[PATCH 0/5] Add support for Ezurio MediaTek platforms

[PATCH 0/5] Add support for Ezurio MediaTek platforms

[Gary Bisson]

This series adds support for Ezurio MediaTek platforms called
"Tungsten". It includes support for MT8370-based Tungsten 510 and
MT8390-based Tungsten 700 SOMs.

Regards,

Gary Bisson (5):
  dt-bindings: vendor-prefixes: Add Ezurio LLC
  dt-bindings: arm: mediatek: Add ezurio,mt8370-tungsten-smarc
  dt-bindings: arm: mediatek: Add ezurio,mt8390-tungsten-smarc
  arm64: dts: mediatek: add device tree for Tungsten 510 board
  arm64: dts: mediatek: add device tree for Tungsten 700 board

 .../devicetree/bindings/arm/mediatek.yaml     |    2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 arch/arm64/boot/dts/mediatek/Makefile         |    2 +
 .../dts/mediatek/mt8370-tungsten-smarc.dts    |   14 +
 .../dts/mediatek/mt8390-tungsten-smarc.dts    |   22 +
 .../dts/mediatek/mt83x0-tungsten-smarc.dtsi   | 1481 +++++++++++++++++
 6 files changed, 1523 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8370-tungsten-smarc.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8390-tungsten-smarc.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt83x0-tungsten-smarc.dtsi

-- 
2.43.0

[PATCH 1/5] dt-bindings: vendor-prefixes: Add Ezurio LLC

[Gary Bisson]

Ezurio is the new name of Laird Connectivity after it acquired Boundary
Devices.

Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
---
Cc: robh@kernel.org
Cc: krzk+dt@kernel.org
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index f1d1882009ba..e76e6c5be726 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -547,6 +547,8 @@ patternProperties:
     description: Exegin Technologies Limited
   "^ezchip,.*":
     description: EZchip Semiconductor
+  "^ezurio,.*":
+    description: Ezurio LLC
   "^facebook,.*":
     description: Facebook
   "^fairchild,.*":
-- 
2.43.0

[PATCH 2/5] dt-bindings: arm: mediatek: Add ezurio,mt8370-tungsten-smarc

[Gary Bisson]

Add device tree bindings support for the Ezurio Tungsten 510 (MT8370)
SMARC SOM [1] + Universal SMARC carrier board [2].

[1] https://www.ezurio.com/product/tungsten510-smarc
[2]
https://www.ezurio.com/system-on-module/accessories/universal-smarc-carrier

Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
---
Cc: robh@kernel.org
Cc: krzk+dt@kernel.org
Cc: conor+dt@kernel.org
Cc: matthias.bgg@gmail.com
---
 Documentation/devicetree/bindings/arm/mediatek.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index f04277873694..301f9a1e041c 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -431,6 +431,7 @@ properties:
           - const: mediatek,mt8365
       - items:
           - enum:
+              - ezurio,mt8370-tungsten-smarc
               - grinn,genio-510-sbc
               - mediatek,mt8370-evk
           - const: mediatek,mt8370
-- 
2.43.0

[PATCH 3/5] dt-bindings: arm: mediatek: Add ezurio,mt8390-tungsten-smarc

[Gary Bisson]

Add device tree bindings support for the Ezurio Tungsten 700 (MT8390)
SMARC SOM [1] + Universal SMARC carrier board [2].

[1] https://www.ezurio.com/product/tungsten700-smarc
[2]
https://www.ezurio.com/system-on-module/accessories/universal-smarc-carrier

Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
---
Cc: robh@kernel.org
Cc: krzk+dt@kernel.org
Cc: conor+dt@kernel.org
Cc: matthias.bgg@gmail.com
---
 Documentation/devicetree/bindings/arm/mediatek.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 301f9a1e041c..cffb0f6ac690 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -438,6 +438,7 @@ properties:
           - const: mediatek,mt8188
       - items:
           - enum:
+              - ezurio,mt8390-tungsten-smarc
               - grinn,genio-700-sbc
               - mediatek,mt8390-evk
           - const: mediatek,mt8390
-- 
2.43.0

[PATCH 4/5] arm64: dts: mediatek: add device tree for Tungsten 510 board

[Gary Bisson]

Add device tree to support Ezurio Tungsten 510 (MT8370) SMARC SOM [1] +
Universal SMARC carrier board [2].
It includes support for the MIPI-DSI BD070LIC3 display which uses the
Tianma TM070JDHG30 panel + TI SN65DSI84 MIPI-DSI to LVDS bridge [3].

[1] https://www.ezurio.com/product/tungsten510-smarc
[2]
https://www.ezurio.com/system-on-module/accessories/universal-smarc-carrier
[3] https://www.ezurio.com/product/bd070lic3-7-touchscreen-display

Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
---
Cc: angelogioacchino.delregno@collabora.com
Cc: robh@kernel.org
Cc: krzk+dt@kernel.org
Cc: conor+dt@kernel.org
Cc: matthias.bgg@gmail.com
---
 arch/arm64/boot/dts/mediatek/Makefile         |    1 +
 .../dts/mediatek/mt8370-tungsten-smarc.dts    |   14 +
 .../dts/mediatek/mt83x0-tungsten-smarc.dtsi   | 1481 +++++++++++++++++
 3 files changed, 1496 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8370-tungsten-smarc.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt83x0-tungsten-smarc.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index a4df4c21399e..30d169a31b10 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -99,6 +99,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-genio-510-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-tungsten-smarc.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-kontron-3-5-sbc-i1200.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8370-tungsten-smarc.dts b/arch/arm64/boot/dts/mediatek/mt8370-tungsten-smarc.dts
new file mode 100644
index 000000000000..d713ef77df3a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8370-tungsten-smarc.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Ezurio LLC
+ * Author: Gary Bisson <bisson.gary@gmail.com>
+ */
+/dts-v1/;
+#include "mt8370.dtsi"
+#include "mt83x0-tungsten-smarc.dtsi"
+
+/ {
+	model = "Ezurio Tungsten510 SMARC (MT8370)";
+	compatible = "ezurio,mt8370-tungsten-smarc", "mediatek,mt8370",
+		     "mediatek,mt8188";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt83x0-tungsten-smarc.dtsi b/arch/arm64/boot/dts/mediatek/mt83x0-tungsten-smarc.dtsi
new file mode 100644
index 000000000000..acdafd4936fe
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt83x0-tungsten-smarc.dtsi
@@ -0,0 +1,1481 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Ezurio LLC
+ * Author: Gary Bisson <bisson.gary@gmail.com>
+ */
+
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/net/microchip-lan78xx.h>
+#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	aliases {
+		dsi0 = &disp_dsi0;
+		ethernet0 = &eth;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		rtc0 = &rv3028;
+		rtc1 = &mt6359rtc;
+		serial0 = &uart0;
+	};
+
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <768>;
+		num-interpolated-steps = <1023>;
+		enable-gpios = <&pio 30 GPIO_ACTIVE_HIGH>;
+		pwms = <&disp_pwm0 0 30000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x1 0x00000000>;
+	};
+
+	panel-dsi0 {
+		compatible = "tianma,tm070jdhg30";
+		backlight = <&backlight_lcd0>;
+
+		port {
+			dsi0_panel_in: endpoint {
+				remote-endpoint = <&sn65dsi84_bridge_out>;
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		apu_mem: memory@55000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x55000000 0 0x1400000>; /* 20 MB */
+		};
+
+		vpu_mem: memory@57000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x57000000 0 0x1400000>; /* 20 MB */
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	regulator-efuse {
+		compatible = "regulator-output";
+		vout-supply = <&mt6359_vefuse_ldo_reg>;
+	};
+
+	sdcard_en_3v3: regulator-sdcard-en {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "sdcard_en_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 111 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_p0_vbus: regulator-usb-p0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_p0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 84 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_p1_vbus: regulator-usb-p1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_hub_pins>;
+		regulator-name = "vbus_p1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 147 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_p2_vbus: regulator-usb-p2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_eth_pins>;
+		regulator-name = "vbus_p2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 80 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pins>;
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&pio 89 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu2 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu3 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu6 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu7 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&disp_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pins>;
+	status = "okay";
+};
+
+&disp_dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				remote-endpoint = <&sn65dsi84_bridge_in>;
+			};
+		};
+	};
+};
+
+&dither0_in {
+	remote-endpoint = <&postmask0_out>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&eth {
+	phy-mode ="rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,mac-wol;
+	snps,reset-gpio = <&pio 27 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 11000 1000>;
+	status = "okay";
+};
+
+&eth_mdio {
+	ethernet_phy0: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x7>;
+		interrupts-extended = <&pio 148 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gamma0_out {
+	remote-endpoint = <&postmask0_in>;
+};
+
+&gpu {
+	mali-supply = <&mt6359_vproc2_buck_reg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-1 = <&i2c0_gpio_pins>;
+	scl-gpios = <&pio 55 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&pio 56 GPIO_OPEN_DRAIN>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-mux-gp@73 {
+		compatible = "nxp,pca9546";
+		reg = <0x73>;
+		reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c_mux_gp_0: i2cmux-gp@0 {
+			clock-frequency = <100000>;
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c_mux_gp_1: i2cmux-gp@1 {
+			clock-frequency = <100000>;
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c_mux_gp_2: i2cmux-gp@2 {
+			clock-frequency = <100000>;
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c_mux_gp_3: i2cmux-gp@3 {
+			clock-frequency = <100000>;
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	i2c-mux-lcd@73 {
+		compatible = "nxp,pca9546";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_mux_smarc_lcd_pins>;
+		reg = <0x73>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c_mux_lcd_0: i2cmux-lcd@0 {
+			clock-frequency = <100000>;
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c_mux_lcd_1: i2cmux-lcd@1 {
+			clock-frequency = <100000>;
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c_mux_lcd_2: i2cmux-lcd@2 {
+			clock-frequency = <100000>;
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c_mux_lcd_3: i2cmux-lcd@3 {
+			clock-frequency = <100000>;
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default", "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c_mux_gp_0 {
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		interrupts-extended = <&pio 42 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rv3028_pins>;
+		#clock-cells = <0>;
+		wakeup-source;
+	};
+};
+
+&i2c_mux_gp_1 {
+	typec@60 {
+		compatible = "ti,hd3ss3220";
+		interrupts-extended = <&pio 45 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hd3ss3220_pins>;
+		reg = <0x60>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&i2c_mux_gp_2 {
+	codec@1a {
+		#sound-dai-cells = <0>;
+		clocks = <&topckgen CLK_TOP_I2SO1>;
+		compatible = "wlf,wm8962";
+		gpio-cfg = <
+			0x0000 /* n/c */
+			0x0000 /* gpio2: */
+			0x0000 /* gpio3: */
