linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Christian Marangi <ansuelsmth@gmail.com>
To: Lorenzo Bianconi <lorenzo@kernel.org>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Russell King <linux@armlinux.org.uk>,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Christian Marangi <ansuelsmth@gmail.com>
Subject: [net-next PATCH 2/2] net: airoha: add phylink support for GDM1
Date: Tue, 21 Oct 2025 21:33:12 +0200	[thread overview]
Message-ID: <20251021193315.2192359-3-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20251021193315.2192359-1-ansuelsmth@gmail.com>

In preparation for support of GDM2+ port, fill in phylink OPs for GDM1
that is an INTERNAL port for the Embedded Switch.

Rework the GDM init logic by first preparing the struct with all the
required info and creating the phylink interface and only after the
parsing register the related netdev.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/net/ethernet/airoha/airoha_eth.c | 108 ++++++++++++++++++++---
 drivers/net/ethernet/airoha/airoha_eth.h |   3 +
 2 files changed, 99 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c
index ce6d13b10e27..fc237775a998 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.c
+++ b/drivers/net/ethernet/airoha/airoha_eth.c
@@ -1613,6 +1613,8 @@ static int airoha_dev_open(struct net_device *dev)
 	struct airoha_gdm_port *port = netdev_priv(dev);
 	struct airoha_qdma *qdma = port->qdma;
 
+	phylink_start(port->phylink);
+
 	netif_tx_start_all_queues(dev);
 	err = airoha_set_vip_for_gdm_port(port, true);
 	if (err)
@@ -1665,6 +1667,8 @@ static int airoha_dev_stop(struct net_device *dev)
 		}
 	}
 
+	phylink_stop(port->phylink);
+
 	return 0;
 }
 
@@ -2813,6 +2817,17 @@ static const struct ethtool_ops airoha_ethtool_ops = {
 	.get_link		= ethtool_op_get_link,
 };
 
+static struct phylink_pcs *airoha_phylink_mac_select_pcs(struct phylink_config *config,
+							 phy_interface_t interface)
+{
+	return NULL;
+}
+
+static void airoha_mac_config(struct phylink_config *config, unsigned int mode,
+			      const struct phylink_link_state *state)
+{
+}
+
 static int airoha_metadata_dst_alloc(struct airoha_gdm_port *port)
 {
 	int i;
@@ -2857,6 +2872,55 @@ bool airoha_is_valid_gdm_port(struct airoha_eth *eth,
 	return false;
 }
 
+static void airoha_mac_link_up(struct phylink_config *config, struct phy_device *phy,
+			       unsigned int mode, phy_interface_t interface,
+			       int speed, int duplex, bool tx_pause, bool rx_pause)
+{
+}
+
+static void airoha_mac_link_down(struct phylink_config *config, unsigned int mode,
+				 phy_interface_t interface)
+{
+}
+
+static const struct phylink_mac_ops airoha_phylink_ops = {
+	.mac_select_pcs = airoha_phylink_mac_select_pcs,
+	.mac_config = airoha_mac_config,
+	.mac_link_up = airoha_mac_link_up,
+	.mac_link_down = airoha_mac_link_down,
+};
+
+static int airoha_setup_phylink(struct net_device *netdev)
+{
+	struct airoha_gdm_port *port = netdev_priv(netdev);
+	struct device *dev = &netdev->dev;
+	phy_interface_t phy_mode;
+	struct phylink *phylink;
+
+	phy_mode = device_get_phy_mode(dev);
+	if (phy_mode < 0) {
+		dev_err(dev, "incorrect phy-mode\n");
+		return phy_mode;
+	}
+
+	port->phylink_config.dev = dev;
+	port->phylink_config.type = PHYLINK_NETDEV;
+	port->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+						MAC_10000FD;
+
+	__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+		  port->phylink_config.supported_interfaces);
+
+	phylink = phylink_create(&port->phylink_config, dev_fwnode(dev),
+				 phy_mode, &airoha_phylink_ops);
+	if (IS_ERR(phylink))
+		return PTR_ERR(phylink);
+
+	port->phylink = phylink;
+
+	return 0;
+}
+
 static int airoha_alloc_gdm_port(struct airoha_eth *eth,
 				 struct device_node *np, int index)
 {
@@ -2931,19 +2995,30 @@ static int airoha_alloc_gdm_port(struct airoha_eth *eth,
 	port->id = id;
 	eth->ports[p] = port;
 
