From: Jinjie Ruan <ruanjinjie@huawei.com>
To: <catalin.marinas@arm.com>, <will@kernel.org>, <oleg@redhat.com>,
<tglx@linutronix.de>, <peterz@infradead.org>, <luto@kernel.org>,
<shuah@kernel.org>, <kees@kernel.org>, <wad@chromium.org>,
<akpm@linux-foundation.org>, <ldv@strace.io>, <macro@orcam.me.uk>,
<deller@gmx.de>, <mark.rutland@arm.com>, <song@kernel.org>,
<mbenes@suse.cz>, <ryan.roberts@arm.com>,
<ada.coupriediaz@arm.com>, <anshuman.khandual@arm.com>,
<broonie@kernel.org>, <kevin.brodsky@arm.com>,
<pengcan@kylinos.cn>, <dvyukov@google.com>, <kmal@cock.li>,
<lihongbo22@huawei.com>, <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-kselftest@vger.kernel.org>
Cc: <ruanjinjie@huawei.com>
Subject: [PATCH v7 03/11] arm64/ptrace: Refator el0_svc_common()
Date: Mon, 17 Nov 2025 21:30:40 +0800 [thread overview]
Message-ID: <20251117133048.53182-4-ruanjinjie@huawei.com> (raw)
In-Reply-To: <20251117133048.53182-1-ruanjinjie@huawei.com>
Compared to the generic entry code, arm64 terminate the process
after report_syscall_exit() if the syscall is issued within
a restartable sequence.
In preparation for moving arm64 over to the generic entry code,
refactor el0_svc_common() as below:
- Extract syscall_exit_to_user_mode_prepare() to replace the
the combination of read_thread_flags() and syscall_trace_exit(),
also move the syscall exit check logic into it.
- Move rseq_syscall() ahead, so the CONFIG_DEBUG_RSEQ check is
not needed.
- Move has_syscall_work() helper into asm/syscall.h, which will be
reused by ptrace.c.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
---
arch/arm64/include/asm/syscall.h | 7 ++++++-
arch/arm64/kernel/ptrace.c | 10 +++++++++-
arch/arm64/kernel/syscall.c | 26 +++++---------------------
3 files changed, 20 insertions(+), 23 deletions(-)
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index d69f590a989b..6225981fbbdb 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -114,7 +114,12 @@ static inline int syscall_get_arch(struct task_struct *task)
return AUDIT_ARCH_AARCH64;
}
+static inline bool has_syscall_work(unsigned long flags)
+{
+ return unlikely(flags & _TIF_SYSCALL_WORK);
+}
+
int syscall_trace_enter(struct pt_regs *regs, long syscall, unsigned long flags);
-void syscall_trace_exit(struct pt_regs *regs, unsigned long flags);
+void syscall_exit_to_user_mode_prepare(struct pt_regs *regs);
#endif /* __ASM_SYSCALL_H */
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index bbb868f6b292..95984bbf53db 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -2403,7 +2403,7 @@ int syscall_trace_enter(struct pt_regs *regs, long syscall, unsigned long flags)
return regs->syscallno;
}
-void syscall_trace_exit(struct pt_regs *regs, unsigned long flags)
+static void syscall_trace_exit(struct pt_regs *regs, unsigned long flags)
{
audit_syscall_exit(regs);
@@ -2412,8 +2412,16 @@ void syscall_trace_exit(struct pt_regs *regs, unsigned long flags)
if (flags & (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP))
report_syscall_exit(regs);
+}
+
+void syscall_exit_to_user_mode_prepare(struct pt_regs *regs)
+{
+ unsigned long flags = read_thread_flags();
rseq_syscall(regs);
+
+ if (has_syscall_work(flags) || flags & _TIF_SINGLESTEP)
+ syscall_trace_exit(regs, flags);
}
/*
diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c
index 6e3fe760e0bb..9713b038d750 100644
--- a/arch/arm64/kernel/syscall.c
+++ b/arch/arm64/kernel/syscall.c
@@ -65,11 +65,6 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno,
choose_random_kstack_offset(get_random_u16());
}
-static inline bool has_syscall_work(unsigned long flags)
-{
- return unlikely(flags & _TIF_SYSCALL_WORK);
-}
-
static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
const syscall_fn_t syscall_table[])
{
@@ -125,26 +120,15 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
if (scno == NO_SYSCALL)
syscall_set_return_value(current, regs, -ENOSYS, 0);
scno = syscall_trace_enter(regs, regs->syscallno, flags);
- if (scno == NO_SYSCALL)
- goto trace_exit;
+ if (scno == NO_SYSCALL) {
+ syscall_exit_to_user_mode_prepare(regs);
+ return;
+ }
}
invoke_syscall(regs, scno, sc_nr, syscall_table);
- /*
- * The tracing status may have changed under our feet, so we have to
- * check again. However, if we were tracing entry, then we always trace
- * exit regardless, as the old entry assembly did.