+			0x0000 /* n/c */
+			0x8081 /* gpio5:HP detect */
+			0x8095 /* gpio6:Mic detect */
+		>;
+		reg = <0x1a>;
+	};
+};
+
+&i2c_mux_lcd_2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bridge@2c {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2c>;
+		enable-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsi0_sn65dsi84_pins>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sn65dsi84_bridge_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+					data-lanes = <1 2 3 4>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				sn65dsi84_bridge_out: endpoint {
+					remote-endpoint = <&dsi0_panel_in>;
+				};
+			};
+		};
+	};
+
+	touchscren@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_dsi0_goodix_pins>;
+		interrupts-extended = <&pio 146 IRQ_TYPE_LEVEL_HIGH>;
+		irq-gpios = <&pio 146 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6359_vproc2_buck_reg>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x1481b>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>;
+	vqmmc-supply = <&mt6359_vsim1_ldo_reg>;
+	vmmc-supply = <&sdcard_en_3v3>;
+};
+
+&mmc2 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs", "state_eint";
+	pinctrl-0 = <&mmc2_default_pins>;
+	pinctrl-1 = <&mmc2_uhs_pins>;
+	pinctrl-2 = <&mmc2_eint_pins>;
+	eint-gpios = <&pio 172 0>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	cap-sdio-async-int;
+	cap-sdio-irq;
+	no-mmc;
+	no-sd;
+	non-removable;
+	vmmc-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+	vqmmc-supply = <&mt6359_vcn18_ldo_reg>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+};
+
+&mipi_tx_config0 {
+	status = "okay";
+};
+
+&mt6359codec {
+	mediatek,mic-type-0 = <1>;
+	mediatek,mic-type-1 = <3>;
+	mediatek,mic-type-2 = <0>;
+	mediatek,dmic-mode = <0>;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn18_ldo_reg {
+	regulator-name = "vcn18_pmu";
+	regulator-always-on;
+	regulator-boot-on;
+};
+
+&mt6359_vcn33_1_bt_ldo_reg {
+	regulator-name = "vcn33_1_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-name = "vcn33_2_pmu";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+	regulator-boot-on;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-name = "dvdd_proc_l";
+	regulator-always-on;
+};
+
+&mt6359_vemc_1_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-name = "dvdd_core";
+	regulator-always-on;
+};
+
+&mt6359_vmodem_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpa_buck_reg {
+	regulator-name = "vpa_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vproc2_buck_reg {
+	/* The name "vgpu" is required by mtk-regulator-coupler */
+	regulator-name = "vgpu";
+	regulator-min-microvolt = <550000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
+	regulator-coupled-max-spread = <225000>;
+	regulator-always-on;
+};
+
+&mt6359_vs2_buck_reg {
+	regulator-min-microvolt = <1600000>;
+	regulator-boot-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-name = "dvdd_adsp";
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-name = "va12_abb2_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	/* The name "vsram_gpu" is required by mtk-regulator-coupler */
+	regulator-name = "vsram_gpu";
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
+	regulator-coupled-max-spread = <225000>;
+	regulator-always-on;
+};
+
+&mt6359_vsim1_ldo_reg {
+	regulator-name = "vsim1_pmu";
+	regulator-max-microvolt = <1800000>;
+	regulator-enable-ramp-delay = <480>;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-name = "vufs18_pmu";
+	regulator-always-on;
+};
+
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default_pins>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pmic {
+	interrupt-parent = <&pio>;
+	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6359keys: keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <116>;
+			wakeup-source;
+		};
+	};
+};
+
+&postmask0_in {
+	remote-endpoint = <&gamma0_out>;
+};
+
+&postmask0_out {
+	remote-endpoint = <&dither0_in>;
+};
+
+&scp_cluster {
+	status = "okay";
+};
+
+&scp_c0 {
+	firmware-name = "mediatek/mt8188/scp.img";
+	memory-region = <&scp_mem>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spmi {
+	#address-cells = <1>;
+	#size-cells = <2>;
+
+	mt6315_6: mt6315@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 0 0xb>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "vbuck1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+				mtk,combined-regulator = <2>;
+			};
+
+			mt6315_6_vbuck3: vbuck3 {
+				regulator-compatible = "vbuck3";
+				regulator-name = "vbuck3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+
+			mt6315_6_vbuck4: vbuck4 {
+				regulator-compatible = "vbuck4";
+				regulator-name = "vbuck4";
+				regulator-min-microvolt = <1193750>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1193750>;
+				};
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ssusb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbotg_pins>;
+	maximum-speed = "high-speed";
+	usb-role-switch;
+	dr_mode = "otg";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	wakeup-source;
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				hs_ep: endpoint {
+					remote-endpoint = <&usb_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			usb_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			usb_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&u2port0 {
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&xhci0 {
+	vbus-supply = <&usb_p0_vbus>;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	dr_mode = "host";
+	wakeup-source;
+	status = "okay";
+};
+
+&u2port1 {
+	status = "okay";
+};
+
+&u3port1 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&xhci1 {
+	vbus-supply = <&usb_p1_vbus>;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb2 {
+	maximum-speed = "high-speed";
+	dr_mode = "host";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+	wakeup-source;
+};
+
+&u2port2 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&xhci2 {
+	vbus-supply = <&usb_p2_vbus>;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet@1 {
+		compatible = "usb424,7850";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-phy@1 {
+				reg = <1>;
+				microchip,led-modes = <
+					LAN78XX_LINK_1000_ACTIVITY
+					LAN78XX_LINK_10_ACTIVITY
+					LAN78XX_LINK_10_100_ACTIVITY
+					LAN78XX_LINK_ACTIVITY
+				>;
+			};
+		};
+	};
+};
+
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+};
+
+&pio {
+	audio_pins: audio-pins {
+		pins-aud-pmic {
+			pinmux = <
+				PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI
+				PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI
+				PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0
+				PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1
+				PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0
+				PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1
+			>;
+		};
+
+		pins-pcm-wifi {
+			pinmux = <
+				PINMUX_GPIO121__FUNC_B0_PCM_CLK
+				PINMUX_GPIO122__FUNC_B0_PCM_SYNC
+				PINMUX_GPIO123__FUNC_O_PCM_DO
+				PINMUX_GPIO124__FUNC_I0_PCM_DI
+			>;
+		};
+
+		pins-i2s {
+			pinmux = <
+				PINMUX_GPIO119__FUNC_O_I2SO1_MCK
+				PINMUX_GPIO112__FUNC_O_I2SO1_WS
+				PINMUX_GPIO120__FUNC_O_I2SO1_BCK
+				PINMUX_GPIO113__FUNC_O_I2SO1_D0
+				PINMUX_GPIO110__FUNC_I0_I2SIN_D0
+			>;
+		};
+	};
+
