[PATCH 2/3] arm64: dts: ti: k3-am642-phyboard-electra-x27-gpio1-spi1-uart3: Fix schema warnings

[Wadim Egorov <w.egorov@phytec.de>]

Rename pinctrl nodes to comply with naming conventions required by
pinctrl-single schema. Also, replace invalid integer assignment in
SPI node with a boolean to align with omap-spi schema.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
 .../k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso   | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso
index 996c42ec4253..bea8efa3e909 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso
@@ -20,13 +20,13 @@ aliases {
 };
 
 &main_pmx0 {
-	main_gpio1_exp_header_gpio_pins_default: main-gpio1-exp-header-gpio-pins-default {
+	main_gpio1_exp_header_gpio_pins_default: main-gpio1-exp-header-gpio-default-pins {
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0220, PIN_INPUT, 7)	/* (D14) SPI1_CS1.GPIO1_48 */
 		>;
 	};
 
-	main_spi1_pins_default: main-spi1-pins-default {
+	main_spi1_pins_default: main-spi1-default-pins {
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0224, PIN_INPUT, 0)	/* (C14) SPI1_CLK */
 			AM64X_IOPAD(0x021C, PIN_OUTPUT, 0)	/* (B14) SPI1_CS0 */
@@ -35,7 +35,7 @@ AM64X_IOPAD(0x022C, PIN_INPUT, 0)	/* (A15) SPI1_D1 */
 		>;
 	};
 
-	main_uart3_pins_default: main-uart3-pins-default {
+	main_uart3_pins_default: main-uart3-default-pins {
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0048, PIN_INPUT, 2)       /* (U20) GPMC0_AD3.UART3_RXD */
 			AM64X_IOPAD(0x004c, PIN_OUTPUT, 2)      /* (U18) GPMC0_AD4.UART3_TXD */
@@ -52,7 +52,7 @@ &main_gpio1 {
 &main_spi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_spi1_pins_default>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 	status = "okay";
 };
 
-- 
2.48.1