[PATCH v3 0/5] remoteproc: imx_rproc: misc clean up

[Peng Fan <peng.fan@nxp.com>]

This is the 3rd series to cleanup the driver.

Patch 1: simplify clock enable logic
Patch 2: Add a platform detach ops which will be easier to support new
         platforms
Patch 3: Enable runtime for all
Patch 4: Drop method assignment
Patch 5: Add an MAINTAINER entry for i.MX remoteproc drivers with
         Daniel/Shengjiu and me as maintainer

This is the last patchset to do the clean up for imx_rproc.c.
After imx_dsp_rproc.c moved to use platform ops with swith-case removed,
the method entry from dcfg could be removed in the end.

Tested V3 on
i.MX8MP-EVK, i.MX93-11x11-EVK.

Tested V1/V2 on
i.MX8MP-EVK, i.MX8MM-EVK, i.MX93-11x11-EVK, i.MX8QXP-MEK, and i.MX8ULP-EVK.

Thanks to Daniel and Frank for the internal reviewing.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
Changes in v3:
- Rebased to latest next branch
- Resolve the conflicts in patch 3 to enable runtime PM for i.MX family.
- Add A-b for patch 5
- Link to v2: https://lore.kernel.org/linux-remoteproc/20250920-imx_rproc_c2-v2-0-3351c4c96df5@nxp.com/#t

Changes in v2:
- Add R-b from Daniel and Frank
- Update comment in patch 1 (from Daniel)
- Update commit log in patch 4 (from Daniel)
- Include Shengjiu as maintainer
- Link to v1: https://lore.kernel.org/r/20250918-imx_rproc_c2-v1-0-deec8183185f@nxp.com

---
Peng Fan (5):
      remoteproc: imx_rproc: Simplify clock enable logic using dcfg flags
      remoteproc: imx_rproc: Make detach operation platform-specific
      remoteproc: imx_rproc: Enable PM runtime support unconditionally
      remoteproc: imx_rproc: Remove the assignement to method
      MAINTAINERS: Add an entry for i.MX remoteproc driver

 MAINTAINERS                    |  9 +++++
 drivers/remoteproc/imx_rproc.c | 90 +++++++++++++++++-------------------------
 drivers/remoteproc/imx_rproc.h |  2 +
 3 files changed, 47 insertions(+), 54 deletions(-)
---
base-commit: f4044e1a6edcec2e63adc37a241f08af7fdd2834
change-id: 20251015-imx-rproc-c3_1-fec6f0297a9e

Best regards,
-- 
Peng Fan <peng.fan@nxp.com>