+	disp_pwm0_pins: disp-pwm0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO29__FUNC_O_DISP_PWM0>;
+			bias-pull-down;
+		};
+	};
+
+	dsi0_sn65dsi84_pins: dsi0-sn65dsi84-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO128__FUNC_B_GPIO128>;
+			bias-pull-down;
+			input-enable;
+		};
+
+		pins-enable {
+			pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>;
+			bias-pull-down;
+		};
+	};
+
+	eth_default_pins: eth-default-pins {
+		pins-txd {
+			pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>,
+				 <PINMUX_GPIO132__FUNC_O_GBE_TXD2>,
+				 <PINMUX_GPIO133__FUNC_O_GBE_TXD1>,
+				 <PINMUX_GPIO134__FUNC_O_GBE_TXD0>;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+		pins-cc {
+			pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>,
+				 <PINMUX_GPIO142__FUNC_O_GBE_TXEN>,
+				 <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+		pins-rxd {
+			pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>,
+				 <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>,
+				 <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>,
+				 <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>,
+				 <PINMUX_GPIO140__FUNC_I0_GBE_RXC>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+		pins-mdio {
+			pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>,
+				 <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			input-enable;
+		};
+		pins-power {
+			pinmux = <PINMUX_GPIO27__FUNC_B_GPIO27>; /* GP_EQOS_RESET */
+			output-high;
+		};
+		pins-intr {
+			pinmux = <PINMUX_GPIO148__FUNC_B_GPIO148>; /* GPIRQ_EQOS_PHY */
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+			input-enable;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-txd {
+			pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>,
+				 <PINMUX_GPIO132__FUNC_B_GPIO132>,
+				 <PINMUX_GPIO133__FUNC_B_GPIO133>,
+				 <PINMUX_GPIO134__FUNC_B_GPIO134>;
+		};
+		pins-cc {
+			pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>,
+				 <PINMUX_GPIO142__FUNC_B_GPIO142>,
+				 <PINMUX_GPIO141__FUNC_B_GPIO141>,
+				 <PINMUX_GPIO140__FUNC_B_GPIO140>;
+		};
+		pins-rxd {
+			pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>,
+				 <PINMUX_GPIO136__FUNC_B_GPIO136>,
+				 <PINMUX_GPIO137__FUNC_B_GPIO137>,
+				 <PINMUX_GPIO138__FUNC_B_GPIO138>;
+		};
+		pins-mdio {
+			pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>,
+				 <PINMUX_GPIO144__FUNC_B_GPIO144>;
+			input-disable;
+			bias-disable;
+		};
+	};
+
+	gpio_keys_pins: gpio-keys-pins {
+		pins-keys {
+			pinmux = <PINMUX_GPIO129__FUNC_B_GPIO129>,
+				 <PINMUX_GPIO65__FUNC_B_GPIO65>,
+				 <PINMUX_GPIO66__FUNC_B_GPIO66>;
+			bias-pull-up;
+		};
+	};
+
+	hd3ss3220_pins: hd3ss3320-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			input-enable;
+		};
+	};
+
+	hdmi_vreg_pins: hdmi-vreg-pins {
+		pins-pwr {
+			pinmux = <PINMUX_GPIO50__FUNC_O_HDMITX20_PWR5V>;
+			bias-disable;
+		};
+	};
+
+	hdmi_pins: hdmi-pins {
+		pins-hotplug {
+			pinmux = <PINMUX_GPIO51__FUNC_I0_HDMITX20_HTPLG>;
+			bias-pull-down;
+		};
+
+		pins-cec {
+			pinmux = <PINMUX_GPIO52__FUNC_B1_HDMITX20_CEC>;
+			bias-disable;
+		};
+
+		pins-ddc {
+			pinmux = <PINMUX_GPIO53__FUNC_B1_HDMITX20_SCL>,
+				 <PINMUX_GPIO54__FUNC_B1_HDMITX20_SDA>;
+			drive-strength = <10>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c0_gpio_pins: i2c0-gpio-pins {
+		pins-gpio {
+			pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c_mux_smarc_lcd_pins: i2c-mux-smarc-lcd-pins {
+		pins-reset {
+			pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>;
+			bias-pull-down;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
+				 <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
+				 <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
+				 <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
+				 <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-pwr {
+			pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>;
+			bias-pull-down;
+		};
+
+		pins-pullup {
+			pinmux = <PINMUX_GPIO11__FUNC_B_GPIO11>;
+			bias-pull-up;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-insert {
+			pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
+				 <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
+				 <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
+				 <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
+				 <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc2_default_pins: mmc2-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
+				 <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
+				 <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
+				 <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
+				 <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc2_uhs_pins: mmc2-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
+				 <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
+				 <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
+				 <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
+				 <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc2_eint_pins: mmc2-eint-pins {
+		pins-dat1 {
+			pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	rv3028_pins: rv3028-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO42__FUNC_B_GPIO42>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			input-enable;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				<PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				<PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				<PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				<PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				<PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				<PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	pcie_default_pins: pcie-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
+				 <PINMUX_GPIO48__FUNC_O_PERSTN>,
+				 <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	ts_dsi0_goodix_pins: ts-dsi0-goodix-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO146__FUNC_B_GPIO146>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			input-enable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO7__FUNC_B_GPIO7>;
+			bias-pull-down;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>,
+				 <PINMUX_GPIO34__FUNC_I1_URXD1>;
+			bias-pull-up;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>,
+				 <PINMUX_GPIO36__FUNC_I1_URXD2>;
+			bias-pull-up;
+		};
+	};
+
+	usbotg_pins: usbotg-pins {
+		pins-iddig {
+			pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-valid {
+			pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>;
+			input-enable;
+		};
+
+		pins-vbus {
+			pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>;
+			output-high;
+		};
+	};
+
+	usb1_hub_pins: usb1-hub-pins {
+		pins {
+			pinmux = <PINMUX_GPIO147__FUNC_B_GPIO147>;
+			output-low;
+		};
+	};
+
+	usb1_pins: usb1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>;
+			input-enable;
+		};
+	};
+
+	usb2_eth_pins: usb2-eth-pins {
+		pins {
+			pinmux = <PINMUX_GPIO80__FUNC_B_GPIO80>;
+			output-low;
+		};
+	};
+
+	wifi_pwrseq_pins: wifi-pwrseq-pins {
+		pins {
+			pinmux = <PINMUX_GPIO89__FUNC_B_GPIO89>;
+			output-low;
+		};
+	};
+
+	watchdog_pins: watchdog-pins {
+		pins {
+			pinmux = <PINMUX_GPIO100__FUNC_O_WATCHDOG>;
+			bias-pull-up;
+		};
+	};
+};
-- 
2.43.0

[PATCH 5/5] arm64: dts: mediatek: add device tree for Tungsten 700 board

[Gary Bisson]

Add device tree to support Ezurio Tungsten 700 (MT8390) SMARC SOM [1] +
Universal SMARC carrier board [2].
It includes support for the MIPI-DSI BD070LIC3 display which uses the
Tianma TM070JDHG30 panel + TI SN65DSI84 MIPI-DSI to LVDS bridge [3].

[1] https://www.ezurio.com/product/tungsten700-smarc
[2]
https://www.ezurio.com/system-on-module/accessories/universal-smarc-carrier
[3] https://www.ezurio.com/product/bd070lic3-7-touchscreen-display

Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
---
Cc: angelogioacchino.delregno@collabora.com
Cc: robh@kernel.org
Cc: krzk+dt@kernel.org
Cc: conor+dt@kernel.org
Cc: matthias.bgg@gmail.com
---
 arch/arm64/boot/dts/mediatek/Makefile         |  1 +
 .../dts/mediatek/mt8390-tungsten-smarc.dts    | 22 +++++++++++++++++++
 2 files changed, 23 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8390-tungsten-smarc.dts

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 30d169a31b10..85f338344dd3 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-genio-510-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-tungsten-smarc.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-tungsten-smarc.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-kontron-3-5-sbc-i1200.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l-8-hd-panel.dtbo
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-tungsten-smarc.dts b/arch/arm64/boot/dts/mediatek/mt8390-tungsten-smarc.dts
new file mode 100644
index 000000000000..f1cf2821107f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8390-tungsten-smarc.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Ezurio LLC
+ * Author: Gary Bisson <bisson.gary@gmail.com>
+ */
+/dts-v1/;
+#include "mt8188.dtsi"
+#include "mt83x0-tungsten-smarc.dtsi"
+
+/ {
+	model = "Ezurio Tungsten700 SMARC (MT8390)";
+	compatible = "ezurio,mt8390-tungsten-smarc", "mediatek,mt8390",
+		     "mediatek,mt8188";
+};
+
+&cpu4 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu5 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
-- 
2.43.0

Re: [PATCH 1/5] dt-bindings: vendor-prefixes: Add Ezurio LLC

[Krzysztof Kozlowski]

On 01/12/2025 09:41, Gary Bisson wrote:
> Ezurio is the new name of Laird Connectivity after it acquired Boundary
> Devices.
> 
> Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
> ---
> Cc: robh@kernel.org
> Cc: krzk+dt@kernel.org

Why only two of us? Please don't work on old kernels, some ancient code.

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC (and consider --no-git-fallback argument, so you will
not CC people just because they made one commit years ago). It might
happen, that command when run on an older kernel, gives you outdated
entries. Therefore please be sure you base your patches on recent Linux
kernel.

Tools like b4 or scripts/get_maintainer.pl provide you proper list of
people, so fix your workflow. Tools might also fail if you work on some
ancient tree (don't, instead use mainline) or work on fork of kernel
(don't, instead use mainline). Just use b4 and everything should be
fine, although remember about `b4 prep --auto-to-cc` if you added new
patches to the patchset.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>



Best regards,
Krzysztof

Re: [PATCH 2/5] dt-bindings: arm: mediatek: Add ezurio,mt8370-tungsten-smarc

[Krzysztof Kozlowski]

On 01/12/2025 09:41, Gary Bisson wrote:
> Add device tree bindings support for the Ezurio Tungsten 510 (MT8370)
> SMARC SOM [1] + Universal SMARC carrier board [2].
> 
> [1] https://www.ezurio.com/product/tungsten510-smarc
> [2]

Don't wrap lines

> https://www.ezurio.com/system-on-module/accessories/universal-smarc-carrier
> 
> Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
> ---
> Cc: robh@kernel.org
> Cc: krzk+dt@kernel.org
> Cc: conor+dt@kernel.org

And here Conor? Just use b4.

Anyway, please squash this and 3/5, it's just churn if boards are
per-commit.


