From: Mostafa Saleh <smostafa@google.com>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kvmarm@lists.linux.dev,
iommu@lists.linux.dev
Cc: catalin.marinas@arm.com, will@kernel.org, maz@kernel.org,
oliver.upton@linux.dev, joey.gouly@arm.com,
suzuki.poulose@arm.com, yuzenghui@huawei.com, joro@8bytes.org,
jean-philippe@linaro.org, jgg@ziepe.ca, praan@google.com,
danielmentz@google.com, mark.rutland@arm.com,
qperret@google.com, tabba@google.com,
Mostafa Saleh <smostafa@google.com>
Subject: [PATCH v5 07/27] iommu/arm-smmu-v3: Move IDR parsing to common functions
Date: Mon, 17 Nov 2025 18:47:54 +0000 [thread overview]
Message-ID: <20251117184815.1027271-8-smostafa@google.com> (raw)
In-Reply-To: <20251117184815.1027271-1-smostafa@google.com>
Move parsing of IDRs to functions so that it can be re-used
from the hypervisor.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
---
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 112 +++-----------------
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 111 +++++++++++++++++++
2 files changed, 126 insertions(+), 97 deletions(-)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index f6c3eeb4ecea..7b1bd0658910 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -4109,57 +4109,17 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
/* IDR0 */
reg = readl_relaxed(smmu->base + ARM_SMMU_IDR0);
- /* 2-level structures */
- if (FIELD_GET(IDR0_ST_LVL, reg) == IDR0_ST_LVL_2LVL)
- smmu->features |= ARM_SMMU_FEAT_2_LVL_STRTAB;
-
- if (reg & IDR0_CD2L)
- smmu->features |= ARM_SMMU_FEAT_2_LVL_CDTAB;
-
- /*
- * Translation table endianness.
- * We currently require the same endianness as the CPU, but this
- * could be changed later by adding a new IO_PGTABLE_QUIRK.
- */
- switch (FIELD_GET(IDR0_TTENDIAN, reg)) {
- case IDR0_TTENDIAN_MIXED:
- smmu->features |= ARM_SMMU_FEAT_TT_LE | ARM_SMMU_FEAT_TT_BE;
- break;
-#ifdef __BIG_ENDIAN
- case IDR0_TTENDIAN_BE:
- smmu->features |= ARM_SMMU_FEAT_TT_BE;
- break;
-#else
- case IDR0_TTENDIAN_LE:
- smmu->features |= ARM_SMMU_FEAT_TT_LE;
- break;
-#endif
- default:
+ smmu->features |= smmu_idr0_features(reg);
+ if (FIELD_GET(IDR0_TTENDIAN, reg) == IDR0_TTENDIAN_RESERVED) {
dev_err(smmu->dev, "unknown/unsupported TT endianness!\n");
return -ENXIO;
}
-
- /* Boolean feature flags */
- if (IS_ENABLED(CONFIG_PCI_PRI) && reg & IDR0_PRI)
- smmu->features |= ARM_SMMU_FEAT_PRI;
-
- if (IS_ENABLED(CONFIG_PCI_ATS) && reg & IDR0_ATS)
- smmu->features |= ARM_SMMU_FEAT_ATS;
-
- if (reg & IDR0_SEV)
- smmu->features |= ARM_SMMU_FEAT_SEV;
-
- if (reg & IDR0_MSI) {
- smmu->features |= ARM_SMMU_FEAT_MSI;
- if (coherent && !disable_msipolling)
- smmu->options |= ARM_SMMU_OPT_MSIPOLL;
- }
-
- if (reg & IDR0_HYP) {
- smmu->features |= ARM_SMMU_FEAT_HYP;
- if (cpus_have_cap(ARM64_HAS_VIRT_HOST_EXTN))
- smmu->features |= ARM_SMMU_FEAT_E2H;
- }
+ if (coherent && !disable_msipolling &&
+ smmu->features & ARM_SMMU_FEAT_MSI)
+ smmu->options |= ARM_SMMU_OPT_MSIPOLL;
+ if (smmu->features & ARM_SMMU_FEAT_HYP &&
+ cpus_have_cap(ARM64_HAS_VIRT_HOST_EXTN))
+ smmu->features |= ARM_SMMU_FEAT_E2H;
arm_smmu_get_httu(smmu, reg);
@@ -4171,21 +4131,7 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
