From: Ashish Mhetre <amhetre@nvidia.com>
To: <will@kernel.org>, <robin.murphy@arm.com>, <joro@8bytes.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<nicolinc@nvidia.com>
Cc: <thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
<vdumpa@nvidia.com>, <jgg@ziepe.ca>,
<linux-arm-kernel@lists.infradead.org>, <iommu@lists.linux.dev>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, Ashish Mhetre <amhetre@nvidia.com>
Subject: [PATCH V4 3/3] arm64: dts: nvidia: Add nodes for CMDQV
Date: Fri, 5 Dec 2025 06:58:50 +0000 [thread overview]
Message-ID: <20251205065850.3841834-4-amhetre@nvidia.com> (raw)
In-Reply-To: <20251205065850.3841834-1-amhetre@nvidia.com>
The Command Queue Virtualization (CMDQV) hardware is part of the
SMMUv3 implementation on NVIDIA Tegra SoCs. It assists in
virtualizing the command queue for the SMMU.
Update SMMU compatible strings to use nvidia,tegra264-smmu to enable
CMDQV support. Add device tree nodes for the CMDQV hardware and enable
them on the tegra264-p3834 platform where SMMUs are enabled. Each SMMU
instance is paired with its corresponding CMDQV instance via the
nvidia,cmdqv property.
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
---
.../arm64/boot/dts/nvidia/tegra264-p3834.dtsi | 8 +++
arch/arm64/boot/dts/nvidia/tegra264.dtsi | 50 +++++++++++++++++--
2 files changed, 53 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi
index 06795c82427a..7e2c3e66c2ab 100644
--- a/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi
@@ -23,8 +23,16 @@ iommu@5000000 {
status = "okay";
};
+ cmdqv@5200000 {
+ status = "okay";
+ };
+
iommu@6000000 {
status = "okay";
};
+
+ cmdqv@6200000 {
+ status = "okay";
+ };
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
index f137565da804..9eb7058e3149 100644
--- a/arch/arm64/boot/dts/nvidia/tegra264.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
@@ -3361,7 +3361,7 @@ bus@8100000000 {
<0x02 0x00000000 0xd0 0x00000000 0x08 0x80000000>; /* ECAM, prefetchable memory, I/O */
smmu1: iommu@5000000 {
- compatible = "arm,smmu-v3";
+ compatible = "nvidia,tegra264-smmu", "arm,smmu-v3";
reg = <0x00 0x5000000 0x0 0x200000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 13 IRQ_TYPE_EDGE_RISING>;
@@ -3370,10 +3370,18 @@ smmu1: iommu@5000000 {
#iommu-cells = <1>;
dma-coherent;
+ nvidia,cmdqv = <&cmdqv1>;
+ };
+
+ cmdqv1: cmdqv@5200000 {
+ compatible = "nvidia,tegra264-cmdqv";
+ reg = <0x00 0x5200000 0x0 0x830000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
smmu2: iommu@6000000 {
- compatible = "arm,smmu-v3";
+ compatible = "nvidia,tegra264-smmu", "arm,smmu-v3";
reg = <0x00 0x6000000 0x0 0x200000>;
interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 2 IRQ_TYPE_EDGE_RISING>;
@@ -3382,6 +3390,14 @@ smmu2: iommu@6000000 {
#iommu-cells = <1>;
dma-coherent;
+ nvidia,cmdqv = <&cmdqv2>;
+ };
+
+ cmdqv2: cmdqv@6200000 {
+ compatible = "nvidia,tegra264-cmdqv";
+ reg = <0x00 0x6200000 0x0 0x830000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
mc: memory-controller@8020000 {
@@ -3437,7 +3453,7 @@ emc: external-memory-controller@8800000 {
};
smmu0: iommu@a000000 {
- compatible = "arm,smmu-v3";
+ compatible = "nvidia,tegra264-smmu", "arm,smmu-v3";
reg = <0x00 0xa000000 0x0 0x200000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
@@ -3446,10 +3462,18 @@ smmu0: iommu@a000000 {
#iommu-cells = <1>;
dma-coherent;
+ nvidia,cmdqv = <&cmdqv0>;
+ };
+
+ cmdqv0: cmdqv@a200000 {
+ compatible = "nvidia,tegra264-cmdqv";
+ reg = <0x00 0xa200000 0x0 0x830000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
smmu4: iommu@b000000 {
- compatible = "arm,smmu-v3";
+ compatible = "nvidia,tegra264-smmu", "arm,smmu-v3";
reg = <0x00 0xb000000 0x0 0x200000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
@@ -3458,6 +3482,14 @@ smmu4: iommu@b000000 {
#iommu-cells = <1>;
dma-coherent;
+ nvidia,cmdqv = <&cmdqv4>;
+ };
+
+ cmdqv4: cmdqv@b200000 {
+ compatible = "nvidia,tegra264-cmdqv";
+ reg = <0x00 0xb200000 0x0 0x830000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
i2c14: i2c@c410000 {
@@ -3690,7 +3722,7 @@ bus@8800000000 {
ranges = <0x00 0x00000000 0x88 0x00000000 0x01 0x00000000>;
smmu3: iommu@6000000 {
- compatible = "arm,smmu-v3";
+ compatible = "nvidia,tegra264-smmu", "arm,smmu-v3";
reg = <0x00 0x6000000 0x0 0x200000>;
interrupts = <GIC_SPI 225 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 226 IRQ_TYPE_EDGE_RISING>;
@@ -3699,6 +3731,14 @@ smmu3: iommu@6000000 {
#iommu-cells = <1>;
dma-coherent;
+ nvidia,cmdqv = <&cmdqv3>;
+ };
+
+ cmdqv3: cmdqv@6200000 {
+ compatible = "nvidia,tegra264-cmdqv";
+ reg = <0x00 0x6200000 0x0 0x830000>;
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
hda@90b0000 {
--
2.25.1
prev parent reply other threads:[~2025-12-05 6:59 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-05 6:58 [PATCH V4 0/3] Add device tree support for NVIDIA Tegra CMDQV Ashish Mhetre
2025-12-05 6:58 ` [PATCH V4 1/3] iommu/arm-smmu-v3: Add device-tree support for CMDQV driver Ashish Mhetre
2025-12-08 19:43 ` kernel test robot
2025-12-10 5:19 ` Ashish Mhetre
2025-12-10 12:39 ` Robin Murphy
2025-12-11 6:09 ` Nicolin Chen
2025-12-11 6:41 ` Ashish Mhetre
2025-12-05 6:58 ` [PATCH V4 2/3] dt-bindings: iommu: Add NVIDIA Tegra CMDQV support Ashish Mhetre
2025-12-05 6:58 ` Ashish Mhetre [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251205065850.3841834-4-amhetre@nvidia.com \
--to=amhetre@nvidia.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=iommu@lists.linux.dev \
--cc=jgg@ziepe.ca \
--cc=jonathanh@nvidia.com \
--cc=joro@8bytes.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=nicolinc@nvidia.com \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=thierry.reding@gmail.com \
--cc=vdumpa@nvidia.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).