linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	kvm@vger.kernel.org
Cc: Joey Gouly <joey.gouly@arm.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Oliver Upton <oliver.upton@linux.dev>,
	Zenghui Yu <yuzenghui@huawei.com>,
	Christoffer Dall <christoffer.dall@arm.com>,
	Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
Subject: [PATCH 31/33] KVM: arm64: GICv2: Handle deactivation via GICV_DIR traps
Date: Mon,  3 Nov 2025 16:55:15 +0000	[thread overview]
Message-ID: <20251103165517.2960148-32-maz@kernel.org> (raw)
In-Reply-To: <20251103165517.2960148-1-maz@kernel.org>

Add the plumbing of GICv2 interrupt deactivation via GICV_DIR.
This requires adding a new device so that we can easily decode
the DIR address.

The deactivation itself is very similar to the GICv3 version.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 arch/arm64/kvm/vgic/vgic-mmio-v2.c |  24 +++++++
 arch/arm64/kvm/vgic/vgic-mmio.h    |   1 +
 arch/arm64/kvm/vgic/vgic-v2.c      | 110 +++++++++++++++++++++++++++++
 arch/arm64/kvm/vgic/vgic.h         |   1 +
 include/kvm/arm_vgic.h             |   1 +
 5 files changed, 137 insertions(+)

diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v2.c b/arch/arm64/kvm/vgic/vgic-mmio-v2.c
index f25fccb1f8e63..406845b3117cf 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio-v2.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio-v2.c
@@ -359,6 +359,16 @@ static void vgic_mmio_write_vcpuif(struct kvm_vcpu *vcpu,
 	vgic_set_vmcr(vcpu, &vmcr);
 }
 
+static void vgic_mmio_write_dir(struct kvm_vcpu *vcpu,
+				gpa_t addr, unsigned int len,
+				unsigned long val)
+{
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_deactivate(vcpu, val);
+	else
+		vgic_v3_deactivate(vcpu, val);
+}
+
 static unsigned long vgic_mmio_read_apr(struct kvm_vcpu *vcpu,
 					gpa_t addr, unsigned int len)
 {
@@ -482,6 +492,10 @@ static const struct vgic_register_region vgic_v2_cpu_registers[] = {
 	REGISTER_DESC_WITH_LENGTH(GIC_CPU_IDENT,
 		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
 		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH_UACCESS(GIC_CPU_DEACTIVATE,
+		vgic_mmio_read_raz, vgic_mmio_write_dir,
+		vgic_mmio_read_raz, vgic_mmio_uaccess_write_wi,
+		4, VGIC_ACCESS_32bit),
 };
 
 unsigned int vgic_v2_init_dist_iodev(struct vgic_io_device *dev)
@@ -494,6 +508,16 @@ unsigned int vgic_v2_init_dist_iodev(struct vgic_io_device *dev)
 	return SZ_4K;
 }
 
+unsigned int vgic_v2_init_cpuif_iodev(struct vgic_io_device *dev)
+{
+	dev->regions = vgic_v2_cpu_registers;
+	dev->nr_regions = ARRAY_SIZE(vgic_v2_cpu_registers);
+
+	kvm_iodevice_init(&dev->dev, &kvm_io_gic_ops);
+
+	return KVM_VGIC_V2_CPU_SIZE;
+}
+
 int vgic_v2_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr)
 {
 	const struct vgic_register_region *region;
diff --git a/arch/arm64/kvm/vgic/vgic-mmio.h b/arch/arm64/kvm/vgic/vgic-mmio.h
index 5b490a4dfa5e9..50dc80220b0f3 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio.h
+++ b/arch/arm64/kvm/vgic/vgic-mmio.h
@@ -213,6 +213,7 @@ void vgic_write_irq_line_level_info(struct kvm_vcpu *vcpu, u32 intid,
 				    const u32 val);
 
 unsigned int vgic_v2_init_dist_iodev(struct vgic_io_device *dev);
+unsigned int vgic_v2_init_cpuif_iodev(struct vgic_io_device *dev);
 
 unsigned int vgic_v3_init_dist_iodev(struct vgic_io_device *dev);
 
diff --git a/arch/arm64/kvm/vgic/vgic-v2.c b/arch/arm64/kvm/vgic/vgic-v2.c
index 0159da5a94412..5ab29c6755ade 100644
--- a/arch/arm64/kvm/vgic/vgic-v2.c
+++ b/arch/arm64/kvm/vgic/vgic-v2.c
@@ -9,6 +9,7 @@
 #include <kvm/arm_vgic.h>
 #include <asm/kvm_mmu.h>
 