dev_warn(smmu->dev, "IDR0.COHACC overridden by FW configuration (%s)\n",
str_true_false(coherent));
- switch (FIELD_GET(IDR0_STALL_MODEL, reg)) {
- case IDR0_STALL_MODEL_FORCE:
- smmu->features |= ARM_SMMU_FEAT_STALL_FORCE;
- fallthrough;
- case IDR0_STALL_MODEL_STALL:
- smmu->features |= ARM_SMMU_FEAT_STALLS;
- }
-
- if (reg & IDR0_S1P)
- smmu->features |= ARM_SMMU_FEAT_TRANS_S1;
-
- if (reg & IDR0_S2P)
- smmu->features |= ARM_SMMU_FEAT_TRANS_S2;
-
- if (!(reg & (IDR0_S1P | IDR0_S2P))) {
+ if (!(smmu->features & (ARM_SMMU_FEAT_TRANS_S1 | ARM_SMMU_FEAT_TRANS_S2))) {
dev_err(smmu->dev, "no translation support!\n");
return -ENXIO;
}
@@ -4250,10 +4196,7 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
/* IDR3 */
reg = readl_relaxed(smmu->base + ARM_SMMU_IDR3);
- if (FIELD_GET(IDR3_RIL, reg))
- smmu->features |= ARM_SMMU_FEAT_RANGE_INV;
- if (FIELD_GET(IDR3_FWB, reg))
- smmu->features |= ARM_SMMU_FEAT_S2FWB;
+ smmu->features |= smmu_idr3_features(reg);
if (FIELD_GET(IDR3_BBM, reg) == 2)
smmu->features |= ARM_SMMU_FEAT_BBML2;
@@ -4265,43 +4208,18 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
smmu->evtq.max_stalls = FIELD_GET(IDR5_STALL_MAX, reg);
/* Page sizes */
- if (reg & IDR5_GRAN64K)
- smmu->pgsize_bitmap |= SZ_64K | SZ_512M;
- if (reg & IDR5_GRAN16K)
- smmu->pgsize_bitmap |= SZ_16K | SZ_32M;
- if (reg & IDR5_GRAN4K)
- smmu->pgsize_bitmap |= SZ_4K | SZ_2M | SZ_1G;
+ smmu->pgsize_bitmap = smmu_idr5_to_pgsize(reg);
/* Input address size */
if (FIELD_GET(IDR5_VAX, reg) == IDR5_VAX_52_BIT)
smmu->features |= ARM_SMMU_FEAT_VAX;
- /* Output address size */
- switch (FIELD_GET(IDR5_OAS, reg)) {
- case IDR5_OAS_32_BIT:
- smmu->oas = 32;
- break;
- case IDR5_OAS_36_BIT:
- smmu->oas = 36;
- break;
- case IDR5_OAS_40_BIT:
- smmu->oas = 40;
- break;
- case IDR5_OAS_42_BIT:
- smmu->oas = 42;
- break;
- case IDR5_OAS_44_BIT:
- smmu->oas = 44;
- break;
- case IDR5_OAS_52_BIT:
- smmu->oas = 52;
+ smmu->oas = smmu_idr5_to_oas(reg);
+ if (smmu->oas == 52)
smmu->pgsize_bitmap |= 1ULL << 42; /* 4TB */
- break;
- default:
+ else if (!smmu->oas) {
dev_info(smmu->dev,
- "unknown output address size. Truncating to 48-bit\n");
- fallthrough;
- case IDR5_OAS_48_BIT:
+ "unknown output address size. Truncating to 48-bit\n");
smmu->oas = 48;
}
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
index 4a59b4d39c4f..309194ceebe7 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
@@ -27,6 +27,7 @@ struct arm_vsmmu;
#define IDR0_STALL_MODEL_FORCE 2
#define IDR0_TTENDIAN GENMASK(22, 21)
#define IDR0_TTENDIAN_MIXED 0
+#define IDR0_TTENDIAN_RESERVED 1
#define IDR0_TTENDIAN_LE 2
#define IDR0_TTENDIAN_BE 3
#define IDR0_CD2L (1 << 19)
@@ -1072,6 +1073,116 @@ static inline void arm_smmu_write_strtab_l1_desc(struct arm_smmu_strtab_l1 *dst,
WRITE_ONCE(dst->l2ptr, cpu_to_le64(val));
}
+static inline u32 smmu_idr0_features(u32 reg)
+{
+ u32 features = 0;
+
+ /* 2-level structures */
+ if (FIELD_GET(IDR0_ST_LVL, reg) == IDR0_ST_LVL_2LVL)
+ features |= ARM_SMMU_FEAT_2_LVL_STRTAB;
+
+ if (reg & IDR0_CD2L)
+ features |= ARM_SMMU_FEAT_2_LVL_CDTAB;
+
+ /*
+ * Translation table endianness.
+ * We currently require the same endianness as the CPU, but this
+ * could be changed later by adding a new IO_PGTABLE_QUIRK.
