[PATCH] firmware: arm_scmi: Add new sensor unit types

[PATCH] firmware: arm_scmi: Add new sensor unit types

[Artem Shimko]

Add support for two new sensor unit types introduced in Arm SCMI
- STATE_BINARY (0x5E): Binary state (1: enabled/on, 0: disabled/off)
- BYTES_SEC (0x5F): Bytes per second

These unit types are used for sensors that report binary state information
and data transfer rate measurements respectively.

Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
---
Hello,

This patch adds definitions for two new sensor unit types that were
introduced in the Arm System Control and Management Interface (SCMI)
Specification version 4.0:

STATE_BINARY (0x5E) - Used for sensors that represent binary states
where:
1 indicates enabled/on state
0 indicates disabled/off state

BYTES_SEC (0x5F) - Used for sensors that measure data transfer rates
in bytes per second

These additions ensure compatibility with SCMIv4.0 and allow proper
handling of binary state sensors and bandwidth measurement sensors
in the Linux SCMI driver.

The patch follows the existing pattern for sensor unit type definitions
and maintains backward compatibility with previous SCMI versions.

Thank you for your consideration.

Best regards,
Artem Shimko

 include/linux/scmi_protocol.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index aafaac1496b0..629acb7831eb 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -488,6 +488,8 @@ enum scmi_sensor_class {
 	CUBIC_METERS_SEC = 0x5B,
 	MM_MERCURY = 0x5C,
 	RADIANS_SEC_SQUARED = 0x5D,
+	STATE_BINARY = 0x5E,
+	BYTES_SEC = 0x5F,
 	OEM_UNIT = 0xFF
 };
 
-- 
2.43.0

Re: [PATCH] firmware: arm_scmi: Add new sensor unit types

[Sudeep Holla]

On Tue, Oct 21, 2025 at 07:52:11PM +0300, Artem Shimko wrote:
> Add support for two new sensor unit types introduced in Arm SCMI
> - STATE_BINARY (0x5E): Binary state (1: enabled/on, 0: disabled/off)
> - BYTES_SEC (0x5F): Bytes per second
> 
> These unit types are used for sensors that report binary state information
> and data transfer rate measurements respectively.
> 
> Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
> ---
> Hello,
> 
> This patch adds definitions for two new sensor unit types that were
> introduced in the Arm System Control and Management Interface (SCMI)
> Specification version 4.0:
>

It is still alpha, we don't add anything into the kernel unless it is
of beta quality. Do you have a use or you are just adding to match the
spec ?

-- 
Regards,
Sudeep

Re: [PATCH] firmware: arm_scmi: Add new sensor unit types

[Artem Shimko]

On Wed, Oct 22, 2025 at 12:22 PM Sudeep Holla <sudeep.holla@arm.com> wrote:

> It is still alpha, we don't add anything into the kernel unless it is
> of beta quality. Do you have a use or you are just adding to match the
> spec ?
Hi Sudeep,

I'm adding it to meet the specifications.

Trying to be useful

Thank you.

Best regards,
Artem