public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Nishanth Menon <nm@ti.com>
To: "Thomas Richard (TI.com)" <thomas.richard@bootlin.com>
Cc: Tero Kristo <kristo@kernel.org>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Gregory CLEMENT <gregory.clement@bootlin.com>,
	<richard.genoud@bootlin.com>, Udit Kumar <u-kumar1@ti.com>,
	Prasanth Mantena <p-mantena@ti.com>,
	"Abhash Kumar" <a-kumar2@ti.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH RFC 1/2] firmware: ti_sci: add BOARDCFG_MANAGED mode support
Date: Fri, 7 Nov 2025 05:41:16 -0600	[thread overview]
Message-ID: <20251107114116.f2laylu5yziueyia@budget> (raw)
In-Reply-To: <20251017-ti-sci-jacinto-s2r-restore-irq-v1-1-34d4339d247a@bootlin.com>

On 16:44-20251017, Thomas Richard (TI.com) wrote:
> In BOARDCFG_MANAGED mode, the low power mode configuration is done
> statically for the DM via the boardcfg. Constraints are not supported, and
> prepare_sleep() is not needed.

Will be good to get pointed to some documentation around this..
> 
> Signed-off-by: Thomas Richard (TI.com) <thomas.richard@bootlin.com>
> ---
>  drivers/firmware/ti_sci.c | 10 +++++++---
>  drivers/firmware/ti_sci.h | 14 ++++++++------
>  2 files changed, 15 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
> index da134ada64e179b4b307f7e0de5ed0f7371a96f2..f9f1a67e8e66b0a4048fae04ce31be54ca5cba7a 100644
> --- a/drivers/firmware/ti_sci.c
> +++ b/drivers/firmware/ti_sci.c
> @@ -3693,8 +3693,11 @@ static int ti_sci_prepare_system_suspend(struct ti_sci_info *info)
>  			return ti_sci_cmd_prepare_sleep(&info->handle,
>  							TISCI_MSG_VALUE_SLEEP_MODE_DM_MANAGED,
>  							0, 0, 0);
> +		} else if (info->fw_caps & MSG_FLAG_CAPS_LPM_BOARDCFG_MANAGED) {
> +			/* Nothing to do in the BOARDCFG_MANAGED mode */
> +			return 0;
>  		} else {
> -			/* DM Managed is not supported by the firmware. */
> +			/* DM Managed and BoardCfg Managed are not supported by the firmware. */
>  			dev_err(info->dev, "Suspend to memory is not supported by the firmware\n");
>  			return -EOPNOTSUPP;
>  		}
> @@ -3932,12 +3935,13 @@ static int ti_sci_probe(struct platform_device *pdev)
>  	}
>  
>  	ti_sci_msg_cmd_query_fw_caps(&info->handle, &info->fw_caps);
> -	dev_dbg(dev, "Detected firmware capabilities: %s%s%s%s%s\n",
> +	dev_dbg(dev, "Detected firmware capabilities: %s%s%s%s%s%s\n",
>  		info->fw_caps & MSG_FLAG_CAPS_GENERIC ? "Generic" : "",
>  		info->fw_caps & MSG_FLAG_CAPS_LPM_PARTIAL_IO ? " Partial-IO" : "",
>  		info->fw_caps & MSG_FLAG_CAPS_LPM_DM_MANAGED ? " DM-Managed" : "",
>  		info->fw_caps & MSG_FLAG_CAPS_LPM_ABORT ? " LPM-Abort" : "",
> -		info->fw_caps & MSG_FLAG_CAPS_IO_ISOLATION ? " IO-Isolation" : ""
> +		info->fw_caps & MSG_FLAG_CAPS_IO_ISOLATION ? " IO-Isolation" : "",
> +		info->fw_caps & MSG_FLAG_CAPS_LPM_BOARDCFG_MANAGED ? " BoardConfig-Managed" : ""
>  	);
>  
>  	ti_sci_setup_ops(info);
> diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
> index 7559cde17b6ccfeeb1bc357fce5c5767c3f75c54..ac1cf6971b8678aa1277abb86d9ec672493f4c86 100644
> --- a/drivers/firmware/ti_sci.h
> +++ b/drivers/firmware/ti_sci.h
> @@ -150,6 +150,7 @@ struct ti_sci_msg_req_reboot {
>   *		MSG_FLAG_CAPS_LPM_DM_MANAGED: LPM can be managed by DM
>   *		MSG_FLAG_CAPS_LPM_ABORT: Abort entry to LPM
>   *		MSG_FLAG_CAPS_IO_ISOLATION: IO Isolation support
> + *		MSG_FLAG_CAPS_LPM_BOARDCFG_MANAGED: LPM config done statically for the DM via boardcfg
>   *
>   * Response to a generic message with message type TI_SCI_MSG_QUERY_FW_CAPS
>   * providing currently available SOC/firmware capabilities. SoC that don't
> @@ -157,12 +158,13 @@ struct ti_sci_msg_req_reboot {
>   */
>  struct ti_sci_msg_resp_query_fw_caps {
>  	struct ti_sci_msg_hdr hdr;
> -#define MSG_FLAG_CAPS_GENERIC		TI_SCI_MSG_FLAG(0)
> -#define MSG_FLAG_CAPS_LPM_PARTIAL_IO	TI_SCI_MSG_FLAG(4)
> -#define MSG_FLAG_CAPS_LPM_DM_MANAGED	TI_SCI_MSG_FLAG(5)
> -#define MSG_FLAG_CAPS_LPM_ABORT		TI_SCI_MSG_FLAG(9)
> -#define MSG_FLAG_CAPS_IO_ISOLATION	TI_SCI_MSG_FLAG(7)
> -#define MSG_MASK_CAPS_LPM		GENMASK_ULL(4, 1)
> +#define MSG_FLAG_CAPS_GENERIC			TI_SCI_MSG_FLAG(0)
> +#define MSG_FLAG_CAPS_LPM_PARTIAL_IO		TI_SCI_MSG_FLAG(4)
> +#define MSG_FLAG_CAPS_LPM_DM_MANAGED		TI_SCI_MSG_FLAG(5)
> +#define MSG_FLAG_CAPS_LPM_ABORT			TI_SCI_MSG_FLAG(9)
> +#define MSG_FLAG_CAPS_IO_ISOLATION		TI_SCI_MSG_FLAG(7)
> +#define MSG_FLAG_CAPS_LPM_BOARDCFG_MANAGED	TI_SCI_MSG_FLAG(10)
> +#define MSG_MASK_CAPS_LPM			GENMASK_ULL(4, 1)

Driveby comment: let us not churn formatting..

>  	u64 fw_caps;
>  } __packed;
>  
> 
> -- 
> 2.51.0
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D
https://ti.com/opensource


  reply	other threads:[~2025-11-07 11:41 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-17 14:44 [PATCH RFC 0/2] firmware: ti_sci: Introduce BOARDCFG_MANAGED mode for Jacinto family Thomas Richard (TI.com)
2025-10-17 14:44 ` [PATCH RFC 1/2] firmware: ti_sci: add BOARDCFG_MANAGED mode support Thomas Richard (TI.com)
2025-11-07 11:41   ` Nishanth Menon [this message]
2025-11-10 15:09     ` Thomas Richard
2025-10-17 14:44 ` [PATCH RFC 2/2] firmware: ti_sci: handle IRQ restore in BOARDCFG_MANAGED mode during resume Thomas Richard (TI.com)
2025-11-07 11:54   ` Nishanth Menon
2025-11-10 15:11     ` Thomas Richard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251107114116.f2laylu5yziueyia@budget \
    --to=nm@ti.com \
    --cc=a-kumar2@ti.com \
    --cc=gregory.clement@bootlin.com \
    --cc=kristo@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=p-mantena@ti.com \
    --cc=richard.genoud@bootlin.com \
    --cc=ssantosh@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=thomas.richard@bootlin.com \
    --cc=u-kumar1@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox