From: Christian Bruel <christian.bruel@foss.st.com>
To: "Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Alexandre Torgue" <alexandre.torgue@foss.st.com>
Cc: <linux-pci@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Christian Bruel <christian.bruel@foss.st.com>
Subject: [PATCH] PCI: stm32: Fix LTSSM EP race with start link.
Date: Fri, 14 Nov 2025 08:45:52 +0100 [thread overview]
Message-ID: <20251114-perst_ep-v1-1-e7976317a890@foss.st.com> (raw)
If the host has deasserted PERST# and started link training before the link
is started on EP side, enabling LTSSM before the endpoint registers are
initialized in the perst_irq handler results in probing incorrect values.
Thus, wait for the PERST# level-triggered interrupt to start link training
at the end of initialization and cleanup the stm32_pcie_[start stop]_link
functions.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
drivers/pci/controller/dwc/pcie-stm32-ep.c | 38 ++++++------------------------
1 file changed, 7 insertions(+), 31 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-stm32-ep.c b/drivers/pci/controller/dwc/pcie-stm32-ep.c
index 3400c7cd2d88a279c49ef36a99fc7537c381c384..d0654bb43759bb8d0f0d7badbf7bdae839241fcf 100644
--- a/drivers/pci/controller/dwc/pcie-stm32-ep.c
+++ b/drivers/pci/controller/dwc/pcie-stm32-ep.c
@@ -37,36 +37,9 @@ static void stm32_pcie_ep_init(struct dw_pcie_ep *ep)
dw_pcie_ep_reset_bar(pci, bar);
}
-static int stm32_pcie_enable_link(struct dw_pcie *pci)
-{
- struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
-
- regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
- STM32MP25_PCIECR_LTSSM_EN,
- STM32MP25_PCIECR_LTSSM_EN);
-
- return dw_pcie_wait_for_link(pci);
-}
-
-static void stm32_pcie_disable_link(struct dw_pcie *pci)
-{
- struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
-
- regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR, STM32MP25_PCIECR_LTSSM_EN, 0);
-}
-
static int stm32_pcie_start_link(struct dw_pcie *pci)
{
struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
- int ret;
-
- dev_dbg(pci->dev, "Enable link\n");
-
- ret = stm32_pcie_enable_link(pci);
- if (ret) {
- dev_err(pci->dev, "PCIe cannot establish link: %d\n", ret);
- return ret;
- }
enable_irq(stm32_pcie->perst_irq);
@@ -77,11 +50,7 @@ static void stm32_pcie_stop_link(struct dw_pcie *pci)
{
struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
- dev_dbg(pci->dev, "Disable link\n");
-
disable_irq(stm32_pcie->perst_irq);
-
- stm32_pcie_disable_link(pci);
}
static int stm32_pcie_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
@@ -152,6 +121,8 @@ static void stm32_pcie_perst_assert(struct dw_pcie *pci)
dev_dbg(dev, "PERST asserted by host\n");
+ regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR, STM32MP25_PCIECR_LTSSM_EN, 0);
+
pci_epc_deinit_notify(ep->epc);
stm32_pcie_disable_resources(stm32_pcie);
@@ -192,6 +163,11 @@ static void stm32_pcie_perst_deassert(struct dw_pcie *pci)
pci_epc_init_notify(ep->epc);
+ /* Enable link training */
+ regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+ STM32MP25_PCIECR_LTSSM_EN,
+ STM32MP25_PCIECR_LTSSM_EN);
+
return;
err_disable_resources:
---
base-commit: 31115ecec74fe5c679a149d7037009f26b3aa8a9
change-id: 20251113-perst_ep-0b57b9679cf9
Best regards,
--
Christian Bruel <christian.bruel@foss.st.com>
next reply other threads:[~2025-11-14 7:46 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-14 7:45 Christian Bruel [this message]
2025-11-14 18:59 ` [PATCH] PCI: stm32: Fix LTSSM EP race with start link Bjorn Helgaas
2025-11-17 12:04 ` Christian Bruel
2025-11-17 20:00 ` Bjorn Helgaas
2025-11-18 18:34 ` Christian Bruel
2025-11-18 21:28 ` Bjorn Helgaas
2025-11-19 15:13 ` Christian Bruel
2025-11-19 15:47 ` Manivannan Sadhasivam
2025-11-17 15:10 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251114-perst_ep-v1-1-e7976317a890@foss.st.com \
--to=christian.bruel@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=bhelgaas@google.com \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).