- */
- if (!has_syscall_work(flags) && !IS_ENABLED(CONFIG_DEBUG_RSEQ)) {
- flags = read_thread_flags();
- if (!has_syscall_work(flags) && !(flags & _TIF_SINGLESTEP))
- return;
- }
-
-trace_exit:
- flags = read_thread_flags();
- syscall_trace_exit(regs, flags);
+ syscall_exit_to_user_mode_prepare(regs);
}
void do_el0_svc(struct pt_regs *regs)
--
2.34.1
next prev parent reply other threads:[~2025-11-17 13:31 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-17 13:30 [PATCH v7 00/11] arm64: entry: Convert to Generic Entry Jinjie Ruan
2025-11-17 13:30 ` [PATCH v7 01/11] arm64/ptrace: Split report_syscall() Jinjie Ruan
2025-11-18 17:09 ` Kevin Brodsky
2025-11-19 9:49 ` Jinjie Ruan
2025-11-17 13:30 ` [PATCH v7 02/11] arm64/ptrace: Refactor syscall_trace_enter/exit() Jinjie Ruan
2025-11-18 17:09 ` Kevin Brodsky
2025-11-20 11:05 ` Jinjie Ruan
2025-11-17 13:30 ` Jinjie Ruan [this message]
2025-11-18 17:10 ` [PATCH v7 03/11] arm64/ptrace: Refator el0_svc_common() Kevin Brodsky
2025-11-20 12:03 ` Jinjie Ruan
2025-11-17 13:30 ` [PATCH v7 04/11] entry: Add syscall_exit_to_user_mode_prepare() helper Jinjie Ruan
2025-11-17 13:43 ` Thomas Gleixner
2025-11-18 17:11 ` Kevin Brodsky
2025-11-17 13:30 ` [PATCH v7 05/11] arm64/ptrace: Handle ptrace_report_syscall_entry() error Jinjie Ruan
2025-11-18 17:12 ` Kevin Brodsky
2025-11-21 4:15 ` Jinjie Ruan
2025-11-24 9:16 ` Kevin Brodsky
2025-11-17 13:30 ` [PATCH v7 06/11] arm64/ptrace: Expand secure_computing() in place Jinjie Ruan
2025-11-18 17:12 ` Kevin Brodsky
2025-11-21 7:29 ` Jinjie Ruan
2025-11-17 13:30 ` [PATCH v7 07/11] arm64/ptrace: Use syscall_get_arguments() heleper Jinjie Ruan
2025-11-18 17:12 ` Kevin Brodsky
2025-11-17 13:30 ` [PATCH v7 08/11] entry: Add arch_ptrace_report_syscall_entry/exit() Jinjie Ruan
2025-11-18 17:13 ` Kevin Brodsky
2025-11-24 9:34 ` Jinjie Ruan
2025-11-17 13:30 ` [PATCH v7 09/11] entry: Add has_syscall_work() helper Jinjie Ruan
2025-11-18 17:13 ` Kevin Brodsky
2025-11-17 13:30 ` [PATCH v7 10/11] arm64: entry: Convert to generic entry Jinjie Ruan
2025-11-18 17:14 ` Kevin Brodsky
2025-11-17 13:30 ` [PATCH v7 11/11] selftests: sud_test: Support aarch64 Jinjie Ruan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251117133048.53182-4-ruanjinjie@huawei.com \
--to=ruanjinjie@huawei.com \
--cc=ada.coupriediaz@arm.com \
--cc=akpm@linux-foundation.org \
--cc=anshuman.khandual@arm.com \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=deller@gmx.de \
--cc=dvyukov@google.com \
--cc=kees@kernel.org \
--cc=kevin.brodsky@arm.com \
--cc=kmal@cock.li \
--cc=ldv@strace.io \
--cc=lihongbo22@huawei.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=luto@kernel.org \
--cc=macro@orcam.me.uk \
--cc=mark.rutland@arm.com \
--cc=mbenes@suse.cz \
--cc=oleg@redhat.com \
--cc=pengcan@kylinos.cn \
--cc=peterz@infradead.org \
--cc=ryan.roberts@arm.com \
--cc=shuah@kernel.org \
--cc=song@kernel.org \
--cc=tglx@linutronix.de \
--cc=wad@chromium.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).