From: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
To: Rui Miguel Silva <rmfrfs@gmail.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Martin Kepplinger <martink@posteo.de>,
Purism Kernel Team <kernel@puri.sm>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Frank Li <Frank.Li@nxp.com>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Guoniu Zhou <guoniu.zhou@nxp.com>,
Conor Dooley <conor.dooley@microchip.com>
Subject: [PATCH v7 0/5] Add MIPI CSI-2 support for i.MX8ULP
Date: Thu, 23 Oct 2025 17:19:41 +0800 [thread overview]
Message-ID: <20251023-csi2_imx8ulp-v7-0-5ecb081ce79b@nxp.com> (raw)
The serial adds MIPI CSI-2 support for i.MX8ULP.
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
---
Changes in v7:
- No functional changes, only move patch 2 after patch 4 to avoid dependency issues.
- Rebased on latest media/next
- Link to v6: https://lore.kernel.org/r/20250917-csi2_imx8ulp-v6-0-23a355982eff@nxp.com
Changes in v6:
- s/existed/existing/ in patch 1 commit log.
- Delete the compatible between 8ulp and 8qxp since 8ulp need one more clock.
- Update compatible string in dts for csi node.
- Add one new patch to handle 8ulp in driver.
media: imx8mq-mipi-csi2: Add support for i.MX8ULP
- Link to v5: https://lore.kernel.org/r/20250901-csi2_imx8ulp-v5-0-67964d1471f3@nxp.com
Changes in v5:
- Delete else: block and move clock constrains to each case.
- List exact cases, but put imx8qxp/qm in one if:then: block to avoid
repetitive code since they are same.
- Link to v4: https://lore.kernel.org/all/20250828-csi2_imx8ulp-v4-0-a2f97b15bb98@nxp.com
Changes in v4:
- Change csr clock name to pclk which is more readability.
- Add restriction to i.MX8ULP and the other variants remain the same as previous versions.
- Update commit log in patch 1 to describe why add new compatible string for i.MX8ULP.
- Link to v3: https://lore.kernel.org/all/20250825-csi2_imx8ulp-v3-0-35885aba62bc@nxp.com
Changes in v3:
- Correct the order of "fsl,imx8qm-mipi-csi2","fsl,imx8qm-mipi-csi2".
- Correct the order of minItems and maxItems.
- Restict all variants.
- Change pclk clock name to csr to match IP port name.
- Align description about csr clock with IP datasheet.
- Add reasons for adding a fourth clock(csr) in patch 1 commit log.
- Link to v2: https://lore.kernel.org/all/20250822-csi2_imx8ulp-v2-0-26a444394965@nxp.com
Changes in v2:
- Add more description about pclk clock.
- Change minItems/maxItems to 2 for resets property.
- Better to handle "fsl,imx8ulp-mipi-csi2" variant.
- Move comment to the top of reset_control_deassert().
- Move dts patch as the last one.
- Add "fsl,imx8qxp-mipi-csi2" to compatible string list of csi node.
- Remove patch 5 in v1.
- Link to v1: https://lore.kernel.org/all/20250812081923.1019345-1-guoniu.zhou@oss.nxp.com
---
Guoniu Zhou (5):
media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8ULP compatible string
media: imx8mq-mipi-csi2: Use devm_clk_bulk_get_all() to fetch clocks
media: imx8mq-mipi-csi2: Explicitly release reset
media: imx8mq-mipi-csi2: Add support for i.MX8ULP
arm64: dts: imx8ulp: Add CSI and ISI Nodes
.../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 41 ++++++++++++-
arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 67 ++++++++++++++++++++++
drivers/media/platform/nxp/imx8mq-mipi-csi2.c | 61 ++++++--------------
3 files changed, 124 insertions(+), 45 deletions(-)
---
base-commit: 1fdb55ed40fa5ebe6934bd6b93036c714ebb5ef8
change-id: 20250819-csi2_imx8ulp-9db386dd6bdf
Best regards,
--
Guoniu Zhou <guoniu.zhou@nxp.com>
next reply other threads:[~2025-10-23 9:19 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-23 9:19 Guoniu Zhou [this message]
2025-10-23 9:19 ` [PATCH v7 1/5] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8ULP compatible string Guoniu Zhou
2025-10-27 0:05 ` Laurent Pinchart
2025-11-04 7:13 ` G.N. Zhou (OSS)
2025-11-11 20:47 ` Frank Li
2025-11-11 21:10 ` Laurent Pinchart
2025-11-11 22:06 ` Frank Li
2025-11-13 2:00 ` Laurent Pinchart
2025-10-23 9:19 ` [PATCH v7 2/5] media: imx8mq-mipi-csi2: Use devm_clk_bulk_get_all() to fetch clocks Guoniu Zhou
2025-10-27 0:11 ` Laurent Pinchart
2025-11-04 7:47 ` G.N. Zhou (OSS)
2025-11-11 17:28 ` Laurent Pinchart
2025-11-21 2:21 ` G.N. Zhou (OSS)
2025-11-21 2:47 ` Laurent Pinchart
2025-10-23 9:19 ` [PATCH v7 3/5] media: imx8mq-mipi-csi2: Explicitly release reset Guoniu Zhou
2025-10-27 0:42 ` Laurent Pinchart
2025-10-23 9:19 ` [PATCH v7 4/5] media: imx8mq-mipi-csi2: Add support for i.MX8ULP Guoniu Zhou
2025-10-27 0:44 ` Laurent Pinchart
2025-10-23 9:19 ` [PATCH v7 5/5] arm64: dts: imx8ulp: Add CSI and ISI Nodes Guoniu Zhou
2025-10-27 1:02 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251023-csi2_imx8ulp-v7-0-5ecb081ce79b@nxp.com \
--to=guoniu.zhou@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=guoniu.zhou@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=kernel@puri.sm \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martink@posteo.de \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=rmfrfs@gmail.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).