[PATCH v2 1/5] clk: amlogic: Fix out-of-range PLL frequency setting

[Chuan Liu via B4 Relay <devnull+chuan.liu.amlogic.com@kernel.org>]

From: Chuan Liu <chuan.liu@amlogic.com>

If the calculated 'm' falls into the range:

    pll->range->max < m < (1 << pll->m.width)

Here an incorrect 'm' value could be obtained, so an additional
condition is added to ensure that the calculated 'm' stays within a
valid range.

Fixes: 8eed1db1adec6 ("clk: meson: pll: update driver for the g12a")
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
---
 drivers/clk/meson/clk-pll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index 1ea6579a760f..629f6af18ea1 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -191,7 +191,7 @@ static int meson_clk_get_pll_range_index(unsigned long rate,
 	*m = meson_clk_get_pll_range_m(rate, parent_rate, *n, pll);
 
 	/* the pre-divider gives a multiplier too big - stop */
-	if (*m >= (1 << pll->m.width))
+	if (*m > pll->range->max || *m >= (1 << pll->m.width))
 		return -EINVAL;
 
 	return 0;

-- 
2.42.0