From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Johan Jonker <jbx6244@gmail.com>,
Dragan Simic <dsimic@manjaro.org>,
Diederik de Haas <didi.debian@cknow.org>,
Aurelien Jarno <aurelien@aurel32.net>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-arm-kernel@lists.infradead.org (moderated
list:ARM/Rockchip SoC support),
linux-rockchip@lists.infradead.org (open list:ARM/Rockchip SoC
support), linux-kernel@vger.kernel.org (open list)
Cc: Anand Moon <linux.amoon@gmail.com>
Subject: [PATCH v1] arm64: dts: rockchip: odroid-m1: Add pinctrl for I2S1 8ch TX path
Date: Mon, 13 Oct 2025 20:50:03 +0530 [thread overview]
Message-ID: <20251013152011.131118-1-linux.amoon@gmail.com> (raw)
Enable proper pin multiplexing for the I2S1 8-channel transmit interface by
adding the default pinctrl configuration which esures correct signal routing
and avoids pinmux conflicts during audio playback.
Changes fix the error
[ 116.856643] [ T782] rockchip-pinctrl pinctrl: pin gpio1-10 already requested by affinity_hint; cannot claim for fe410000.i2s
[ 116.857567] [ T782] rockchip-pinctrl pinctrl: error -EINVAL: pin-42 (fe410000.i2s)
[ 116.857618] [ T782] rockchip-pinctrl pinctrl: error -EINVAL: could not request pin 42 (gpio1-10) from group i2s1m0-sdi1 on device rockchip-pinctrl
[ 116.857659] [ T782] rockchip-i2s-tdm fe410000.i2s: Error applying setting, reverse things back
Fixes: 78f858447cb7 ("arm64: dts: rockchip: Add analog audio on ODROID-M1")
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDMI], device 0: fe400000.i2s-i2s-hifi i2s-hifi-0 [fe400000.i2s-i2s-hifi i2s-hifi-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: RK817 [Analog RK817], device 0: fe410000.i2s-rk817-hifi rk817-hifi-0 [fe410000.i2s-rk817-hifi rk817-hifi-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
---
arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
index 0f844806ec54..442a2bc43ba8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
@@ -482,6 +482,8 @@ &i2s0_8ch {
};
&i2s1_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
rockchip,trcm-sync-tx-only;
status = "okay";
};
base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787
--
2.50.1
next reply other threads:[~2025-10-13 15:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-13 15:20 Anand Moon [this message]
2025-10-14 18:06 ` [PATCH v1] arm64: dts: rockchip: odroid-m1: Add pinctrl for I2S1 8ch TX path Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251013152011.131118-1-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=aurelien@aurel32.net \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=didi.debian@cknow.org \
--cc=dsimic@manjaro.org \
--cc=heiko@sntech.de \
--cc=jbx6244@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).