+ */
+ switch (FIELD_GET(IDR0_TTENDIAN, reg)) {
+ case IDR0_TTENDIAN_MIXED:
+ features |= ARM_SMMU_FEAT_TT_LE | ARM_SMMU_FEAT_TT_BE;
+ break;
+#ifdef __BIG_ENDIAN
+ case IDR0_TTENDIAN_BE:
+ features |= ARM_SMMU_FEAT_TT_BE;
+ break;
+#else
+ case IDR0_TTENDIAN_LE:
+ features |= ARM_SMMU_FEAT_TT_LE;
+ break;
+#endif
+ }
+
+ /* Boolean feature flags */
+ if (IS_ENABLED(CONFIG_PCI_PRI) && reg & IDR0_PRI)
+ features |= ARM_SMMU_FEAT_PRI;
+
+ if (IS_ENABLED(CONFIG_PCI_ATS) && reg & IDR0_ATS)
+ features |= ARM_SMMU_FEAT_ATS;
+
+ if (reg & IDR0_SEV)
+ features |= ARM_SMMU_FEAT_SEV;
+
+ if (reg & IDR0_MSI)
+ features |= ARM_SMMU_FEAT_MSI;
+
+ if (reg & IDR0_HYP)
+ features |= ARM_SMMU_FEAT_HYP;
+
+ switch (FIELD_GET(IDR0_STALL_MODEL, reg)) {
+ case IDR0_STALL_MODEL_FORCE:
+ features |= ARM_SMMU_FEAT_STALL_FORCE;
+ fallthrough;
+ case IDR0_STALL_MODEL_STALL:
+ features |= ARM_SMMU_FEAT_STALLS;
+ }
+
+ if (reg & IDR0_S1P)
+ features |= ARM_SMMU_FEAT_TRANS_S1;
+
+ if (reg & IDR0_S2P)
+ features |= ARM_SMMU_FEAT_TRANS_S2;
+
+ return features;
+}
+
+static inline u32 smmu_idr3_features(u32 reg)
+{
+ u32 features = 0;
+
+ if (FIELD_GET(IDR3_RIL, reg))
+ features |= ARM_SMMU_FEAT_RANGE_INV;
+ if (FIELD_GET(IDR3_FWB, reg))
+ features |= ARM_SMMU_FEAT_S2FWB;
+
+ return features;
+}
+
+static inline u32 smmu_idr5_to_oas(u32 reg)
+{
+ switch (FIELD_GET(IDR5_OAS, reg)) {
+ case IDR5_OAS_32_BIT:
+ return 32;
+ case IDR5_OAS_36_BIT:
+ return 36;
+ case IDR5_OAS_40_BIT:
+ return 40;
+ case IDR5_OAS_42_BIT:
+ return 42;
+ case IDR5_OAS_44_BIT:
+ return 44;
+ case IDR5_OAS_48_BIT:
+ return 48;
+ case IDR5_OAS_52_BIT:
+ return 52;
+ }
+ return 0;
+}
+
+static inline unsigned long smmu_idr5_to_pgsize(u32 reg)
+{
+ unsigned long pgsize_bitmap = 0;
+
+ if (reg & IDR5_GRAN64K)
+ pgsize_bitmap |= SZ_64K | SZ_512M;
+ if (reg & IDR5_GRAN16K)
+ pgsize_bitmap |= SZ_16K | SZ_32M;
+ if (reg & IDR5_GRAN4K)
+ pgsize_bitmap |= SZ_4K | SZ_2M | SZ_1G;
+ return pgsize_bitmap;
+}
+
/**
* arm_smmu_tlb_inv_build - Create a range invalidation command
* @cmd: Base command initialized with OPCODE (S1, S2..), vmid and asid.
--
2.52.0.rc1.455.g30608eb744-goog
next prev parent reply other threads:[~2025-11-17 18:48 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-17 18:47 [PATCH v5 00/27] KVM: arm64: SMMUv3 driver for pKVM (trap and emulate) Mostafa Saleh
2025-11-17 18:47 ` [PATCH v5 01/27] KVM: arm64: Add a new function to donate memory with prot Mostafa Saleh
2025-11-17 18:47 ` [PATCH v5 02/27] KVM: arm64: Donate MMIO to the hypervisor Mostafa Saleh
2025-11-17 18:47 ` [PATCH v5 03/27] KVM: arm64: pkvm: Add pkvm_time_get() Mostafa Saleh
2025-11-17 18:47 ` [PATCH v5 04/27] iommu/io-pgtable-arm: Factor kernel specific code out Mostafa Saleh
2025-11-28 16:45 ` Jason Gunthorpe
2025-12-12 15:37 ` Mostafa Saleh
2025-12-16 0:58 ` Jason Gunthorpe
2025-12-16 23:08 ` Mostafa Saleh
2025-11-17 18:47 ` [PATCH v5 05/27] iommu/arm-smmu-v3: Split code with hyp Mostafa Saleh
2025-11-28 16:46 ` Jason Gunthorpe
2025-12-12 15:41 ` Mostafa Saleh
2025-11-17 18:47 ` [PATCH v5 06/27] iommu/arm-smmu-v3: Move TLB range invalidation into common code Mostafa Saleh
2025-11-17 18:47 ` Mostafa Saleh [this message]
2025-11-28 16:48 ` [PATCH v5 07/27] iommu/arm-smmu-v3: Move IDR parsing to common functions Jason Gunthorpe
2025-12-12 15:42 ` Mostafa Saleh
2025-12-17 13:59 ` Jason Gunthorpe
2025-11-17 18:47 ` [PATCH v5 08/27] KVM: arm64: iommu: Introduce IOMMU driver infrastructure Mostafa Saleh
2025-11-17 18:47 ` [PATCH v5 09/27] KVM: arm64: iommu: Shadow host stage-2 page table Mostafa Saleh
2025-11-17 18:47 ` [PATCH v5 10/27] KVM: arm64: iommu: Add memory pool Mostafa Saleh
2025-11-17 18:47 ` [PATCH v5 11/27] KVM: arm64: iommu: Support DABT for IOMMU Mostafa Saleh
2025-11-17 18:47 ` [PATCH v5 12/27] iommu/arm-smmu-v3-kvm: Add SMMUv3 driver Mostafa Saleh
2025-11-17 18:48 ` [PATCH v5 13/27] iommu/arm-smmu-v3-kvm: Add the kernel driver Mostafa Saleh
2025-11-17 18:48 ` [PATCH v5 14/27] iommu/arm-smmu-v3: Support probing KVM emulated devices Mostafa Saleh
2025-11-28 16:56 ` Jason Gunthorpe
2025-12-12 15:53 ` Mostafa Saleh
2025-12-17 14:00 ` Jason Gunthorpe
2025-11-17 18:48 ` [PATCH v5 15/27] iommu/arm-smmu-v3-kvm: Create array for hyp SMMUv3 Mostafa Saleh
2025-11-17 18:48 ` [PATCH v5 16/27] iommu/arm-smmu-v3-kvm: Take over SMMUs Mostafa Saleh
2025-11-17 18:48 ` [PATCH v5 17/27] iommu/arm-smmu-v3-kvm: Probe SMMU HW Mostafa Saleh
2025-11-28 17:07 ` Jason Gunthorpe
2025-12-12 16:07 ` Mostafa Saleh
2025-11-17 18:48 ` [PATCH v5 18/27] iommu/arm-smmu-v3-kvm: Add MMIO emulation Mostafa Saleh
2025-11-17 18:48 ` [PATCH v5 19/27] iommu/arm-smmu-v3-kvm: Shadow the command queue Mostafa Saleh
2025-11-17 18:48 ` [PATCH v5 20/27] iommu/arm-smmu-v3-kvm: Add CMDQ functions Mostafa Saleh
2025-11-17 18:48 ` [PATCH v5 21/27] iommu/arm-smmu-v3-kvm: Emulate CMDQ for host Mostafa Saleh
2025-11-17 18:48 ` [PATCH v5 22/27] iommu/arm-smmu-v3-kvm: Shadow stream table Mostafa Saleh
2025-11-17 18:48 ` [PATCH v5 23/27] iommu/arm-smmu-v3-kvm: Shadow STEs Mostafa Saleh
2025-11-17 18:48 ` [PATCH v5 24/27] iommu/arm-smmu-v3-kvm: Emulate GBPA Mostafa Saleh
2025-11-17 18:48 ` [PATCH v5 25/27] iommu/arm-smmu-v3-kvm: Support io-pgtable Mostafa Saleh
2025-11-17 18:48 ` [PATCH v5 26/27] iommu/arm-smmu-v3-kvm: Shadow the CPU stage-2 page table Mostafa Saleh
2025-11-17 18:48 ` [PATCH v5 27/27] iommu/arm-smmu-v3-kvm: Enable nesting Mostafa Saleh
2025-11-28 17:12 ` Jason Gunthorpe
2025-12-12 16:15 ` Mostafa Saleh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251117184815.1027271-8-smostafa@google.com \
--to=smostafa@google.com \
--cc=catalin.marinas@arm.com \
--cc=danielmentz@google.com \
--cc=iommu@lists.linux.dev \
--cc=jean-philippe@linaro.org \
--cc=jgg@ziepe.ca \
--cc=joey.gouly@arm.com \
--cc=joro@8bytes.org \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=oliver.upton@linux.dev \
--cc=praan@google.com \
--cc=qperret@google.com \
--cc=suzuki.poulose@arm.com \
--cc=tabba@google.com \
--cc=will@kernel.org \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).