+#include "vgic-mmio.h"
 #include "vgic.h"
 
 static inline void vgic_v2_write_lr(int lr, u32 val)
@@ -147,6 +148,104 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
 	cpuif->used_lrs = 0;
 }
 
+void vgic_v2_deactivate(struct kvm_vcpu *vcpu, u32 val)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_v2_cpu_if *cpuif = &vgic_cpu->vgic_v2;
+	struct kvm_vcpu *target_vcpu = NULL;
+	bool mmio = false;
+	struct vgic_irq *irq;
+	unsigned long flags;
+	u64 lr = 0;
+	u8 cpuid;
+
+	/* Snapshot CPUID, and remove it from the INTID */
+	cpuid = FIELD_GET(GENMASK_ULL(12, 10), val);
+	val &= ~GENMASK_ULL(12, 10);
+
+	/* We only deal with DIR when EOIMode==1 */
+	if (!(cpuif->vgic_vmcr & GICH_VMCR_EOI_MODE_MASK))
+		return;
+
+	/* Make sure we're in the same context as LR handling */
+	local_irq_save(flags);
+
+	irq = vgic_get_vcpu_irq(vcpu, val);
+	if (WARN_ON_ONCE(!irq))
+		goto out;
+
+	/*
+	 * Four possibities:
+	 *
+	 * - The irq is not queued on any CPU, and there is nothing to
+	 *   do,
+	 *
+	 * - Or the irq is in an LR, meaning that its state is not
+	 *   directly observable. Treat it bluntly by making it as if
+	 *   this was a write to GICD_ICACTIVER, which will force an
+	 *   exit on all vcpus. If it hurts, don't do that.
+	 *
+	 * - Or the irq is active, but not in an LR, and we can
+	 *   directly deactivate it by building a pseudo-LR, fold it,
+	 *   and queue a request to prune the resulting ap_list,
+	 *
+	 * - Or the irq is not active, and there is nothing to do.
+	 *
+	 * Special care must be taken to match the source CPUID when
+	 * deactivating a GICv2 SGI.
+	 */
+	scoped_guard(raw_spinlock, &irq->irq_lock) {
+		target_vcpu = vgic_target_oracle(irq);
+
+		/* Not on any ap_list? */
+		if (!target_vcpu)
+			goto put;
+
+		/*
+		 * Urgh. We're deactivating something that we cannot
+		 * observe yet... Big hammer time.
+		 */
+		if (irq->on_lr) {
+			mmio = true;
+			goto put;
+		}
+
+		/* Not active: relax!  */
+		if (!irq->active) {
+			target_vcpu = NULL;
+			goto put;
+		}
+
+		/* SGI: check that the cpuid matches */
+		if (val < VGIC_NR_SGIS && irq->active_source != cpuid) {
+			target_vcpu = NULL;
+			goto put;
+		}
+
+		/* (with a Dalek voice) DEACTIVATE!!!! */
+		lr = vgic_v2_compute_lr(vcpu, irq) & ~GICH_LR_ACTIVE_BIT;
+	}
+
+	if (lr & GICH_LR_HW)
+		writel_relaxed(FIELD_GET(GICH_LR_PHYSID_CPUID, lr),
+			       kvm_vgic_global_state.gicc_base + GIC_CPU_DEACTIVATE);
+
+	vgic_v2_fold_lr(vcpu, lr);
+
+put:
+	vgic_put_irq(vcpu->kvm, irq);
+
+out:
+	local_irq_restore(flags);
+
+	if (mmio)
+		vgic_mmio_write_cactive(vcpu, val / 32, 4, BIT(val % 32));
+
+	/* Force the ap_list to be pruned */
+	if (target_vcpu)
+		kvm_make_request(KVM_REQ_VGIC_PROCESS_UPDATE, target_vcpu);
+}
+
 static u32 vgic_v2_compute_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
 {
 	u32 val = irq->intid;
@@ -349,6 +448,7 @@ static bool vgic_v2_check_base(gpa_t dist_base, gpa_t cpu_base)
 int vgic_v2_map_resources(struct kvm *kvm)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
+	unsigned int len;
 	int ret = 0;
 