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

Re: [PATCH 4/5] arm64: dts: mediatek: add device tree for Tungsten 510 board

[Krzysztof Kozlowski]

On 01/12/2025 09:41, Gary Bisson wrote:
> +
> +&i2c_mux_lcd_2 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	bridge@2c {
> +		compatible = "ti,sn65dsi84";
> +		reg = <0x2c>;
> +		enable-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&dsi0_sn65dsi84_pins>;
> +		status = "okay";

Did you disable it anywhere?


...


> +
> +&spmi {
> +	#address-cells = <1>;
> +	#size-cells = <2>;
> +
> +	mt6315_6: mt6315@6 {

Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
If you cannot find a name matching your device, please check in kernel
sources for similar cases or you can grow the spec (via pull request to
DT spec repo).

e.g. pmic

> +		compatible = "mediatek,mt6315-regulator";
> +		reg = <0x6 0 0xb>;



Best regards,
Krzysztof

Re: [PATCH 1/5] dt-bindings: vendor-prefixes: Add Ezurio LLC

[Gary Bisson]

Hi,

On Mon, Dec 01, 2025 at 09:50:07AM +0100, Krzysztof Kozlowski wrote:
> On 01/12/2025 09:41, Gary Bisson wrote:
> > Ezurio is the new name of Laird Connectivity after it acquired Boundary
> > Devices.
> > 
> > Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
> > ---
> > Cc: robh@kernel.org
> > Cc: krzk+dt@kernel.org
> 
> Why only two of us? Please don't work on old kernels, some ancient code.
> 
> Please use scripts/get_maintainers.pl to get a list of necessary people
> and lists to CC (and consider --no-git-fallback argument, so you will
> not CC people just because they made one commit years ago). It might
> happen, that command when run on an older kernel, gives you outdated
> entries. Therefore please be sure you base your patches on recent Linux
> kernel.

Actually I'm using master so the get_maintainer.pl output is fine, just
wasn't using b4 and addding the CC myself, will resend with b4 and will
update the patches per your review.

> Tools like b4 or scripts/get_maintainer.pl provide you proper list of
> people, so fix your workflow. Tools might also fail if you work on some
> ancient tree (don't, instead use mainline) or work on fork of kernel
> (don't, instead use mainline). Just use b4 and everything should be
> fine, although remember about `b4 prep --auto-to-cc` if you added new
> patches to the patchset.
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Thanks for the quick review of the series.

Regards,
Gary

Re: [PATCH 1/5] dt-bindings: vendor-prefixes: Add Ezurio LLC

[Rob Herring (Arm)]

On Mon, 01 Dec 2025 09:41:36 +0100, Gary Bisson wrote:
> Ezurio is the new name of Laird Connectivity after it acquired Boundary
> Devices.
> 
> Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
> ---
> Cc: robh@kernel.org
> Cc: krzk+dt@kernel.org
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Traceback (most recent call last):
  File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 428, in get_or_retrieve
    resource = registry._retrieve(uri)
  File "/usr/local/lib/python3.13/dist-packages/dtschema/validator.py", line 426, in retrieve
    return DRAFT201909.create_resource(self.schemas[uri])
                                       ~~~~~~~~~~~~^^^^^
KeyError: 'http://devicetree.org/schemas/thermal/qcom-tsens.yaml'

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 682, in lookup
    retrieved = self._registry.get_or_retrieve(uri)
  File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 435, in get_or_retrieve
    raise exceptions.Unretrievable(ref=uri) from error
referencing.exceptions.Unretrievable: 'http://devicetree.org/schemas/thermal/qcom-tsens.yaml'

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 463, in _validate_reference
    resolved = self._resolver.lookup(ref)
  File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 686, in lookup
    raise exceptions.Unresolvable(ref=ref) from error
referencing.exceptions.Unresolvable: /schemas/thermal/qcom-tsens.yaml#

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/usr/local/bin/dt-validate", line 8, in <module>
    sys.exit(main())
             ~~~~^^
  File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 158, in main
    sg.check_dtb(filename)
    ~~~~~~~~~~~~^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 95, in check_dtb
    self.check_subtree(dt, subtree, False, "/", "/", filename)
    ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 88, in check_subtree
    self.check_subtree(tree, value, disabled, name, fullname + name, filename)
    ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 88, in check_subtree
    self.check_subtree(tree, value, disabled, name, fullname + name, filename)
    ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 83, in check_subtree
    self.check_node(tree, subtree, disabled, nodename, fullname, filename)
    ~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 34, in check_node
    for error in self.validator.iter_errors(node, filter=match_schema_file,
                 ~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                                            compatible_match=compatible_match):
                                            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/dtschema/validator.py", line 448, in iter_errors
    for error in self.DtValidator(schema, registry=self.registry).iter_errors(instance):
                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 384, in iter_errors
    for error in errors:
                 ^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/jsonschema/_keywords.py", line 296, in properties
    yield from validator.descend(
    ...<4 lines>...
    )
  File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 432, in descend
    for error in errors:
                 ^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/jsonschema/_keywords.py", line 275, in ref
    yield from validator._validate_reference(ref=ref, instance=instance)
               ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 465, in _validate_reference
    raise exceptions._WrappedReferencingError(err) from err
jsonschema.exceptions._WrappedReferencingError: Unresolvable: /schemas/thermal/qcom-tsens.yaml#
Traceback (most recent call last):
  File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 428, in get_or_retrieve
    resource = registry._retrieve(uri)
  File "/usr/local/lib/python3.13/dist-packages/dtschema/validator.py", line 426, in retrieve
    return DRAFT201909.create_resource(self.schemas[uri])
                                       ~~~~~~~~~~~~^^^^^
KeyError: 'http://devicetree.org/schemas/thermal/qcom-tsens.yaml'

