From: Bjorn Helgaas <helgaas@kernel.org>
To: Anand Moon <linux.amoon@gmail.com>
Cc: "Shawn Lin" <shawn.lin@rock-chips.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Heiko Stuebner" <heiko@sntech.de>,
"open list:PCIE DRIVER FOR ROCKCHIP" <linux-pci@vger.kernel.org>,
"open list:PCIE DRIVER FOR ROCKCHIP"
<linux-rockchip@lists.infradead.org>,
"moderated list:ARM/Rockchip SoC support"
<linux-arm-kernel@lists.infradead.org>,
"open list" <linux-kernel@vger.kernel.org>
Subject: Re: [RFC v1 1/5] PCI: rockchip: Fix Link Control register offset and enable ASPM/CLKREQ
Date: Wed, 19 Nov 2025 21:44:37 -0600 [thread overview]
Message-ID: <20251120034437.GA2625966@bhelgaas> (raw)
In-Reply-To: <CANAwSgRHuwoQjr95sXp-X97=L-X3vqUPxjR5=2jNtFZA+4gnwQ@mail.gmail.com>
On Wed, Nov 19, 2025 at 07:49:06PM +0530, Anand Moon wrote:
> On Tue, 18 Nov 2025 at 23:20, Bjorn Helgaas <helgaas@kernel.org> wrote:
> > On Mon, Nov 17, 2025 at 11:40:09PM +0530, Anand Moon wrote:
> > > As per the RK3399 TRM (Part 2, 17.6.6.1.31), the Link Control register
> > > (RC_CONFIG_LC) resides at an offset of 0xd0 within the Root Complex (RC)
> > > configuration space, not at the offset of the PCI Express Capability List
> > > (0xc0). Following changes correct the register offset to use
> > > PCIE_RC_CONFIG_LC (0xd0) to configure link control.
> ...
> > Don't do two things at once in the same patch. Fix the register
> > offset in one patch. Actually, as I mentioned at [1], there's a lot
> > of fixing to do there, and I'm not even going to consider other
> > changes until the #define mess is cleaned up.
> > [1] https://lore.kernel.org/r/20251118005056.GA2541796@bhelgaas
>
> According to the RK3399 Technical Reference Manual (TRM), and pci_regs.h
> already includes the correct, pre-defined offsets for all PCI Express
> device types
> and their capabilities registers. To avoid overlapping register mappings,
> we should explicitly remove the addition of manual offsets within the code.
> Here is the example. Is this the correct approach?
> - status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_CR +
> PCI_EXP_LNKCTL);
> + status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_LC);
> status |= (PCI_EXP_LNKCTL_LBMIE | PCI_EXP_LNKCTL_LABIE);
> - rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_CR +
> PCI_EXP_LNKCTL);
> + rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_LC);
No. The call should include PCI_EXP_LNKCTL because that's what we
grep for when we want to see where Link Control is updated.
See my example from [1] above:
rockchip_pcie_read(rockchip, ROCKCHIP_RP_PCIE_CAP + PCI_EXP_DEVCAP)
rockchip_pcie_read(rockchip, ROCKCHIP_RP_PCIE_CAP + PCI_EXP_LNKCTL)
You should have a single #define for the offset of the PCIe
Capability, e.g., ROCKCHIP_RP_PCIE_CAP. Every access to registers in
that capability would use ROCKCHIP_RP_PCIE_CAP and the relevant
PCI_EXP_* offset, e.g., PCI_EXP_DEVCAP, PCI_EXP_DEVCTL,
PCI_EXP_DEVSTA, PCI_EXP_LNKCAP, PCI_EXP_LNKCTL, PCI_EXP_LNKSTA, etc.
Bjorn
next prev parent reply other threads:[~2025-11-20 3:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-17 18:10 [RFC v1 0/5] Fix some register offset as per RK3399 TRM part 2 Anand Moon
2025-11-17 18:10 ` [RFC v1 1/5] PCI: rockchip: Fix Link Control register offset and enable ASPM/CLKREQ Anand Moon
2025-11-18 17:50 ` Bjorn Helgaas
2025-11-19 14:19 ` Anand Moon
2025-11-20 3:44 ` Bjorn Helgaas [this message]
2025-11-20 13:58 ` Anand Moon
2025-11-26 10:33 ` Anand Moon
2025-11-26 14:39 ` Bjorn Helgaas
2025-11-27 7:34 ` Anand Moon
2025-11-17 18:10 ` [RFC v1 2/5] PCI: rockchip: Fix Device Control register offset for Max payload size Anand Moon
2025-11-18 0:50 ` Bjorn Helgaas
2025-11-18 11:16 ` Anand Moon
2025-11-17 18:10 ` [RFC v1 3/5] PCI: rockchip: Fix Slot Capability Register offset for slot power limit Anand Moon
2025-11-17 18:10 ` [RFC v1 4/5] PCI: rockchip: Fix Link Control and Status Register 2 for target link speed Anand Moon
2025-11-17 18:10 ` [RFC v1 5/5] PCI: rockchip: Fix Linkwidth Control Register offset for Retrain Link Anand Moon
2025-11-18 0:54 ` [RFC v1 0/5] Fix some register offset as per RK3399 TRM part 2 Shawn Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251120034437.GA2625966@bhelgaas \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=heiko@sntech.de \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux.amoon@gmail.com \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=robh@kernel.org \
--cc=shawn.lin@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox