plat_dat->bsp_priv = ethqos;
 	plat_dat->fix_mac_speed = ethqos_fix_mac_speed;
 	plat_dat->dump_debug_regs = rgmii_dump;
-	plat_dat->ptp_clk_freq_config = ethqos_ptp_clk_freq_config;
 	plat_dat->has_gmac4 = 1;
 	if (ethqos->has_emac_ge_3)
 		plat_dat->dwmac4_addrs = &drv_data->dwmac4_addrs;
@@ -909,11 +1084,6 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	if (drv_data->dma_addr_width)
 		plat_dat->host_dma_width = drv_data->dma_addr_width;
 
-	if (ethqos->pm.serdes_phy) {
-		plat_dat->serdes_powerup = qcom_ethqos_serdes_powerup;
-		plat_dat->serdes_powerdown  = qcom_ethqos_serdes_powerdown;
-	}
-
 	/* Enable TSO on queue0 and enable TBS on rest of the queues */
 	for (i = 1; i < plat_dat->tx_queues_to_use; i++)
 		plat_dat->tx_queues_cfg[i].tbs_en = 1;
@@ -923,6 +1093,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 
 static const struct of_device_id qcom_ethqos_match[] = {
 	{ .compatible = "qcom,qcs404-ethqos", .data = &emac_qcs404_data},
+	{ .compatible = "qcom,sa8255p-ethqos", .data = &emac_sa8255p_data},
 	{ .compatible = "qcom,sa8775p-ethqos", .data = &emac_sa8775p_data},
 	{ .compatible = "qcom,sc8280xp-ethqos", .data = &emac_sc8280xp_data},
 	{ .compatible = "qcom,sm8150-ethqos", .data = &emac_sm8150_data},

-- 
2.48.1

Re: [PATCH v2 0/8] net: stmmac: qcom-ethqos: add support for SCMI power domains

[Paolo Abeni]

On 10/8/25 10:17 AM, Bartosz Golaszewski wrote:
> Add support for the firmware-managed variant of the DesignWare MAC on
> the sa8255p platform. This series contains new DT bindings and driver
> changes required to support the MAC in the STMMAC driver.
> 
> It also reorganizes the ethqos code quite a bit to make the introduction
> of power domains into the driver a bit easier on the eye.
> 
> The DTS changes will go in separately.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
> Changes in v2:
> - Fix the power-domains property in DT bindings
> - Rework the DT bindings example
> - Drop the DTS patch, it will go upstream separately
> - Link to v1: https://lore.kernel.org/r/20250910-qcom-sa8255p-emac-v1-0-32a79cf1e668@linaro.org

## Form letter - net-next-closed

The merge window for v6.18 has begun and therefore net-next is closed
for new drivers, features, code refactoring and optimizations. We are
currently accepting bug fixes only.

Please repost when net-next reopens after October 12th.

RFC patches sent for review only are obviously welcome at any time.
---
Also please specify the target tree in the subj prefix ('net-next') when
re-posting and possibly additionally CC Russell King for awareness,
since he is doing a lot of work on stmmac.

Thanks,

Paolo