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 682, in lookup
    retrieved = self._registry.get_or_retrieve(uri)
  File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 435, in get_or_retrieve
    raise exceptions.Unretrievable(ref=uri) from error
referencing.exceptions.Unretrievable: 'http://devicetree.org/schemas/thermal/qcom-tsens.yaml'

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 463, in _validate_reference
    resolved = self._resolver.lookup(ref)
  File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 686, in lookup
    raise exceptions.Unresolvable(ref=ref) from error
referencing.exceptions.Unresolvable: /schemas/thermal/qcom-tsens.yaml#

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/usr/local/bin/dt-validate", line 8, in <module>
    sys.exit(main())
             ~~~~^^
  File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 158, in main
    sg.check_dtb(filename)
    ~~~~~~~~~~~~^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 95, in check_dtb
    self.check_subtree(dt, subtree, False, "/", "/", filename)
    ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 88, in check_subtree
    self.check_subtree(tree, value, disabled, name, fullname + name, filename)
    ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 88, in check_subtree
    self.check_subtree(tree, value, disabled, name, fullname + name, filename)
    ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 83, in check_subtree
    self.check_node(tree, subtree, disabled, nodename, fullname, filename)
    ~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 34, in check_node
    for error in self.validator.iter_errors(node, filter=match_schema_file,
                 ~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                                            compatible_match=compatible_match):
                                            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/dtschema/validator.py", line 448, in iter_errors
    for error in self.DtValidator(schema, registry=self.registry).iter_errors(instance):
                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 384, in iter_errors
    for error in errors:
                 ^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/jsonschema/_keywords.py", line 296, in properties
    yield from validator.descend(
    ...<4 lines>...
    )
  File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 432, in descend
    for error in errors:
                 ^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/jsonschema/_keywords.py", line 334, in allOf
    yield from validator.descend(instance, subschema, schema_path=index)
  File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 432, in descend
    for error in errors:
                 ^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/jsonschema/_keywords.py", line 275, in ref
    yield from validator._validate_reference(ref=ref, instance=instance)
               ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 465, in _validate_reference
    raise exceptions._WrappedReferencingError(err) from err
jsonschema.exceptions._WrappedReferencingError: Unresolvable: /schemas/thermal/qcom-tsens.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251201084140.376058-2-bisson.gary@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH 2/5] dt-bindings: arm: mediatek: Add ezurio,mt8370-tungsten-smarc

[Rob Herring (Arm)]

On Mon, 01 Dec 2025 09:41:37 +0100, Gary Bisson wrote:
> Add device tree bindings support for the Ezurio Tungsten 510 (MT8370)
> SMARC SOM [1] + Universal SMARC carrier board [2].
> 
> [1] https://www.ezurio.com/product/tungsten510-smarc
> [2]
> https://www.ezurio.com/system-on-module/accessories/universal-smarc-carrier
> 
> Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
> ---
> Cc: robh@kernel.org
> Cc: krzk+dt@kernel.org
> Cc: conor+dt@kernel.org
> Cc: matthias.bgg@gmail.com
> ---
>  Documentation/devicetree/bindings/arm/mediatek.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251201084140.376058-3-bisson.gary@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH 3/5] dt-bindings: arm: mediatek: Add ezurio,mt8390-tungsten-smarc

[Rob Herring (Arm)]

On Mon, 01 Dec 2025 09:41:38 +0100, Gary Bisson wrote:
> Add device tree bindings support for the Ezurio Tungsten 700 (MT8390)
> SMARC SOM [1] + Universal SMARC carrier board [2].
> 
> [1] https://www.ezurio.com/product/tungsten700-smarc
> [2]
> https://www.ezurio.com/system-on-module/accessories/universal-smarc-carrier
> 
> Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
> ---
> Cc: robh@kernel.org
> Cc: krzk+dt@kernel.org
> Cc: conor+dt@kernel.org
> Cc: matthias.bgg@gmail.com
> ---
>  Documentation/devicetree/bindings/arm/mediatek.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251201084140.376058-4-bisson.gary@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH 1/5] dt-bindings: vendor-prefixes: Add Ezurio LLC

[Gary Bisson]

