[PATCH] arm64: dts: imx8mp: Add missing LED enumerators for DH electronics i.MX8M Plus DHCOM on PDK2

[Marek Vasut <marek.vasut@mailbox.org>]

The LED enumerators are missing, which prevents the LEDs from being
accurately told apart by label. Fill in the enumerators the same way
they are already present on PDK3.

Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
---
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: imx@lists.linux.dev
Cc: kernel@dh-electronics.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
index ebdf13e97b4e2..3d18c964a22cd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
@@ -88,6 +88,7 @@ led-0 {
 			color = <LED_COLOR_ID_GREEN>;
 			default-state = "off";
 			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* GPIO E */
 			pinctrl-0 = <&pinctrl_dhcom_e>;
 			pinctrl-names = "default";
@@ -97,6 +98,7 @@ led-1 {
 			color = <LED_COLOR_ID_GREEN>;
 			default-state = "off";
 			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
 			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
 			pinctrl-0 = <&pinctrl_dhcom_f>;
 			pinctrl-names = "default";
@@ -106,6 +108,7 @@ led-2 {
 			color = <LED_COLOR_ID_GREEN>;
 			default-state = "off";
 			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; /* GPIO H */
 			pinctrl-0 = <&pinctrl_dhcom_h>;
 			pinctrl-names = "default";
@@ -115,6 +118,7 @@ led-3 {
 			color = <LED_COLOR_ID_GREEN>;
 			default-state = "off";
 			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
 			pinctrl-0 = <&pinctrl_dhcom_i>;
 			pinctrl-names = "default";
-- 
2.51.0