-	err = airoha_metadata_dst_alloc(port);
-	if (err)
-		return err;
+	return airoha_metadata_dst_alloc(port);
+}
 
-	err = register_netdev(dev);
-	if (err)
-		goto free_metadata_dst;
+static int airoha_register_gdm_ports(struct airoha_eth *eth)
+{
+	int i;
 
-	return 0;
+	for (i = 0; i < ARRAY_SIZE(eth->ports); i++) {
+		struct airoha_gdm_port *port = eth->ports[i];
+		int err;
 
-free_metadata_dst:
-	airoha_metadata_dst_free(port);
-	return err;
+		if (!port)
+			continue;
+
+		err = airoha_setup_phylink(port->dev);
+		if (err)
+			return err;
+
+		err = register_netdev(port->dev);
+		if (err)
+			return err;
+	}
+
+	return 0;
 }
 
 static int airoha_probe(struct platform_device *pdev)
@@ -3034,6 +3109,10 @@ static int airoha_probe(struct platform_device *pdev)
 		}
 	}
 
+	err = airoha_register_gdm_ports(eth);
+	if (err)
+		goto error_napi_stop;
+
 	return 0;
 
 error_napi_stop:
@@ -3047,10 +3126,14 @@ static int airoha_probe(struct platform_device *pdev)
 	for (i = 0; i < ARRAY_SIZE(eth->ports); i++) {
 		struct airoha_gdm_port *port = eth->ports[i];
 
-		if (port && port->dev->reg_state == NETREG_REGISTERED) {
+		if (!port)
+			continue;
+
+		if (port->dev->reg_state == NETREG_REGISTERED) {
 			unregister_netdev(port->dev);
-			airoha_metadata_dst_free(port);
+			phylink_destroy(port->phylink);
 		}
+		airoha_metadata_dst_free(port);
 	}
 	free_netdev(eth->napi_dev);
 	platform_set_drvdata(pdev, NULL);
@@ -3076,6 +3159,7 @@ static void airoha_remove(struct platform_device *pdev)
 
 		airoha_dev_stop(port->dev);
 		unregister_netdev(port->dev);
+		phylink_destroy(port->phylink);
 		airoha_metadata_dst_free(port);
 	}
 	free_netdev(eth->napi_dev);
diff --git a/drivers/net/ethernet/airoha/airoha_eth.h b/drivers/net/ethernet/airoha/airoha_eth.h
index eb27a4ff5198..c144c1ece23b 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.h
+++ b/drivers/net/ethernet/airoha/airoha_eth.h
@@ -531,6 +531,9 @@ struct airoha_gdm_port {
 	struct net_device *dev;
 	int id;
 
+	struct phylink *phylink;
+	struct phylink_config phylink_config;
+
 	struct airoha_hw_stats stats;
 
 	DECLARE_BITMAP(qos_sq_bmap, AIROHA_NUM_QOS_CHANNELS);
-- 
2.51.0



  parent reply	other threads:[~2025-10-21 19:33 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-21 19:33 [net-next PATCH 0/2] net: airoha: initial phylink support Christian Marangi
2025-10-21 19:33 ` [net-next PATCH 1/2] net: airoha: use device_set_node helper to setup GDM node Christian Marangi
2025-10-21 19:33 ` Christian Marangi [this message]
2025-10-22  7:28   ` [net-next PATCH 2/2] net: airoha: add phylink support for GDM1 Lorenzo Bianconi
2025-10-22  7:42   ` Maxime Chevallier
2025-10-22 15:52     ` Christian Marangi
2025-10-22 15:45   ` Simon Horman
2025-10-22 15:48     ` Christian Marangi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251021193315.2192359-3-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=lorenzo@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).