Hi,

On Mon, Dec 01, 2025 at 03:33:40AM -0600, Rob Herring (Arm) wrote:
> 
> On Mon, 01 Dec 2025 09:41:36 +0100, Gary Bisson wrote:
> > Ezurio is the new name of Laird Connectivity after it acquired Boundary
> > Devices.
> > 
> > Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
> > ---
> > Cc: robh@kernel.org
> > Cc: krzk+dt@kernel.org
> > ---
> >  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Traceback (most recent call last):
>   File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 428, in get_or_retrieve
>     resource = registry._retrieve(uri)
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/validator.py", line 426, in retrieve
>     return DRAFT201909.create_resource(self.schemas[uri])
>                                        ~~~~~~~~~~~~^^^^^
> KeyError: 'http://devicetree.org/schemas/thermal/qcom-tsens.yaml'
> 
> The above exception was the direct cause of the following exception:
> 
> Traceback (most recent call last):
>   File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 682, in lookup
>     retrieved = self._registry.get_or_retrieve(uri)
>   File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 435, in get_or_retrieve
>     raise exceptions.Unretrievable(ref=uri) from error
> referencing.exceptions.Unretrievable: 'http://devicetree.org/schemas/thermal/qcom-tsens.yaml'
> 
> The above exception was the direct cause of the following exception:
> 
> Traceback (most recent call last):
>   File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 463, in _validate_reference
>     resolved = self._resolver.lookup(ref)
>   File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 686, in lookup
>     raise exceptions.Unresolvable(ref=ref) from error
> referencing.exceptions.Unresolvable: /schemas/thermal/qcom-tsens.yaml#
> 
> The above exception was the direct cause of the following exception:
> 
> Traceback (most recent call last):
>   File "/usr/local/bin/dt-validate", line 8, in <module>
>     sys.exit(main())
>              ~~~~^^
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 158, in main
>     sg.check_dtb(filename)
>     ~~~~~~~~~~~~^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 95, in check_dtb
>     self.check_subtree(dt, subtree, False, "/", "/", filename)
>     ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 88, in check_subtree
>     self.check_subtree(tree, value, disabled, name, fullname + name, filename)
>     ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 88, in check_subtree
>     self.check_subtree(tree, value, disabled, name, fullname + name, filename)
>     ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 83, in check_subtree
>     self.check_node(tree, subtree, disabled, nodename, fullname, filename)
>     ~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 34, in check_node
>     for error in self.validator.iter_errors(node, filter=match_schema_file,
>                  ~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>                                             compatible_match=compatible_match):
>                                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/validator.py", line 448, in iter_errors
>     for error in self.DtValidator(schema, registry=self.registry).iter_errors(instance):
>                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 384, in iter_errors
>     for error in errors:
>                  ^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/jsonschema/_keywords.py", line 296, in properties
>     yield from validator.descend(
>     ...<4 lines>...
>     )
>   File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 432, in descend
>     for error in errors:
>                  ^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/jsonschema/_keywords.py", line 275, in ref
>     yield from validator._validate_reference(ref=ref, instance=instance)
>                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 465, in _validate_reference
>     raise exceptions._WrappedReferencingError(err) from err
> jsonschema.exceptions._WrappedReferencingError: Unresolvable: /schemas/thermal/qcom-tsens.yaml#
> Traceback (most recent call last):
>   File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 428, in get_or_retrieve
>     resource = registry._retrieve(uri)
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/validator.py", line 426, in retrieve
>     return DRAFT201909.create_resource(self.schemas[uri])
>                                        ~~~~~~~~~~~~^^^^^
> KeyError: 'http://devicetree.org/schemas/thermal/qcom-tsens.yaml'
> 
> The above exception was the direct cause of the following exception:
> 
> Traceback (most recent call last):
>   File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 682, in lookup
>     retrieved = self._registry.get_or_retrieve(uri)
>   File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 435, in get_or_retrieve
>     raise exceptions.Unretrievable(ref=uri) from error
> referencing.exceptions.Unretrievable: 'http://devicetree.org/schemas/thermal/qcom-tsens.yaml'
> 
> The above exception was the direct cause of the following exception:
> 
> Traceback (most recent call last):
>   File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 463, in _validate_reference
>     resolved = self._resolver.lookup(ref)
>   File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 686, in lookup
>     raise exceptions.Unresolvable(ref=ref) from error
> referencing.exceptions.Unresolvable: /schemas/thermal/qcom-tsens.yaml#
> 
> The above exception was the direct cause of the following exception:
> 
> Traceback (most recent call last):
>   File "/usr/local/bin/dt-validate", line 8, in <module>
>     sys.exit(main())
>              ~~~~^^
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 158, in main
>     sg.check_dtb(filename)
>     ~~~~~~~~~~~~^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 95, in check_dtb
>     self.check_subtree(dt, subtree, False, "/", "/", filename)
>     ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 88, in check_subtree
>     self.check_subtree(tree, value, disabled, name, fullname + name, filename)
>     ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 88, in check_subtree
>     self.check_subtree(tree, value, disabled, name, fullname + name, filename)
>     ~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 83, in check_subtree
>     self.check_node(tree, subtree, disabled, nodename, fullname, filename)
>     ~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 34, in check_node
>     for error in self.validator.iter_errors(node, filter=match_schema_file,
>                  ~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>                                             compatible_match=compatible_match):
>                                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/dtschema/validator.py", line 448, in iter_errors
>     for error in self.DtValidator(schema, registry=self.registry).iter_errors(instance):
>                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 384, in iter_errors
>     for error in errors:
>                  ^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/jsonschema/_keywords.py", line 296, in properties
>     yield from validator.descend(
>     ...<4 lines>...
>     )
>   File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 432, in descend
>     for error in errors:
>                  ^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/jsonschema/_keywords.py", line 334, in allOf
>     yield from validator.descend(instance, subschema, schema_path=index)
>   File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 432, in descend
>     for error in errors:
>                  ^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/jsonschema/_keywords.py", line 275, in ref
>     yield from validator._validate_reference(ref=ref, instance=instance)
>                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 465, in _validate_reference
>     raise exceptions._WrappedReferencingError(err) from err
> jsonschema.exceptions._WrappedReferencingError: Unresolvable: /schemas/thermal/qcom-tsens.yaml#
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251201084140.376058-2-bisson.gary@gmail.com

This link gives me a 404 error, is it expected?

> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.

Couldn't reproduce, I can't seem to see any error/warning that would be
introduced by this patch, can the above be discarded then?

Regards,
Gary

Re: [PATCH 1/5] dt-bindings: vendor-prefixes: Add Ezurio LLC

[Krzysztof Kozlowski]

On 01/12/2025 11:04, Gary Bisson wrote:
>>
>> pip3 install dtschema --upgrade
>>
>> Please check and re-submit after running the above command yourself. Note
>> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
>> your schema. However, it must be unset to test all examples with your schema.
> 
> Couldn't reproduce, I can't seem to see any error/warning that would be
> introduced by this patch, can the above be discarded then?


Bot has a hiccup, you can ignore reports.

Best regards,
Krzysztof