[PATCH v4 13/13] coresight: docs: Document etm4x timestamp interval option

[James Clark <james.clark@linaro.org>]

Document how the new field is used, maximum value and the interaction
with SYNC timestamps.

Signed-off-by: James Clark <james.clark@linaro.org>
---
 Documentation/trace/coresight/coresight.rst | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst
index 806699871b80..80b5ed09d69b 100644
--- a/Documentation/trace/coresight/coresight.rst
+++ b/Documentation/trace/coresight/coresight.rst
@@ -613,8 +613,19 @@ They are also listed in the folder /sys/bus/event_source/devices/cs_etm/format/
      - Session local version of the system wide setting: :ref:`ETM_MODE_RETURNSTACK
        <coresight-return-stack>`
    * - timestamp
-     - Session local version of the system wide setting: :ref:`ETMv4_MODE_TIMESTAMP
-       <coresight-timestamp>`
+     - Controls generation and interval of timestamps.
+
+       0 = off, 1 = maximum interval .. 15 = minimum interval.
+
+       Values 1 - 14 use a counter that decrements every cycle to generate a
+       timestamp on underflow. The reload value for the counter is 2 raised to
+       the power of timestamp interval - 1. If the value is 1 then the reload
+       value is 1, if the value is 11 then the reload value is 1024 etc.
+
+       Setting the minimum interval (15) will disable the counter generated
+       timestamps, freeing the counter resource, leaving only ones emitted when
+       a SYNC packet is generated for every 4096 bytes of trace.
+
    * - cc_threshold
      - Cycle count threshold value. If nothing is provided here or the provided value is 0, then the
        default value i.e 0x100 will be used. If provided value is less than minimum cycles threshold

-- 
2.34.1