 	if (IS_VGIC_ADDR_UNDEF(dist->vgic_dist_base) ||
@@ -372,6 +472,16 @@ int vgic_v2_map_resources(struct kvm *kvm)
 		return ret;
 	}
 
+	len = vgic_v2_init_cpuif_iodev(&dist->cpuif_iodev);
+	dist->cpuif_iodev.base_addr = dist->vgic_cpu_base;
+	dist->cpuif_iodev.iodev_type = IODEV_CPUIF;
+	dist->cpuif_iodev.redist_vcpu = NULL;
+
+	ret = kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, dist->vgic_cpu_base,
+				      len, &dist->cpuif_iodev.dev);
+	if (ret)
+		return ret;
+
 	if (!static_branch_unlikely(&vgic_v2_cpuif_trap)) {
 		ret = kvm_phys_addr_ioremap(kvm, dist->vgic_cpu_base,
 					    kvm_vgic_global_state.vcpu_base,
diff --git a/arch/arm64/kvm/vgic/vgic.h b/arch/arm64/kvm/vgic/vgic.h
index 39589e1fbbb55..cf41864736204 100644
--- a/arch/arm64/kvm/vgic/vgic.h
+++ b/arch/arm64/kvm/vgic/vgic.h
@@ -261,6 +261,7 @@ int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr,
 
 void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu);
 void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr);
+void vgic_v2_deactivate(struct kvm_vcpu *vcpu, u32 val);
 void vgic_v2_clear_lr(struct kvm_vcpu *vcpu, int lr);
 void vgic_v2_configure_hcr(struct kvm_vcpu *vcpu, struct ap_list_summary *als);
 int vgic_v2_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr);
diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 3c528c74bc6bf..caa72a92cb5d9 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -284,6 +284,7 @@ struct vgic_dist {
 	struct vgic_irq		*spis;
 
 	struct vgic_io_device	dist_iodev;
+	struct vgic_io_device	cpuif_iodev;
 
 	bool			has_its;
 	bool			table_write_in_progress;
-- 
2.47.3



  parent reply	other threads:[~2025-11-03 16:56 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-03 16:54 [PATCH 00/33] KVM: arm64: Add LR overflow infrastructure Marc Zyngier
2025-11-03 16:54 ` [PATCH 01/33] irqchip/gic: Add missing GICH_HCR control bits Marc Zyngier
2025-11-03 16:54 ` [PATCH 02/33] irqchip/gic: Expose CPU interface VA to KVM Marc Zyngier
2025-11-03 16:54 ` [PATCH 03/33] irqchip/apple-aic: Spit out ICH_MIDR_EL2 value on spurious vGIC MI Marc Zyngier
2025-11-04 11:13   ` Zenghui Yu
2025-11-03 16:54 ` [PATCH 04/33] KVM: arm64: Turn vgic-v3 errata traps into a patched-in constant Marc Zyngier
2025-11-03 16:54 ` [PATCH 05/33] KVM: arm64: GICv3: Detect and work around the lack of ICV_DIR_EL1 trapping Marc Zyngier
2025-11-04  8:50   ` Yao Yuan
2025-11-04  9:04     ` Marc Zyngier
2025-11-04  9:40       ` Yao Yuan
2025-11-05  2:01   ` kernel test robot
2025-11-05 11:31     ` Marc Zyngier
2025-11-03 16:54 ` [PATCH 06/33] KVM: arm64: Repack struct vgic_irq fields Marc Zyngier
2025-11-03 16:54 ` [PATCH 07/33] KVM: arm64: Add tracking of vgic_irq being present in a LR Marc Zyngier
2025-11-03 16:54 ` [PATCH 08/33] KVM: arm64: Add LR overflow handling documentation Marc Zyngier
2025-11-03 16:54 ` [PATCH 09/33] KVM: arm64: GICv3: Drop LPI active state when folding LRs Marc Zyngier
2025-11-03 16:54 ` [PATCH 10/33] KVM: arm64: GICv3: Preserve EOIcount on exit Marc Zyngier
2025-11-03 16:54 ` [PATCH 11/33] KVM: arm64: GICv3: Decouple ICH_HCR_EL2 programming from LRs Marc Zyngier
2025-11-03 16:54 ` [PATCH 12/33] KVM: arm64: GICv3: Extract LR folding primitive Marc Zyngier
2025-11-03 16:54 ` [PATCH 13/33] KVM: arm64: GICv3: Extract LR computing primitive Marc Zyngier
2025-11-03 16:54 ` [PATCH 14/33] KVM: arm64: GICv2: Preserve EOIcount on exit Marc Zyngier
2025-11-03 16:54 ` [PATCH 15/33] KVM: arm64: GICv2: Decouple GICH_HCR programming from LRs being loaded Marc Zyngier
2025-11-03 16:55 ` [PATCH 16/33] KVM: arm64: GICv2: Extract LR folding primitive Marc Zyngier
2025-11-03 16:55 ` [PATCH 17/33] KVM: arm64: GICv2: Extract LR computing primitive Marc Zyngier
2025-11-03 16:55 ` [PATCH 18/33] KVM: arm64: Compute vgic state irrespective of the number of interrupts Marc Zyngier
2025-11-03 16:55 ` [PATCH 19/33] KVM: arm64: Eagerly save VMCR on exit Marc Zyngier
2025-11-03 16:55 ` [PATCH 20/33] KVM: arm64: Revamp vgic maintenance interrupt configuration Marc Zyngier
2025-11-03 16:55 ` [PATCH 21/33] KVM: arm64: Make vgic_target_oracle() globally available Marc Zyngier
2025-11-03 16:55 ` [PATCH 22/33] KVM: arm64: Invert ap_list sorting to push active interrupts out Marc Zyngier
2025-11-03 16:55 ` [PATCH 23/33] KVM: arm64: Move undeliverable interrupts to the end of ap_list Marc Zyngier
2025-11-03 16:55 ` [PATCH 24/33] KVM: arm64: Use MI to detect groups being enabled/disabled Marc Zyngier
2025-11-03 16:55 ` [PATCH 25/33] KVM: arm64: Add AP-list overflow split/splice Marc Zyngier
2025-11-03 16:55 ` [PATCH 26/33] KVM: arm64: GICv3: Handle LR overflow when EOImode==0 Marc Zyngier
2025-11-03 16:55 ` [PATCH 27/33] KVM: arm64: GICv3: Handle deactivation via ICV_DIR_EL1 traps Marc Zyngier
2025-11-03 16:55 ` [PATCH 28/33] KVM: arm64: GICv3: Add GICv2 SGI handling to deactivation primitive Marc Zyngier
2025-11-03 16:55 ` [PATCH 29/33] KVM: arm64: GICv3: Set ICH_HCR_EL2.TDIR when interrupts overflow LR capacity Marc Zyngier
2025-11-03 16:55 ` [PATCH 30/33] KVM: arm64: GICv2: Handle LR overflow when EOImode==0 Marc Zyngier
2025-11-03 16:55 ` Marc Zyngier [this message]
2025-11-03 16:55 ` [PATCH 32/33] KVM: arm64: GICv2: Always trap GICV_DIR register Marc Zyngier
2025-11-03 16:55 ` [PATCH 33/33] KVM: arm64: GICv3: Add SPI tracking to handle asymmetric deactivation Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251103165517.2960148-32-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=Volodymyr_Babchuk@epam.com \
    --cc=christoffer.dall@arm.com \
    --cc=joey.gouly@arm.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=oliver.upton@linux.dev \
    --cc=suzuki.poulose@arm.com \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).