Re: [PATCH v3 13/13] arm64: dts: imx8mp: Specify the number of channels for CSI-2 receivers

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Shawn,

The DT bindings have been merged in v6.18, could you please pick this
patch for v6.19 ?

On Fri, Aug 22, 2025 at 03:27:33AM +0300, Laurent Pinchart wrote:
> The CSI-2 receivers in the i.MX8MP have 3 output channels. Specify this
> in the device tree, to enable support for more than one channel.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index bb24dba7338e..1e52840078df 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1764,6 +1764,7 @@ mipi_csi_0: csi@32e40000 {
>  				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>,
>  							 <&clk IMX8MP_CLK_24M>;
>  				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
> +				fsl,num-channels = <3>;
>  				status = "disabled";
>  
>  				ports {
> @@ -1799,6 +1800,7 @@ mipi_csi_1: csi@32e50000 {
>  				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>,
>  							 <&clk IMX8MP_CLK_24M>;
>  				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
> +				fsl,num-channels = <3>;
>  				status = "disabled";
>  
>  				ports {

-- 
Regards,

Laurent Pinchart